Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  > 

AI - Page Sitemap

 > 

Euromicron Mould products electronic housing manufacturer for andon electronics

Euromicron Mould products electronic housing manufacturer for andon electronics

Euromicron Mould products electronic housing manufacturer for andon electronics

Part Name
socket
Part size
52*52*59mm
Raw Material
ABS
Color
Grey
Mould Cavity No
1*2
Injection gate
Cold runner with sub gate
Surface finished
VDI3400-33
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Details
Euromicron's cnc service has excellent performances, which are reflected in the following details.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Well-chosen in material, fine in workmanship, excellent in quality and favorable in price, Euromicron's cnc service is highly competitive in the domestic and foreign markets.
Application Scope
injection mold developed and produced by Euromicron is mainly applied to the following aspects.With many years of practical experience, Euromicron is capable of providing comprehensive and efficient one-stop solutions.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.
Company Advantages
1. The whole manufacture process for Euromicron Mould plastic enclosure for electronic products is finished by our experienced pprofessionals by using the latest advanced equipment.
2. Most professionals consider electronic housing to reliable and easily controlled.
3. All of our electronic housing is of good enough quality.
4. The advantage of shoes made from this kind of material is that they tend to be comparatively quite inexpensive for both the manufacturer and consumer as compared with other types of shoes.


Euromicron Mould products electronic housing manufacturer for andon electronics-1
Euromicron Mould products electronic housing manufacturer for andon electronics-2


◇◆ Product parameters


Part Name:socket
Part size:52*52*59mm
Raw Material:ABS
Color:Grey
Mould Cavity No.:1*2
Injection gate:Cold runner with sub gate
Surface finished: VDI3400-33
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:DME or equivalent
Injection machine size:180T
Cycle time:35S
Mold life:100000 shots
Customer:Siemens
Export:Uruguay


◇◆ PRODUCT FEATURES


Euromicron Mould products electronic housing manufacturer for andon electronics-3
Molded part

This socket has two slots on the two opposite sides close to the back wall.No witness marks from side sores or slides are permitted on the outer surface of the box between the upper edge and these openings.On the other had,sink marks are not allowed near the openings on both the side walls and inside of the box,since these areas are visible once the box is installed.

Mold design
The core of the mold,four small side holes are of conventional design.All remaining components are standard or off-the-shelf items.For instance,a standard mold base with dimensions of 200mmX300mm is employed.The mold shut height is 311mm,Plate thickness are also based on standard dimensions.
Steel grade 1.2344,through-hardened 48-52HRC,was employed for the mold cavity and core.An inner core with helical grooves provides cooling for the stationary-side mold plate. Given the art geometry and the requirement that there be no witness lines on the outside surface,the side cores for the round openings must be placed on the stationary side mold plate.
The ejector plate assembly is actuated by the ejector rod,which is connected to the injection machine ejector,All guiding and wear components have been treated with DME standard.



Company Features
1. With rich production experience for electronic housing , Euromicron Mould Engineering Limited can guarantee high quality.
2. The technicians who have been experienced in producing custom plastic box are well-equipped in our factory.
3. Euromicron Mould Engineering Limited will make persistent efforts on product’s quality and cost saving. Get info! Euromicron Mould Engineering Limited has a unique corporate advantage with its plastic prototype . Get info! Euromicron Mould Engineering Limited will fully focus on creating a innovative and scientific and techno-logic type company. Get info! Euromicron Mould has been continually developing its service quality to improve the customer satisfication domestically and internationally. Get info!
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...