Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould parts auto body molding source now for businessman
Euromicron Mould parts auto body molding source now for businessman

Euromicron Mould parts auto body molding source now for businessman
  • Euromicron Mould parts auto body molding source now for businessman
  • Euromicron Mould parts auto body molding source now for businessman
  • Euromicron Mould parts auto body molding source now for businessman
  • Euromicron Mould parts auto body molding source now for businessman
  • Euromicron Mould parts auto body molding source now for businessman
  • Euromicron Mould parts auto body molding source now for businessman
  • Euromicron Mould parts auto body molding source now for businessman

Euromicron Mould parts auto body molding source now for businessman

Euromicron Mould Engineering Limited features its special design for auto body molding . The product is processed by about 400 staff with many years of experience
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Euromicron Mould Engineering Limited features its special design for auto body molding . The product is processed by about 400 staff with many years of experience
2. Because of having a lot of merits, it is for sure that the product will have a bright market application future. Fast shipment is guaranteed for the product to improve customer satisfaction
3. The surface of the product is flat and smooth. It is homogeneous regarding smoothness distribution due to RTM process technology. It keeps its appearance as bright and clean as a new one after long-term use
4. Featuring a high level of pressure sensitivity, this product has the intelligence to modify and navigate the lines to be smoother and more natural. Its design is supported by the professional project engineers who follow up the specific progress


Euromicron Mould parts auto body molding source now for businessman-1
Euromicron Mould parts auto body molding source now for businessman-2



◇◆ Product Features


Euromicron Mould parts auto body molding source now for businessman-3

The product is applied in the automobile Mercedes Benz. It is a part of the tank. It works in the high temperature environment. So it is made of the material PA66 with 30% glass fiber. This is a special heat-resistant material. Also it is a high strength engineering material. This composite materials have superiorities in size stability, formability, stretching resistance and impact resistance. This a long product. The length is 495mm. width is 76mm, height is 83mm. it is easy to deflect after injecting. So it is very important to solve deflect issue in the mold.


Euromicron Mould parts auto body molding source now for businessman-4

The mold is a two-cavities design with hot runner system. The valve gate of the hot runner system is directly on the part. We did mold flow analysis before mold design. Through technical analysis, we can estimate the deformation of the part and find some problems of injection molding. So that we saved some steel for late adjustment about deformation.Meanwhile, we did Some preventive measures for possible problems.

Euromicron Mould parts auto body molding source now for businessman-5

In this way, we can optimized the mold after trailing shoot until the molding was good. The structure of the part was a lot complex. There were some bosses and hooks at the side of the product. It needed several sliders to formed them. For cooling system, it was very important too. Good cooling system can decrease the deformation of the product and the cycle time. So we designed several sufficient cooling loops for this mold. Not only cooling loops were design in the core insert and cavity insert, but also cooling loops were designed in the sliders and the mold plate.

Euromicron Mould parts auto body molding source now for businessman-6

In that case, the temperature of the mold can be controlled well. And the product was very stable. The cycle time was about 41 seconds. By controlling the valves of the hot runner system, we can control the volume of each part and the balance of flowing. Because of the plastic material including 30%glass fiber, the steel of forming insert must be harden steel. We choose to use imported steel 1.2344 which hardness was about 52 HRC. The mold ran well. The mold run over 3 hours for testing before delivery to customer. Customer was satisfied the mold.



Company Features
1. Euromicron Mould attaches great importance to the value of technical strength to the quality of auto body molding .
2. Euromicron Mould Engineering Limited is capable of providing one stop solution for injection molded plastic parts . Inquire!
The whole production of Euromicron Mould injection molded plastic parts is finished by our professional craftsmen
Euromicron Mould injection molded plastic parts is designed with an aesthetically-pleasing look that sets it apart from the ordinary.
Euromicron Mould auto body molding is delicately manufactured and reflects a high level of technology.
Euromicron Mould injection molded plastic parts is manufactured by using the high precision equipment and the latest technology.
Euromicron Mould injection molded plastic parts is designed in line with the international production standards.
The product stands out for its high energy efficiency. Adopting low energy consumption technology, it only consumes little energy in operation.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...