Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould products plastic enclosure box supplier for electronic components
Euromicron Mould products plastic enclosure box supplier for electronic components

Euromicron Mould products plastic enclosure box supplier for electronic components
  • Euromicron Mould products plastic enclosure box supplier for electronic components
  • Euromicron Mould products plastic enclosure box supplier for electronic components
  • Euromicron Mould products plastic enclosure box supplier for electronic components

Euromicron Mould products plastic enclosure box supplier for electronic components

This product has electromagnetic compatibility. It has passed a comprehensive range of EMC tests such as conducted disturbances immunity testing, antenna screening effectiveness testing, and harmonic current emission testing.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
die casting mold is a truly cost-effective product. It is processed in strict accordance with relevant industry standards and is up to the national quality control standards. The quality is guaranteed and the price is really favorable.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Compared with other products in the industry, die casting mold has more obvious advantages which are reflected in the following aspects.
Company Advantages
1. Euromicron Mould plastic electrical enclosures is well manufactured. The process is carried out by our workers who handle the preparation and cutting of materials with a bar chart table and use numerically controlled lathes, saws, grinding machines.
2. This product has electromagnetic compatibility. It has passed a comprehensive range of EMC tests such as conducted disturbances immunity testing, antenna screening effectiveness testing, and harmonic current emission testing.
3. As we adhere to continuous innovation, the product will be given more advantages and will be more widely used in the future.
4. This product offered by Euromicron Mould is considered very useful in the industry.


Part Name:Gateway
Part size:175*136*32mm
Raw Material:ABS+PC
Color:RAL9010,White
Mould Cavity No.:1*1
Injection gate:Hot runner with pin point gate
Surface finished: Mirror Polishing
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:180T
Cycle time:35S
Mold life:300000 shots
Customer:HEKATR@N
Export:Germany


◇◆ Summary for project running
This product used for electrical appliance,the gateway case and grid.Plastic raw material need in inflaming retarding and heat resistant.
Euromicron Mould products plastic enclosure box supplier for electronic components-1

We carried out first trial shot on 40th day,little longer than planed.Since YUDO hot runner system came out of expected date,one week late.Three trial shots for samples production,and finished whole project in 50days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request.
Both parts critical surface need in high polishing,mirror grade,no any marked or scratch allowed.When production,have to take out by robot hand,and cover PE film for protection. Silkscreen also made by EMM factory.

Euromicron Mould products plastic enclosure box supplier for electronic components-2

At first trial shot,case part came out with obvious sink mark and scratch on side surface. The ribs inside are too thick cause sink mark,and no draft angle on side surface cause scratch when mold open.Finally We cut rib material solved sink mark problem.But no draft angle allowed on side surface,we had to add two sliders on both side,to ensure all outside surface look glossy.
The grid part has many small window and only 0.6mm thick.We found flowing mark at each window corner and short shot problem at first trial shot.Then we suggested change high polishing surface to fine texture,VDI3400-33,also change injection gate location,from both side for filling.Customer confirmed and part came out look good.




Company Features
1. Known for providing high-quality plastic electrical enclosures , Euromicron Mould Engineering Limited has been extensively recognized and accepted in the China market.
2. We have built an excellent team to meet the needs of customers to the greatest extent. The team consists of both developers and designers who are highly professional in product innovation and optimization.
3. We hope that in the future we could be a leading supplier in the industry. Call now! Euromicron Mould now always holds the firm idea that customer satisfaction is in the first place. Call now! Euromicron Mould Engineering Limited is in a leading position in domestic plastic enclosure box design and technical support. Euromicron Mould concentrates on supplying high quality service for clients. Call now!
The quality control department must carry out rigorous testing on Euromicron Mould plastic enclosure box. These tests typically involve leakage detection, short circuit detection, and electrical load capability testing. Its flat-lying seams will not cause friction to the skin
During the development stage of Euromicron Mould plastic electrical enclosures, different factors have been taken into consideration. They are mainly structure stability, statics, mechanical properties, the whole efficiency, etc. This product is available in a variety of colors
The production of Euromicron Mould plastic enclosure box is eco-friendly and does not generate any water, air or noise pollution. And the cleaning process guarantees it is meticulously cleaned and free of dust and odor. This product perfectly outlines the curve of women's bodies
The creation of Euromicron Mould plastic electrical enclosures is in line with international electrical safety standards. It meets the requirements of IEC, EMC, CE marking, etc. This product perfectly outlines the curve of women's bodies
The following tests must be performed in Euromicron Mould plastic electrical enclosures production. These tests involve dielectric withstand inspection, insulation resistance inspection, leakage current inspection, and the like. This product perfectly outlines the curve of women's bodies
This product is safe to use. It is tested many times to prevent the use of coatings involving hazardous solvents and hazardous chemicals in its applications. The design of this product keeps up with the trend
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...