Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould precision plastic prototype customized for andon electronics
Euromicron Mould precision plastic prototype customized for andon electronics

Euromicron Mould precision plastic prototype customized for andon electronics
  • Euromicron Mould precision plastic prototype customized for andon electronics
  • Euromicron Mould precision plastic prototype customized for andon electronics

Euromicron Mould precision plastic prototype customized for andon electronics

Euromicron Mould Engineering Limited has continued to improve plastic prototype quality management system. It is characterized by a very good surface finish
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. All the fabrics used in Euromicron Mould custom plastic enclosures electronics are lacking any sort of toxic chemicals such as banned Azo colorants, formaldehyde, pentachlorophenol, cadmium, and nickel. And they are OEKO-TEX certified.
2. Euromicron Mould Engineering Limited has continued to improve plastic prototype quality management system. It is characterized by a very good surface finish
3. The operating system of this product is relatively simple to operate, combining a powerful processing flow with a simple operation page. The product is easy to assemble and maintain


Euromicron Mould precision plastic prototype customized for andon electronics-1


◇◆ Product parameters


Part Name:switch
Part size:92.8*61.2*8.6mm
Raw Material:ABS
Color:RAL9010,White
Mould Cavity No.:1*4
Injection gate:Cold runner with sub gate
Surface finished: Polishing #600
Core &Cavity steel:M310,hardness 52~55HRC
Mold component standard:DME or equivalent
Injection machine size:250T
Cycle time:35S
Mold life:300000 shots
Customer:Siemens
Export:Uruguay


◇◆ Summary for project running
This product used for electrical appliance,the light switch.Plastic raw material need in inflaming retarding and heat resistant.
Euromicron Mould precision plastic prototype customized for andon electronics-2

We carried out first trial shot on 35th day,twice trial shots for samples production,and finished whole project in 45days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request. Due to many thin and high side ribs,part stick on core side tightly.Mold need smooth polishing and need enough ejection pins and as big as possible.Sink mark problem on surface easily to cause,due the part thickness is too thick and not equal,we solved it by adjusting injection parameter.Four hooks distance need to be molding in high precision location,Because they will assemble to bottom shelf.To make it work well,we cut material at first trial shot.After checking first samples,made correction to mold.So that the secondary samples met assembly requirement.

Euromicron Mould precision plastic prototype customized for andon electronics-3

Another problem we met on first trial shot was the ribs short shot.Because they were very thin and high,plastic filling easily to get cold when injection.Later we had a discussion,decided to change the side gate to two sub gates,change core cooling water to hot oil,100℃,and add injection pressure,so that filling time shorten a lot,finally we got excellent part. This experience also can apply to similar product with thin and high ribs.



Company Features
1. Euromicron Mould Engineering Limited is a leading plastic prototype manufacturer with its own R&D team, advanced production equipment and deep production experience. The strong R&D team guarantees the high-quality electronic parts products of Euromicron Mould Engineering Limited.
2. Euromicron Mould Engineering Limited has gathered a group of high-level researchers.
3. Strong technical force and efficient R&D team makes the victory of Euromicron Mould. All Euromicron Mould staff keeps our clients in mind and does the utmost to satisfy customers. Get an offer!
The raw materials of Euromicron Mould electronic parts such as fabrics and trims are strictly checked for flaws and defects to ensure the high quality of the finished product. Unlike the tank type, it eliminates the heat energy loss in preheating
The fabric of Euromicron Mould plastic prototype is sourced from reliable suppliers who have signed years of contracts with us to ensure the best fabric quality. It can be designed with overheat protection, dry heating protection, and leakage protection
Once the design of Euromicron Mould electronic parts is created, it is taken to a team of pattern cutters who put together the first prototypes. It is able to ensure the consistency of water temperature
Euromicron Mould electronic parts has undergone workmanship assessment to ensure that the stitching, construction, and embellishments can meet the needs of customers. It has a smooth surface with no burrs
The production process of Euromicron Mould custom plastic enclosures electronics is continuously inspected by our QC team to make sure that product quality is in line with garment standards and regulations. Its noiseless working condition provides an enjoyable bathing time
Product performance and quality are in line with industry specifications. Its noiseless working condition provides an enjoyable bathing time
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...