Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould OEM ODM plastic injection parts tank for businessman
Euromicron Mould OEM ODM plastic injection parts tank for businessman

Euromicron Mould OEM ODM plastic injection parts tank for businessman
  • Euromicron Mould OEM ODM plastic injection parts tank for businessman
  • Euromicron Mould OEM ODM plastic injection parts tank for businessman
  • Euromicron Mould OEM ODM plastic injection parts tank for businessman
  • Euromicron Mould OEM ODM plastic injection parts tank for businessman
  • Euromicron Mould OEM ODM plastic injection parts tank for businessman
  • Euromicron Mould OEM ODM plastic injection parts tank for businessman
  • Euromicron Mould OEM ODM plastic injection parts tank for businessman

Euromicron Mould OEM ODM plastic injection parts tank for businessman

Euromicron Mould plastic injection parts is manufactured under modern management system.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Application Scope
As one of Euromicron's main products, injection mold has wide applications. It is mainly used in the following aspects.Euromicron could customize comprehensive and efficient solutions according to customers' different needs.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.
Company Advantages
1. Euromicron Mould plastic injection parts is manufactured under modern management system.
2. It is able to allow sweat to wick away instead of absorbing it, keeping the sleeper cooler and drier at night.
3. Years of use will not make electrical systems of this product unstable, nor will it pose a risk on people, such as electric leakage.


Euromicron Mould OEM ODM plastic injection parts tank for businessman-1
Euromicron Mould OEM ODM plastic injection parts tank for businessman-2



◇◆ Product Features


Euromicron Mould OEM ODM plastic injection parts tank for businessman-3

The product is applied in the automobile Mercedes Benz. It is a part of the tank. It works in the high temperature environment. So it is made of the material PA66 with 30% glass fiber. This is a special heat-resistant material. Also it is a high strength engineering material. This composite materials have superiorities in size stability, formability, stretching resistance and impact resistance. This a long product. The length is 495mm. width is 76mm, height is 83mm. it is easy to deflect after injecting. So it is very important to solve deflect issue in the mold.


Euromicron Mould OEM ODM plastic injection parts tank for businessman-4

The mold is a two-cavities design with hot runner system. The valve gate of the hot runner system is directly on the part. We did mold flow analysis before mold design. Through technical analysis, we can estimate the deformation of the part and find some problems of injection molding. So that we saved some steel for late adjustment about deformation.Meanwhile, we did Some preventive measures for possible problems.

Euromicron Mould OEM ODM plastic injection parts tank for businessman-5

In this way, we can optimized the mold after trailing shoot until the molding was good. The structure of the part was a lot complex. There were some bosses and hooks at the side of the product. It needed several sliders to formed them. For cooling system, it was very important too. Good cooling system can decrease the deformation of the product and the cycle time. So we designed several sufficient cooling loops for this mold. Not only cooling loops were design in the core insert and cavity insert, but also cooling loops were designed in the sliders and the mold plate.

Euromicron Mould OEM ODM plastic injection parts tank for businessman-6

In that case, the temperature of the mold can be controlled well. And the product was very stable. The cycle time was about 41 seconds. By controlling the valves of the hot runner system, we can control the volume of each part and the balance of flowing. Because of the plastic material including 30%glass fiber, the steel of forming insert must be harden steel. We choose to use imported steel 1.2344 which hardness was about 52 HRC. The mold ran well. The mold run over 3 hours for testing before delivery to customer. Customer was satisfied the mold.



Company Features
1. Euromicron Mould Engineering Limited is an important force in automotive molding market with strong influence and comprehensive competitiveness.
2. Our most valuable asset is our technical members. Their technical knowledge is the basis for the high quality which our customers rightfully expect from our company.
3. automobile parts is one of the reason that customers choose Euromicron Mould. Inquiry! Euromicron Mould Engineering Limited aims to provide customers with high-performance, professional and agile services. Inquiry! Euromicron Mould Engineering Limited firmly believes that quality above everything. Inquiry! Euromicron Mould Engineering Limited highly respects talents and plastic injection parts . Inquiry!
Euromicron Mould automobile parts has passed the necessary tests. They include functionality testing, strength testing, stiffness testing, wear testing, corrosion testing, and friction testing. The product can be printed with logos, pictures, texts, and signs based on customers' needs
Euromicron Mould plastic injection parts is produced under the support of high techs. They are energy-saving technology, operate and control system, and fabrication technique of mechanical parts. It has good insulation and flame resistance
Euromicron Mould automobile parts complies with all kinds of certifications. They may include CE certificate, UL certificate, CCC certificate, and CB certificate. The product features great smoothness on the surface
Every production step of Euromicron Mould automobile parts follows the requirements for manufacturing furniture. Its structure, materials, strength, and surface finishing are all handled finely by experts. The product has the advantage of piercing resistance
Before delivery, Euromicron Mould automobile parts has to go through a series of inspections, including voltage compatibility, working temperature, startup and shutdown time, etc. The high viscosity synthetic glue makes it feature strong bonding strength
The quality of this product is guaranteed with advanced manufacturing equipment and perfect quality guarantee system. It is often used in the pasting of the industries such as stickers, stationery, office, etc
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...