Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould part automobile de gebrauchtwagen source now for merchant
Euromicron Mould part automobile de gebrauchtwagen source now for merchant

Euromicron Mould part automobile de gebrauchtwagen source now for merchant
  • Euromicron Mould part automobile de gebrauchtwagen source now for merchant
  • Euromicron Mould part automobile de gebrauchtwagen source now for merchant
  • Euromicron Mould part automobile de gebrauchtwagen source now for merchant

Euromicron Mould part automobile de gebrauchtwagen source now for merchant

The professional R&D foundation has helped Euromicron Mould Engineering Limited make great progress in the development of automobile de gebrauchtwagen .
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Euromicron Mould automotive plastic parts manufacturers designed and manufactured using the finest quality raw materials and the latest technology in accordance with the industry norms and standards. It does not contain any toxic material and meets the requirements of environmental protection
2. This product is practical and economical and thus has been accepted by many customers. The product can be applied in many industries, such as the automobile, house appliance, and medical industry
3. The quality inspection standard of the product conforms to international norm. Its quality has been certified under ISO14001:2004 and CE
4. automobile de gebrauchtwagen has remarkable performance. One-stop solutions are offered for the product, including design, manufacturing, and assembly
5. The product which has passed through many international certifications is highly dependable.The product is highly evaluated by many famous enterprises, such as Ford, Volkswagen, Toyota, and Honda


Euromicron Mould part automobile de gebrauchtwagen source now for merchant-1
Euromicron Mould part automobile de gebrauchtwagen source now for merchant-2



◇◆ Product Features


Euromicron Mould part automobile de gebrauchtwagen source now for merchant-3

According to customer's requirement, the mold was designed into 4 cavities mold. It was cooled by cold water. The part was foldable box. The concave shape of the cover was designed in the cavity side of the mold. In that case, the cover was easy to stick in the cavity side when opening the mold. The part should be damaged and deformed.


Euromicron Mould part automobile de gebrauchtwagen source now for merchant-4

To solve the problem, we designed a ejecting system in the cavity side of the mold. The ejecting system was actuated by two hydraulic cylinder. In this way, the cavity side was too thick. And the sprue was very long. It was bad for injecting. The cycle time of production increased. And more plastic material was wasted. The cost was increased a lot. So we suggest customer to add a hot runner system in the mold.

Euromicron Mould part automobile de gebrauchtwagen source now for merchant-5

The tip gate of the hot nozzle was directly on the part. So no plastic material was wasted on the cold runner and the cycle time was short. It was about 38 seconds. The link connected cover and frame, which's thickness was very critic. If it too thick, it was hard and very difficult to fold it. If it was too thin, it was difficult to fill full when injecting. And it was easy to break during in use. Also its lifetime was short. It can't meet the requirement of the part.

Euromicron Mould part automobile de gebrauchtwagen source now for merchant-6

To reach it, we adjusted the dimension of the link and did trail three times. Through continuous optimization, it worked very well finally. The mold was delivered to customer on time. The customer was very satisfied with the quality of the mold.



Company Features
1. The professional R&D foundation has helped Euromicron Mould Engineering Limited make great progress in the development of automobile de gebrauchtwagen .
2. Euromicron Mould Engineering Limited will maintain technological benefits and supply thoughtful and innovative answers. Get quote!
Our designers' great efforts in product innovation makes the design our Euromicron Mould automobile de gebrauchtwagen rather innovative and practical.
Euromicron Mould automotive plastic parts manufacturers is made as per the international quality standards.
The raw materials of Euromicron Mould automotive plastic parts manufacturers is purchased by a professional team.
Euromicron Mould automobile de gebrauchtwagen is produced based on the highest standards.
Euromicron Mould automotive plastic parts manufacturers is manufactured using state-of-the-art technology to guarantee the fine workmanship and smooth production.
The product has the advantage of low internal impedance. The resistivity of the active materials is relatively low and the quality of the contacts between the individual electrode particles is high.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...