Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  > 

AI - Page Sitemap

 > 

Euromicron Mould quick delivery electronic housing customized for andon electronics

Euromicron Mould quick delivery electronic housing customized for andon electronics

Euromicron Mould quick delivery electronic housing customized for andon electronics

Part Name
Electronic connector
Part size
45*39.5*21mm
Raw Material
PA9T30GF
Color
RAL9005,Black
Mould Cavity No
1*4
Injection gate
Hot runner
Surface finished
VDI3400-33
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Enterprise Strength
  • Our excellence comes from the efforts of staff from such departments as R&D department, sales department, design department and production department. There are designers, R&D experts, and after-sales personnel in our company.
  • Euromicron abides by the service principle of 'customers from afar should be treated as distinguished guests'. We continuously improve the service model to provide quality services for customers.
  • Euromicron always sticks to our tenet of "quality comes first" by focusing on the quality control, service improvement, and fast response.
  • We have been dedicated to the manufacturing of cnc service for about years, and have become the leading enterprise in the industry. This enables us to introduce and operate a complete set of production equipment, and achieve intelligentization and standardization.
  • Since the establishment, our sales network has been continuously expanding to where our sales service is highly appraised by customers at home and abroad. In future, we would like to establish our marketing network overseas and expand the business further.
Company Advantages
1. Euromicron Mould plastic housing for electronics has to be tested before being assembled into the final product. Its every part such as hydraulic system, engine, and other moving parts will be scrutinized and debugged by mechanical engineering technicians.
2. electronic housing are recognized for their merits of plastic housing for electronics .
3. This product acts as an important element in interior decoration. It's no wonder that this product is becoming so popular among many designers and architects.


Euromicron Mould quick delivery electronic housing customized for andon electronics-1
Euromicron Mould quick delivery electronic housing customized for andon electronics-2


◇◆ Product parameters


Part Name:Electronic connector
Part size:45*39.5*21mm
Raw Material:PA9T30GF
Color:RAL9005,Black
Mould Cavity No.:1*4
Injection gate:Hot runner 
Surface finished: VDI3400-33
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:250T
Cycle time:40S
Mold life:100000 shots
Customer:Bitron
Export:Italy


◇◆ PRODUCT FEATURES
A connector shell was supposed to be molded in glass-fiber-reinforced,flame-retardant nylon.
Euromicron Mould quick delivery electronic housing customized for andon electronics-3

This connector include two different parts(upper and lower halves),were to be produced in a single mold.Prior to the start of production,the question arose as to whether a second gate might not be required to fill the part.To avoid weld lines and entrapped air.however,it might also be necessary to use only a single gate.This flexibility as to gating was supposed to be possible simple by switching a hot runner nozzle on or off.A further difficulty resulted from the small amount of space in which  the gates were to be located on the face of the molded part.All of these requirements were satisfied through the particular arrangement of the conductive,internally heated hot-runner system.

Euromicron Mould quick delivery electronic housing customized for andon electronics-4

Mold design-We made this mold with four cavity.Runner system consists of a heated sprue bushing,a hot-runner manifold and four hot-runner nozzles.The hot-runner nozzles have not been installed parallel to the longitudinal axis of the mold,but rather at an angle.In spite of the unfavorable geometric relationships,it is possible to gate each part on its face in this manner.This arrangement is possible,because the solidified melt in the outer regions of the hot-runner manifold and nozzle channels precludes any possibility of leakage.Each of the hot-runner nozzle is individually controlled and can thus be switched on or off as required.It is thus possible to fill the part through either on or two gates.These measures alone,however,would not have been adequate to vary the gating possibilities.Attention also have to be given to the hot-runner manifold to ensure that no melt stagnated at continuously high temperatures in the runner channels when the various gating possibility were being employed.




Company Features
1. The outstanding advantage of Euromicron Mould Engineering Limited is the strong manufacturing capability in plastic housing for electronics . We have become an expert in this field.
2. Located in the economic center of China, our factory is very close to the major ports and some highways. The convenient transportation enables us to deliver goods very quickly.
3. We bring a fresh perspective and infectious energy to every client relationship. Our emphasis on teamwork, trust, and tolerance for diverging opinions helps clients focus on their opportunities, build their capabilities and win the future. We adhere to sustainable development. During our production, we constantly look for new and innovative ways that are good to environments such as manufacturing our products in a safe, environmentally friendly, and economical way. We always adhere to the principle of running the business in good faith since establishment. Any vicious market competition, such as bidding up prices, offering inferior quality products will be seriously forbidden.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...