Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould precision electronic housing customized for andon electronics
Euromicron Mould precision electronic housing customized for andon electronics

Euromicron Mould precision electronic housing customized for andon electronics
  • Euromicron Mould precision electronic housing customized for andon electronics
  • Euromicron Mould precision electronic housing customized for andon electronics

Euromicron Mould precision electronic housing customized for andon electronics

The inspections of Euromicron Mould plastic housing for electronics include attention to important checkpoints like shoe sizing, sole bonding, shoe stitching, as well as shoe symmetry. Cleanmo's sticky series all meet the most stringent requirements
Get the latest price
Quantity Needed:
Pieces
E-mail:


Euromicron Mould precision electronic housing customized for andon electronics-1


◇◆ Product parameters


Part Name:switch
Part size:92.8*61.2*8.6mm
Raw Material:ABS
Color:RAL9010,White
Mould Cavity No.:1*4
Injection gate:Cold runner with sub gate
Surface finished: Polishing #600
Core &Cavity steel:M310,hardness 52~55HRC
Mold component standard:DME or equivalent
Injection machine size:250T
Cycle time:35S
Mold life:300000 shots
Customer:Siemens
Export:Uruguay


◇◆ Summary for project running
This product used for electrical appliance,the light switch.Plastic raw material need in inflaming retarding and heat resistant.
Euromicron Mould precision electronic housing customized for andon electronics-2

We carried out first trial shot on 35th day,twice trial shots for samples production,and finished whole project in 45days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request. Due to many thin and high side ribs,part stick on core side tightly.Mold need smooth polishing and need enough ejection pins and as big as possible.Sink mark problem on surface easily to cause,due the part thickness is too thick and not equal,we solved it by adjusting injection parameter.Four hooks distance need to be molding in high precision location,Because they will assemble to bottom shelf.To make it work well,we cut material at first trial shot.After checking first samples,made correction to mold.So that the secondary samples met assembly requirement.

Euromicron Mould precision electronic housing customized for andon electronics-3

Another problem we met on first trial shot was the ribs short shot.Because they were very thin and high,plastic filling easily to get cold when injection.Later we had a discussion,decided to change the side gate to two sub gates,change core cooling water to hot oil,100℃,and add injection pressure,so that filling time shorten a lot,finally we got excellent part. This experience also can apply to similar product with thin and high ribs.



Each Euromicron Mould electronic housing is strictly manufactured. As soon as each department is finished with their assigned task, the shoe is passed on to the next manufacturing stage. A wide range of Cleanmo's cleanroom wipers is available to meet different needs
Euromicron Mould plastic housing for electronics has to be tested. It is carefully measured in terms of insole length, insole width, toe lift, heel height and back height for proper fitting, symmetry and sizing requirements. Cleanmo's cleaning kits are compatible for cleaning all major brands of card printers
Euromicron Mould plastic housing for electronics has passed the conducted basic physical tests including tensile property, elongation, rub fastness, flexing, stitch tear, and tongue tear strength. Cleanmo's cleaning kits are compatible for cleaning all major brands of card printers
Euromicron Mould plastic housing for electronics undergoes numerous stages of production before it is completed. These stages include designing, stamping, sewing (the pieces composing the shaft are sewn together), and die assembling. Japan made raw materials are imported for the production of cleanroom and ESD consumables
Once the pattern of Euromicron Mould electronic housing is designed, the pattern parts for the shoe upper will be cut by using computer-controlled knives and laser machines. Cleanmo's cleaning cards are widely accepted and endorsed by device manufacturers and professionals
It offers water penetration resistance. This level of water resistance is determined by the specifier based on one of the classes in BS EN 12154:2000 Curtain Walling, Watertightness, Performance Requirements and Classification. Cleanmo's cleanroom and ESD consumables are ISO certified
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...