Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould quick delivery electronic parts wholesale for andon electronics
Euromicron Mould quick delivery electronic parts wholesale for andon electronics

Euromicron Mould quick delivery electronic parts wholesale for andon electronics
  • Euromicron Mould quick delivery electronic parts wholesale for andon electronics
  • Euromicron Mould quick delivery electronic parts wholesale for andon electronics

Euromicron Mould quick delivery electronic parts wholesale for andon electronics

Euromicron Mould injection moldable plastics is manufactured in an exquisite manner. Especially the circuit fabrication, including the main electric circuit, control circuit, and signal circuit, is done under cutting-edge technologies. It supports cord-free operation with a rechargeable lithium-ion battery
Get the latest price
Quantity Needed:
Pieces
E-mail:


Euromicron Mould quick delivery electronic parts wholesale for andon electronics-1


◇◆ Product parameters


Part Name:switch
Part size:92.8*61.2*8.6mm
Raw Material:ABS
Color:RAL9010,White
Mould Cavity No.:1*4
Injection gate:Cold runner with sub gate
Surface finished: Polishing #600
Core &Cavity steel:M310,hardness 52~55HRC
Mold component standard:DME or equivalent
Injection machine size:250T
Cycle time:35S
Mold life:300000 shots
Customer:Siemens
Export:Uruguay


◇◆ Summary for project running
This product used for electrical appliance,the light switch.Plastic raw material need in inflaming retarding and heat resistant.
Euromicron Mould quick delivery electronic parts wholesale for andon electronics-2

We carried out first trial shot on 35th day,twice trial shots for samples production,and finished whole project in 45days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request. Due to many thin and high side ribs,part stick on core side tightly.Mold need smooth polishing and need enough ejection pins and as big as possible.Sink mark problem on surface easily to cause,due the part thickness is too thick and not equal,we solved it by adjusting injection parameter.Four hooks distance need to be molding in high precision location,Because they will assemble to bottom shelf.To make it work well,we cut material at first trial shot.After checking first samples,made correction to mold.So that the secondary samples met assembly requirement.

Euromicron Mould quick delivery electronic parts wholesale for andon electronics-3

Another problem we met on first trial shot was the ribs short shot.Because they were very thin and high,plastic filling easily to get cold when injection.Later we had a discussion,decided to change the side gate to two sub gates,change core cooling water to hot oil,100℃,and add injection pressure,so that filling time shorten a lot,finally we got excellent part. This experience also can apply to similar product with thin and high ribs.



Euromicron Mould injection moldable plastics will go through a complete analysis. The analysis includes safety, the mechanical performance of components, overall operational efficiency, and so forth. The level of classification will be prominently displayed in the form of a sticker attached on it
Euromicron Mould electronic parts has passed the following tests. They include statics testing, dynamics testing, the strength of materials testing, vibrations testing, reliability testing, and fatigue testing. It can be designed to be L Class, M Class, or H Class
Euromicron Mould electronic parts has been strictly evaluated. The assessments include finite element stress analysis of all components, fatigue analysis, load increase analysis, etc. It has passed various safety standards such as UL and cULus
Euromicron Mould injection moldable plastics has been tested by the in-house testing department. For example, the non-destructive testing processes such as pressure, vacuum and leak testing have been strictly performed. It can be converted to a blower easily
Euromicron Mould electronic parts meets the workmanship requirements for machinery. Its circuits, including main circuit, control circuit, and local circuits are all designed accurately with high efficiency. Its noise is very low at work
The product is safe to use. Those parts that are easily tossed out are equipped with safety devices such as a shield or protective screening. It has a light weight for easy carriage
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...