Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould precision custom plastic box wholesale for electronic components
Euromicron Mould precision custom plastic box wholesale for electronic components

Euromicron Mould precision custom plastic box wholesale for electronic components
  • Euromicron Mould precision custom plastic box wholesale for electronic components
  • Euromicron Mould precision custom plastic box wholesale for electronic components
  • Euromicron Mould precision custom plastic box wholesale for electronic components

Euromicron Mould precision custom plastic box wholesale for electronic components

Part Name...
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
Euromicron pays great attention to integrity and business reputation. We strictly control the quality and production cost in the production. All these guarantee injection mold to be quality-reliable and price-favorable.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Euromicron guarantees cnc service to be high-quality by carrying out highly standardized production. Compared with other products in the same category, it has the following advantages.
  • v s
Application Scope
cnc service produced by Euromicron is applied to the following industries.Euromicron always pays attention to customers. According customers' actual needs, we could customize comprehensive and professional solutions for them.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.
Company Advantages
1. Conforming to the design standard, our custom plastic box is of high quality assurance.
2. It is less susceptible to mold, mildew, and rot. It will not retain moisture which can cause mold and mildew, and thereby causing respiratory problems, irritation, and other health issues.
3. Because of having a lot of merits, it is for sure that the product will have a bright market application future.
4. This product offers great possibilities for users and has a wide range of applications in the global market.


Part Name:Gateway
Part size:175*136*32mm
Raw Material:ABS+PC
Color:RAL9010,White
Mould Cavity No.:1*1
Injection gate:Hot runner with pin point gate
Surface finished: Mirror Polishing
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:180T
Cycle time:35S
Mold life:300000 shots
Customer:HEKATR@N
Export:Germany


◇◆ Summary for project running
This product used for electrical appliance,the gateway case and grid.Plastic raw material need in inflaming retarding and heat resistant.
Euromicron Mould precision custom plastic box wholesale for electronic components-1

We carried out first trial shot on 40th day,little longer than planed.Since YUDO hot runner system came out of expected date,one week late.Three trial shots for samples production,and finished whole project in 50days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request.
Both parts critical surface need in high polishing,mirror grade,no any marked or scratch allowed.When production,have to take out by robot hand,and cover PE film for protection. Silkscreen also made by EMM factory.

Euromicron Mould precision custom plastic box wholesale for electronic components-2

At first trial shot,case part came out with obvious sink mark and scratch on side surface. The ribs inside are too thick cause sink mark,and no draft angle on side surface cause scratch when mold open.Finally We cut rib material solved sink mark problem.But no draft angle allowed on side surface,we had to add two sliders on both side,to ensure all outside surface look glossy.
The grid part has many small window and only 0.6mm thick.We found flowing mark at each window corner and short shot problem at first trial shot.Then we suggested change high polishing surface to fine texture,VDI3400-33,also change injection gate location,from both side for filling.Customer confirmed and part came out look good.




Company Features
1. The quality and quantity of custom plastic box produced by Euromicron Mould Engineering Limited are among the leading level in China.
2. Supported by experienced technicians, Euromicron Mould has increased its popularity in communication processor industry.
3. We have a corporate culture of mutual respect, cross-collaboration, and inclusion, which enhances our operational excellence while making a positive impact in the lives of our customers and the communities we serve. We promise all of our business activities are conform to the legal statutes of China. We'll never produce unlicensed products or infringe copyrights. Our company's commitment to reducing the carbon footprint is unwavering. We will work hard to reduce indirect greenhouse gas emissions through the reduction of electrical consumption.
Every Euromicron Mould plastic case for electronics has undergone and passed stringent quality control tests. These quality control tests start with the knitting of the base fabric, followed by the inspection of every other element before the product is passed and cleared for delivery. One of the highlights is its precise dimensions
The quality control of Euromicron Mould communication processor is conducted rigorously in order to meet the requirements in the solar product industry. It is inspected in the short circuit protection, charge and discharge performance, as well as energy utilization capacity. The length of the product can be controllable
The surface treatment of Euromicron Mould plastic case for electronics mainly includes degreasing, anodizing, sandblasting, painting, and laser engraving. It has to go through surface inspection to guarantee burr free. With a manual pallet truck, it is very easy to move around
The design of Euromicron Mould communication processor complies with the most demanding requirements. It is carried out by our designers who take some factors into considerations, such as aesthetics, practicality, and acoustics. Its side plates are made of high-quality steel, ensuring maximum strength and durability
Euromicron Mould communication processor is professionally created under a strong design team who has excellent computer ability such as Autocad, Solidworks, CAD, and CAM. Based on the requirements, the color can be customized
Once opened, the product is able to provide full brightness without glare and glare. This product can emit the maximum light output in just a few seconds. It can help enterprises decrease the cost and increase work efficiency
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...