Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould quick delivery communication processor supplier for electronic components
Euromicron Mould quick delivery communication processor supplier for electronic components

Euromicron Mould quick delivery communication processor supplier for electronic components
  • Euromicron Mould quick delivery communication processor supplier for electronic components
  • Euromicron Mould quick delivery communication processor supplier for electronic components
  • Euromicron Mould quick delivery communication processor supplier for electronic components

Euromicron Mould quick delivery communication processor supplier for electronic components

The design of Euromicron Mould plastic enclosures for electronics shows professionalism. It is carried out based on adequate research of feet shape and the principles of biomechanical comfort and stress distribution. It is resistant to wear and corrosion
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


Part Name:Gateway
Part size:175*136*32mm
Raw Material:ABS+PC
Color:RAL9010,White
Mould Cavity No.:1*1
Injection gate:Hot runner with pin point gate
Surface finished: Mirror Polishing
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:180T
Cycle time:35S
Mold life:300000 shots
Customer:HEKATR@N
Export:Germany


◇◆ Summary for project running
This product used for electrical appliance,the gateway case and grid.Plastic raw material need in inflaming retarding and heat resistant.
Euromicron Mould quick delivery communication processor supplier for electronic components-1

We carried out first trial shot on 40th day,little longer than planed.Since YUDO hot runner system came out of expected date,one week late.Three trial shots for samples production,and finished whole project in 50days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request.
Both parts critical surface need in high polishing,mirror grade,no any marked or scratch allowed.When production,have to take out by robot hand,and cover PE film for protection. Silkscreen also made by EMM factory.

Euromicron Mould quick delivery communication processor supplier for electronic components-2

At first trial shot,case part came out with obvious sink mark and scratch on side surface. The ribs inside are too thick cause sink mark,and no draft angle on side surface cause scratch when mold open.Finally We cut rib material solved sink mark problem.But no draft angle allowed on side surface,we had to add two sliders on both side,to ensure all outside surface look glossy.
The grid part has many small window and only 0.6mm thick.We found flowing mark at each window corner and short shot problem at first trial shot.Then we suggested change high polishing surface to fine texture,VDI3400-33,also change injection gate location,from both side for filling.Customer confirmed and part came out look good.




The fabrics of Euromicron Mould communication processor have been tested to prove its performance. These tests include dimensional stability testing, colorfastness testing, abrasion or pilling testing, etc. It has low-friction ball bearings, ensuring the efficient work of the product
Euromicron Mould communication processor has a great design. It is made after taking into account the colour, cut, decoration, materials, function and so forth. It is widely used in the chemical industry, metal & mining industry, etc
Before delivery, Euromicron Mould communication processor must be strictly tested. It is tested for measurement, color, cracks, thickness, integrity, and polish degree. It has abilities of interference resistance and vibration resistance
Euromicron Mould communication processor will be carefully inspected for its workmanship. It will be scrutinized in seaming (open seam, sufficient seam allowance, seam slippage, etc.), stitching (needle cutting, snared stitches, blind stitches, etc.), and washing (washing effect, cleaning mark, etc.) With a smart structure design, no debris will be left in it
Euromicron Mould plastic enclosures for electronics is scientifically designed. Basic knowledge such as Mechanics of Machines, Mechanics of Materials, Fluid Mechanics, Thermodynamics is used in its manufacture. It has an excellent nonlinearity correction function
This product has been reviewed and certified to meet the most stringent quality requirements. The sensor body can be customized for satisfying customers' needs
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...