Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould OEM ODM mold maker renovation solutions for businessman
Euromicron Mould OEM ODM mold maker renovation solutions for businessman

Euromicron Mould OEM ODM mold maker renovation solutions for businessman
  • Euromicron Mould OEM ODM mold maker renovation solutions for businessman
  • Euromicron Mould OEM ODM mold maker renovation solutions for businessman
  • Euromicron Mould OEM ODM mold maker renovation solutions for businessman
  • Euromicron Mould OEM ODM mold maker renovation solutions for businessman
  • Euromicron Mould OEM ODM mold maker renovation solutions for businessman
  • Euromicron Mould OEM ODM mold maker renovation solutions for businessman
  • Euromicron Mould OEM ODM mold maker renovation solutions for businessman

Euromicron Mould OEM ODM mold maker renovation solutions for businessman

Euromicron Mould mold maker has gone through a series of complete production processes which include CAD software design, frame construction, and treatment of panel appearance. Our high quality Inflatable Water Park can greatly reduce the repair rate and make your business keep running smoothly
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


Euromicron Mould OEM ODM mold maker renovation solutions for businessman-1
Euromicron Mould OEM ODM mold maker renovation solutions for businessman-2



◇◆ Mold introduce


Euromicron Mould OEM ODM mold maker renovation solutions for businessman-3

This is a loudspeaker cover, which is used in QianTu car. The material is PC+ABS. The size of the part is 217*206*30mm. There are many small holes and thin ribs on the part. There are two stamps with month and years. The marks are recycle and name of plastic material. And five hooks are used to fix on the frame of loudspeaker. The finish is grain (VDI 3400 ref 30) on viewable surface and polished on the inner surface. No flash、injection gate、ejector mark and fault are allowed on the viewable surface. To produce the part, it need a injection mold with good venting and good finish.

Euromicron Mould OEM ODM mold maker renovation solutions for businessman-4

A mold with one cavity and hot runner system was built to produce the part. Five angular lifters were designed to form the hooks. The mold was cooled by cooling water. The cycle time was about 39 seconds. The part was ejector out by round ejecting pins. For the mold, the most important was to manufacture the area with small holes and the thin ribs. Core insert can't be milled by CNC and polished because there were too compact small holes and thin ribs.

Euromicron Mould OEM ODM mold maker renovation solutions for businessman-5

So it needed to make graphite electrode to do EDM. The finish of the surface is 4u-6u Rmax.In this way, the part can demould smoothly without polished. To get good surface of the electorde, it was very import to choice the graphite grade. The graphite must be high strength and fine particles. The size of the particles was about 1-5μm. Too many holes had an effect on flowing of the plastic material when injecting. It was easy to cause venting issue.

Euromicron Mould OEM ODM mold maker renovation solutions for businessman-6

So it needed a good venting system in the mold. So that some venting inserts were designed in the core side of the mold. To get the viewable surface with EDM texture VDI 3400 ref30, a big copper electrode was made to do EDM. It was a high precision electrode. Also it was done in a good EDM machine. To make lifters moving smoothly, the holes of the lifters were made by slow wire cutting. And a copper guide block was designed for the lifter.



The development of Euromicron Mould mold maker adopts different advanced technologies. It is developed under the enlightenment of energy keeping and ultra-quiet technologies. Originally created eyelet connection system by Bouncia makes the whole park very stable
Euromicron Mould mold maker is generally tested under a simulated environment. These tests may include fatigue testing for electronic components and thermal insulation performance testing for materials. Our Inflatable Water Park are safe and harmless
The electric performance test of Euromicron Mould mold maker is conducted at the quality inspection stage. The main electrical performance index such as capacity, internal resistance, lifespan, and short circuit protection will be tested by the QC team. Our water parks has little tendency to leak and has good floating qualities
The design of Euromicron Mould mold maker is professional. It involves circuit design (usually via computer drafting software), printed circuit design, and housing design. Our Inflatable Water Park is especially suitable for the strong UV and high temperature area
Euromicron Mould mold maker has been tested. It has achieved a BS 5234-2: 1992 severe duty rating which is conducted by an accredited laboratory. Originally created eyelet connection system by Bouncia makes the whole park very stable
The product is resistant to flaking. After withstanding a certain sharp temperature change or collision, it will not easily fail. Bouncia is a manufacturer who is specialized in air sealed inflatable products, especially floating waterpark games
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...