Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould OEM ODM plastic injection parts renovation solutions for trader
Euromicron Mould OEM ODM plastic injection parts renovation solutions for trader

Euromicron Mould OEM ODM plastic injection parts renovation solutions for trader
  • Euromicron Mould OEM ODM plastic injection parts renovation solutions for trader
  • Euromicron Mould OEM ODM plastic injection parts renovation solutions for trader
  • Euromicron Mould OEM ODM plastic injection parts renovation solutions for trader
  • Euromicron Mould OEM ODM plastic injection parts renovation solutions for trader

Euromicron Mould OEM ODM plastic injection parts renovation solutions for trader

The design of Euromicron Mould plastic injection parts is a highly creative – pushing the boundaries of what is technically possible.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


This is a door handle of automobile. The product needs electroplating. The finish is high gloss. The material is PC+ABS with electroplating grade.

Euromicron Mould OEM ODM plastic injection parts renovation solutions for trader-1
Euromicron Mould OEM ODM plastic injection parts renovation solutions for trader-2


◇◆ Product Features


The mold was built in 2005. It is two-cavity mold. Cold runner system. The part was ejected out by round ejector pin and sleeve ejector. The finish of the cavity is very important. The steel  NAK80 is used in the mold. The polishing grade is A3 (Ra0.032μm). It has high requirements not only for polishing itself but also for surface smoothness, smoothness and geometric accuracy. In order to obtain high-quality polishing effect, the most important thing is to have high-quality polishing tools and accessories such as whetstone, sandpaper and diamond grinding paste. And the choice of polishing process depends on the surface condition after the early processing, such as mechanical processing, edm, grinding and so on.

Euromicron Mould OEM ODM plastic injection parts renovation solutions for trader-3

Rough polished is the first step in polishing. After milling, edm, grinding and other processes of the surface can be selected in the speed of 35,000 to 40000rpm rotary surface polishing machine or ultrasonic grinding machine for polishing. Commonly used methods include using Φ3 mm in diameter, WA# 400 wheels to remove white edm layer. Then it is grinded by hand, and the strip is added with kerosene as lubricant or coolant. The general order of use is #180~#240~#320~#400~#600~#800~#1000. Semi-polishing is second step. It mainly use sandpaper. The Numbers of sandpaper are: #400~#600~#800~#1000~#1200~#1500. Fine polishing is the final step. Fine polishing mainly USES diamond abrasive paste. The usual grinding order to get diamonds to mix together with polishing wheels is to get 9 microns (#1800) to 6 microns (#3000) to 3 microns (#8000).

Diamond abrasive paste and polishing wheels can be used to remove the hair marks on #1200 and #1500 sandpaper. The carpeting and diamond paste are then polished to the tune of 1 microns to 1/2 microns to 1 microns to 1 quarter microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns. The polishing process to be over 1 microns (including 1 microns) to the accuracy requirements can be carried out in a clean polishing room at the die processing workshop. For more sophisticated polishing an absolutely clean space is required. Dust, smoke, dandruff and saliva can all be discarded after hours of work to obtain a highly precise polished surface.



The whole production of Euromicron Mould plastic injection parts is finished by our professional craftsmen
Euromicron Mould plastic injection parts is designed with an aesthetically-pleasing look that sets it apart from the ordinary.
Euromicron Mould plastic injection parts is delicately manufactured and reflects a high level of technology.
Euromicron Mould plastic injection parts is manufactured by using the high precision equipment and the latest technology.
Euromicron Mould plastic injection parts is designed in line with the international production standards.
The product stands out for its high energy efficiency. Adopting low energy consumption technology, it only consumes little energy in operation.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...