Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould quick delivery custom plastic enclosures electronics connector for andon electronics
Euromicron Mould quick delivery custom plastic enclosures electronics connector for andon electronics

Euromicron Mould quick delivery custom plastic enclosures electronics connector for andon electronics
  • Euromicron Mould quick delivery custom plastic enclosures electronics connector for andon electronics
  • Euromicron Mould quick delivery custom plastic enclosures electronics connector for andon electronics
  • Euromicron Mould quick delivery custom plastic enclosures electronics connector for andon electronics

Euromicron Mould quick delivery custom plastic enclosures electronics connector for andon electronics

Euromicron Mould Engineering Limited is an influential professional provider of plastic enclosure box.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Application Scope
Euromicron's injection mold can be used in multiple scenes.According to different needs of customers, Euromicron is capable of providing reasonable, comprehensive and optimal solutions for customers.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.
Company Advantages
1. In the developing stage of Euromicron Mould custom plastic enclosures electronics , the researchers use the plantar pressure scanner and three-dimensional scanner to take samples of foot structures.
2. Its quality is ensured by a comprehensive quality management system.
3. This product has achieved good results in practical applications.


Part Name:Electronic connector
Part size:18*15*3mm
Raw Material:NYLON+30%GF
Color:RAL9005,Black
Mould Cavity No.:16+16
Injection gate:Cold runner 
Surface finished: Polishing #600
Core &Cavity steel:1.2344, hardness 48~52HRC
Mold component standard:DME or equivalent
Injection machine size:120T
Cycle time:18S
Mold life:300000 shots
Customer:AEC
Export:USA


◇◆ Summary for project running
This product used for electrical connector. And was supposed to be molded in glass-fiber-reinforced, flame-retardant nylon.
Euromicron Mould quick delivery custom plastic enclosures electronics connector for andon electronics-1

There are many small pin holes on part. Hole’s diameter is 0.6mm with 2.2mm distance of each. Dimension tolerance should be within +/-0.01mm.   Mold design-We will make this mold with 2+2cavity, cold runner in to banana gate. To make parts leave on core side, parting line should be on top. And all pin holes location need to be inserted. Because the hole diameter and distance need to keep in strict tolerance. Separated insert make it easy to replace. Need to pay high attention to electrode making and EDM process. We made whole electrode include all pin holes position, then checked by CMM machine, until shown it was made in proper dimension, took to Mirror EDM manufacture.

Euromicron Mould quick delivery custom plastic enclosures electronics connector for andon electronics-2

Injection-Any mismatch or flash in switch(female half) hole would cause male half pin bend, so this request holding pressure not too high. but also guarantee not cause sink mark on outside surface. Although the part and mold is small, enough cooling line still necessary. Because the part quantity in demand is one million each month, we need to cut down cycle time as much as possible. So that we can save production cost.




Company Features
1. Euromicron Mould Engineering Limited is an influential professional provider of plastic enclosure box.
2. We have brought together a professional sales team. Embracing good communication skills and projects coordination capabilities, they are able to supply a whole set of product services to our clients.
3. Euromicron Mould Engineering Limited has been endeavoring to ensure the quality of the service. Please contact us! We desire to be a pioneer in the industry of electronic housing . Please contact us!
The quality control department must carry out rigorous testing on Euromicron Mould custom plastic enclosures electronics. These tests typically involve leakage detection, short circuit detection, and electrical load capability testing. NBC skin products supply skin’s much-needed nutrients to reinforce its self-repaired function
During the development stage of Euromicron Mould electronic housing, different factors have been taken into consideration. They are mainly structure stability, statics, mechanical properties, the whole efficiency, etc. NBC cosmetics help repair and hydrate the skin
The production of Euromicron Mould plastic enclosure box is eco-friendly and does not generate any water, air or noise pollution. And the cleaning process guarantees it is meticulously cleaned and free of dust and odor. NBC skin products supply skin’s much-needed nutrients to reinforce its self-repaired function
The creation of Euromicron Mould custom plastic enclosures electronics is in line with international electrical safety standards. It meets the requirements of IEC, EMC, CE marking, etc. NBC skin products keep your skin ecologically balanced and keep your skin healthy
The following tests must be performed in Euromicron Mould electronic housing production. These tests involve dielectric withstand inspection, insulation resistance inspection, leakage current inspection, and the like. NBC skin products effectively nourish the body
This product is safe to use. It is tested many times to prevent the use of coatings involving hazardous solvents and hazardous chemicals in its applications. NBC skin products effectively nourish the body
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...