Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould precision plastic enclosure box customized for andon electronics
Euromicron Mould precision plastic enclosure box customized for andon electronics

Euromicron Mould precision plastic enclosure box customized for andon electronics
  • Euromicron Mould precision plastic enclosure box customized for andon electronics
  • Euromicron Mould precision plastic enclosure box customized for andon electronics
  • Euromicron Mould precision plastic enclosure box customized for andon electronics
  • Euromicron Mould precision plastic enclosure box customized for andon electronics
  • Euromicron Mould precision plastic enclosure box customized for andon electronics

Euromicron Mould precision plastic enclosure box customized for andon electronics

Euromicron Mould overmolding electronics goes through careful and sincere planning. Its design comprises of an ideal blend of art, aesthetics, creativity, and so forth. JLH products have passed CFR 1633 and BS 7177
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


Euromicron Mould precision plastic enclosure box customized for andon electronics-1
Euromicron Mould precision plastic enclosure box customized for andon electronics-2


◇◆ Product parameters


Part Name:Electronic connector
Part size:45*39.5*21mm
Raw Material:PA9T30GF
Color:RAL9005,Black
Mould Cavity No.:1*4
Injection gate:Hot runner 
Surface finished: VDI3400-33
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:250T
Cycle time:40S
Mold life:100000 shots
Customer:Bitron
Export:Italy


◇◆ PRODUCT FEATURES
A connector shell was supposed to be molded in glass-fiber-reinforced,flame-retardant nylon.
Euromicron Mould precision plastic enclosure box customized for andon electronics-3

This connector include two different parts(upper and lower halves),were to be produced in a single mold.Prior to the start of production,the question arose as to whether a second gate might not be required to fill the part.To avoid weld lines and entrapped air.however,it might also be necessary to use only a single gate.This flexibility as to gating was supposed to be possible simple by switching a hot runner nozzle on or off.A further difficulty resulted from the small amount of space in which  the gates were to be located on the face of the molded part.All of these requirements were satisfied through the particular arrangement of the conductive,internally heated hot-runner system.

Euromicron Mould precision plastic enclosure box customized for andon electronics-4

Mold design-We made this mold with four cavity.Runner system consists of a heated sprue bushing,a hot-runner manifold and four hot-runner nozzles.The hot-runner nozzles have not been installed parallel to the longitudinal axis of the mold,but rather at an angle.In spite of the unfavorable geometric relationships,it is possible to gate each part on its face in this manner.This arrangement is possible,because the solidified melt in the outer regions of the hot-runner manifold and nozzle channels precludes any possibility of leakage.Each of the hot-runner nozzle is individually controlled and can thus be switched on or off as required.It is thus possible to fill the part through either on or two gates.These measures alone,however,would not have been adequate to vary the gating possibilities.Attention also have to be given to the hot-runner manifold to ensure that no melt stagnated at continuously high temperatures in the runner channels when the various gating possibility were being employed.




Comprehensive tests are carried out on Euromicron Mould overmolding electronics. These tests help establish product compliance to standards such as ANSI/BIFMA, CGSB, GSA, ASTM, CAL TB 133 and SEFA. JLH products have passed CFR 1633 and BS 7177
The design of Euromicron Mould overmolding electronics has taken into account many factors. These factors include biomechanical comfort (plantar pressure), force distribution, fire resistance ability, and slip resistance. With refined techniques and automatic production, JLH mattresses are of excellent quality
The design of Euromicron Mould plastic enclosure box relies on different industrial cutting-edge techs. CAD pattern design tech, 2D/3D printing tech, and 3D digital human foot model collection tech have all adopted for the design. JLH products have passed CFR 1633 and BS 7177
Quality performance tests for Euromicron Mould overmolding electronics will be finished at the final stage. They include rubbing resistance tests, tensile strength tests, colorfastness, and anti-bacterial tests. With refined techniques and automatic production, JLH mattresses are of excellent quality
The assessment of Euromicron Mould overmolding electronics quality and performance is a mandatory step. The product will be checked for breathability, seam, stitch strength, colorfastness, stretchability, and so on. JLH mattress has passed ISO 9001 2000
Strict quality inspection ensures the quality of products. JLH mattresses ensures high-quality and comfortable sleeping
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...