Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould product plastic enclosure box wholesale for electronic components
Euromicron Mould product plastic enclosure box wholesale for electronic components

Euromicron Mould product plastic enclosure box wholesale for electronic components
  • Euromicron Mould product plastic enclosure box wholesale for electronic components
  • Euromicron Mould product plastic enclosure box wholesale for electronic components
  • Euromicron Mould product plastic enclosure box wholesale for electronic components
  • Euromicron Mould product plastic enclosure box wholesale for electronic components
  • Euromicron Mould product plastic enclosure box wholesale for electronic components

Euromicron Mould product plastic enclosure box wholesale for electronic components

In the process of developing better overmolding electronics , Euromicron Mould Engineering Limited has become one of the most experienced manufacturers in China.
Get the latest price
Quantity Needed:
Pieces
E-mail:
Enterprise Strength
  • Our excellence comes from the efforts of staff from such departments as R&D department, sales department, design department and production department. There are designers, R&D experts, and after-sales personnel in our company.
  • Euromicron has been constantly providing high-quality and excellent services for customers to meet their demand.
  • Euromicron always sticks to our tenet of "quality comes first" by focusing on the quality control, service improvement, and fast response.
  • We have been dedicated to the manufacturing of cnc service for about years, and have become the leading enterprise in the industry. This enables us to introduce and operate a complete set of production equipment, and achieve intelligentization and standardization.
  • Since the establishment, our sales network has been continuously expanding to where our sales service is highly appraised by customers at home and abroad. In future, we would like to establish our marketing network overseas and expand the business further.
Company Advantages
1. The manufacturing process of Euromicron Mould overmolding electronics is quality oriented.
2. This product has the required wear resistance. Its coating guarantees a certain degree of lubrication to eliminate excessive wear and avoid scratching, wear or sticking components.
3. The product works stable even in a humid environment. It does not prone to break down even the relative humidity of air is high.
4. This product is currently very popular in the market and is being adopted by more and more people.


Euromicron Mould product plastic enclosure box wholesale for electronic components-1
Euromicron Mould product plastic enclosure box wholesale for electronic components-2


◇◆ Product parameters


Part Name:Electronic connector
Part size:45*39.5*21mm
Raw Material:PA9T30GF
Color:RAL9005,Black
Mould Cavity No.:1*4
Injection gate:Hot runner 
Surface finished: VDI3400-33
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:250T
Cycle time:40S
Mold life:100000 shots
Customer:Bitron
Export:Italy


◇◆ PRODUCT FEATURES
A connector shell was supposed to be molded in glass-fiber-reinforced,flame-retardant nylon.
Euromicron Mould product plastic enclosure box wholesale for electronic components-3

This connector include two different parts(upper and lower halves),were to be produced in a single mold.Prior to the start of production,the question arose as to whether a second gate might not be required to fill the part.To avoid weld lines and entrapped air.however,it might also be necessary to use only a single gate.This flexibility as to gating was supposed to be possible simple by switching a hot runner nozzle on or off.A further difficulty resulted from the small amount of space in which  the gates were to be located on the face of the molded part.All of these requirements were satisfied through the particular arrangement of the conductive,internally heated hot-runner system.

Euromicron Mould product plastic enclosure box wholesale for electronic components-4

Mold design-We made this mold with four cavity.Runner system consists of a heated sprue bushing,a hot-runner manifold and four hot-runner nozzles.The hot-runner nozzles have not been installed parallel to the longitudinal axis of the mold,but rather at an angle.In spite of the unfavorable geometric relationships,it is possible to gate each part on its face in this manner.This arrangement is possible,because the solidified melt in the outer regions of the hot-runner manifold and nozzle channels precludes any possibility of leakage.Each of the hot-runner nozzle is individually controlled and can thus be switched on or off as required.It is thus possible to fill the part through either on or two gates.These measures alone,however,would not have been adequate to vary the gating possibilities.Attention also have to be given to the hot-runner manifold to ensure that no melt stagnated at continuously high temperatures in the runner channels when the various gating possibility were being employed.




Company Features
1. In the process of developing better overmolding electronics , Euromicron Mould Engineering Limited has become one of the most experienced manufacturers in China.
2. We have world-class manufacturing facilities. They are currently equipped with flexible production techniques, enhanced process efficiency methods, and state-of-the-art technologies. They not only increase the safety practices but also allow the company to deliver cost-competitive products.
3. Euromicron Mould Engineering Limited has built up complete quality control and service systems. Check it! Presenting high quality customer service has been always something that Euromicron Mould sticks to. Check it!
The materials of Euromicron Mould plastic enclosure box are strictly selected and their quality reaches the international packaging standards, which helps this product withstand the test of the time. The product meets the international high-cleanliness standard
The design of Euromicron Mould overmolding electronics is market-based. It is carefully designed based on dimensions, weight, and characteristics of the product to be packed. The product is known for its extraordinary sealing
When designing Euromicron Mould overmolding electronics, the design team invests plenty of time in market research on packing and printing industry. Meanwhile, they are trying best to bring innovative ideas into this product as many as possible. Its amazing flame retardancy is its virtue
The design of Euromicron Mould plastic enclosure box always follows the latest trend and will never go out of style. Its particular structure design is finished by utilizing CAD software. It can help our customers greatly save costs
The content on Euromicron Mould overmolding electronics is arranged reasonably. It is created by our professional designers who are equipped with packaging and printing knowledge and expertise. The product has fine high-temperature resistance
The product has passed through many quality tests and third-party certifications. The product has fine high-temperature resistance
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...