Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould precision plastic prototype supplier for electronic components
Euromicron Mould precision plastic prototype supplier for electronic components

Euromicron Mould precision plastic prototype supplier for electronic components
  • Euromicron Mould precision plastic prototype supplier for electronic components
  • Euromicron Mould precision plastic prototype supplier for electronic components
  • Euromicron Mould precision plastic prototype supplier for electronic components

Euromicron Mould precision plastic prototype supplier for electronic components

Part Name...
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


Part Name:Gateway
Part size:175*136*32mm
Raw Material:ABS+PC
Color:RAL9010,White
Mould Cavity No.:1*1
Injection gate:Hot runner with pin point gate
Surface finished: Mirror Polishing
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:180T
Cycle time:35S
Mold life:300000 shots
Customer:HEKATR@N
Export:Germany


◇◆ Summary for project running
This product used for electrical appliance,the gateway case and grid.Plastic raw material need in inflaming retarding and heat resistant.
Euromicron Mould precision plastic prototype supplier for electronic components-1

We carried out first trial shot on 40th day,little longer than planed.Since YUDO hot runner system came out of expected date,one week late.Three trial shots for samples production,and finished whole project in 50days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request.
Both parts critical surface need in high polishing,mirror grade,no any marked or scratch allowed.When production,have to take out by robot hand,and cover PE film for protection. Silkscreen also made by EMM factory.

Euromicron Mould precision plastic prototype supplier for electronic components-2

At first trial shot,case part came out with obvious sink mark and scratch on side surface. The ribs inside are too thick cause sink mark,and no draft angle on side surface cause scratch when mold open.Finally We cut rib material solved sink mark problem.But no draft angle allowed on side surface,we had to add two sliders on both side,to ensure all outside surface look glossy.
The grid part has many small window and only 0.6mm thick.We found flowing mark at each window corner and short shot problem at first trial shot.Then we suggested change high polishing surface to fine texture,VDI3400-33,also change injection gate location,from both side for filling.Customer confirmed and part came out look good.




While manufacturing Euromicron Mould electronic communication equipment, only the safe material is chosen. This product can highlight the differences and features of printed things
Euromicron Mould electronic communication equipment is the one you should never miss as it is with practical and aesthetically-pleasing design. Its reasonable button layout offers convenient operation
Euromicron Mould plastic prototype comes in different eye-catching designs. This product is notable for precise positioning
As per the current industry standards, Euromicron Mould plastic prototype is manufactured using optimum quality material and sophisticated technology. The product does not need any warm-up time before printing
Euromicron Mould plastic prototype is fabricated combining with the simple and modern design concept. This product is notable for precise positioning
This product yields best-in-class thermal performance. The fiber-reinforced materials used with innovative designs carry improved thermal performance of this product. The product has a very sensitive and high precise scanner, which ensures high distinguishability
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...