Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  > 

AI - Page Sitemap

 > 

Euromicron Mould product communication processor supplier for electronic components

Euromicron Mould product communication processor supplier for electronic components

Euromicron Mould product communication processor supplier for electronic components

Part Name
switch
Part size
92.8*61.2*8.6mm
Raw Material
ABS
Color
RAL9010,White
Mould Cavity No
1*4
Injection gate
Cold runner with sub gate
Surface finished
Polishing #600
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Details
Euromicron's injection mold has excellent performances, which are reflected in the following details.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Euromicron is certified by various qualifications. We have advanced production technology and great production capability. injection mold has many advantages such as reasonable structure, excellent performance, good quality, and affordable price.
Product Comparison
Good materials, advanced production technology, and fine manufacturing techniques are used in the production of cnc service. It is of fine workmanship and good quality and is well sold in the domestic market.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Compared with similar products, Euromicron's cnc service has the following advantages.
Company Advantages
1. The designers of Euromicron Mould injection molded electronics have earned years of experiences in the industry.
2. In our strict quality assurance procedures, any defects in the product are avoided or eliminated.
3. This product has been tested for good performance and durability.
4. People can trust that it is safe to wear. Containing no toxic chemical residues, such as formaldehyde and aromatic amine, it does no harm to people's health.


Euromicron Mould product communication processor supplier for electronic components-1


◇◆ Product parameters


Part Name:switch
Part size:92.8*61.2*8.6mm
Raw Material:ABS
Color:RAL9010,White
Mould Cavity No.:1*4
Injection gate:Cold runner with sub gate
Surface finished: Polishing #600
Core &Cavity steel:M310,hardness 52~55HRC
Mold component standard:DME or equivalent
Injection machine size:250T
Cycle time:35S
Mold life:300000 shots
Customer:Siemens
Export:Uruguay


◇◆ Summary for project running
This product used for electrical appliance,the light switch.Plastic raw material need in inflaming retarding and heat resistant.
Euromicron Mould product communication processor supplier for electronic components-2

We carried out first trial shot on 35th day,twice trial shots for samples production,and finished whole project in 45days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request. Due to many thin and high side ribs,part stick on core side tightly.Mold need smooth polishing and need enough ejection pins and as big as possible.Sink mark problem on surface easily to cause,due the part thickness is too thick and not equal,we solved it by adjusting injection parameter.Four hooks distance need to be molding in high precision location,Because they will assemble to bottom shelf.To make it work well,we cut material at first trial shot.After checking first samples,made correction to mold.So that the secondary samples met assembly requirement.

Euromicron Mould product communication processor supplier for electronic components-3

Another problem we met on first trial shot was the ribs short shot.Because they were very thin and high,plastic filling easily to get cold when injection.Later we had a discussion,decided to change the side gate to two sub gates,change core cooling water to hot oil,100℃,and add injection pressure,so that filling time shorten a lot,finally we got excellent part. This experience also can apply to similar product with thin and high ribs.



Company Features
1. Euromicron Mould Engineering Limited has topped No.1 in production and sales volume of communication processor in China for consecutive years.
2. Our manufacturing team consists of experienced specialists. With their years of expertise and great sensitivity, they can produce high-quality products both standard and custom.
3. Attaching importance of customer service will be beneficial to the development of Euromicron Mould. Please contact. Looking into future, Euromicron Mould will go on to pursue first-class service and to create greater value for all customers. Please contact. Euromicron Mould Engineering Limited will continue to offer high quality plastic prototype and professional service. Please contact.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...