auto door molding | Automobile

Enterprise Strength

Our excellence comes from the efforts of staff from such departments as R&D department, sales department, design department and production department. There are designers, R&D experts, and after-sales personnel in our company.
Euromicron not only pays attention to product sales but also strives to meet the diversified needs of customers. Our goal is to bring customers a relaxing and enjoyable experience.
Euromicron always sticks to our tenet of "quality comes first" by focusing on the quality control, service improvement, and fast response.
We have been dedicated to the manufacturing of cnc service for about years, and have become the leading enterprise in the industry. This enables us to introduce and operate a complete set of production equipment, and achieve intelligentization and standardization.
Since the establishment, our sales network has been continuously expanding to where our sales service is highly appraised by customers at home and abroad. In future, we would like to establish our marketing network overseas and expand the business further.

Application Scope

With wide application, injection mold is suitable for various industries. Here are a few application scenes for you.Euromicron insists on providing customers with reasonable solutions according to their actual needs.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.

Company Advantages
1. The quality control of Euromicron Mould injection molded plastic parts not only relies on manual inspection but also advanced technology such as computerized testing and hardness testers.
2. As any defects are completely eliminated in the inspection process, the product is always in the best quality state.
3. Every detail of auto door molding during the process of production is highly valued to ensure quality.

This is a door handle of automobile. The product needs electroplating. The finish is high gloss. The material is PC+ABS with electroplating grade.

Euromicron Mould OEM ODM injection molded plastic parts nissan for merchant-1

Euromicron Mould OEM ODM injection molded plastic parts nissan for merchant-2

◇◆ Product Features

The mold was built in 2005. It is two-cavity mold. Cold runner system. The part was ejected out by round ejector pin and sleeve ejector. The finish of the cavity is very important. The steel NAK80 is used in the mold. The polishing grade is A3 (Ra0.032μm). It has high requirements not only for polishing itself but also for surface smoothness, smoothness and geometric accuracy. In order to obtain high-quality polishing effect, the most important thing is to have high-quality polishing tools and accessories such as whetstone, sandpaper and diamond grinding paste. And the choice of polishing process depends on the surface condition after the early processing, such as mechanical processing, edm, grinding and so on.

Euromicron Mould OEM ODM injection molded plastic parts nissan for merchant-3

Rough polished is the first step in polishing. After milling, edm, grinding and other processes of the surface can be selected in the speed of 35,000 to 40000rpm rotary surface polishing machine or ultrasonic grinding machine for polishing. Commonly used methods include using Φ3 mm in diameter, WA# 400 wheels to remove white edm layer. Then it is grinded by hand, and the strip is added with kerosene as lubricant or coolant. The general order of use is #180~#240~#320~#400~#600~#800~#1000. Semi-polishing is second step. It mainly use sandpaper. The Numbers of sandpaper are: #400~#600~#800~#1000~#1200~#1500. Fine polishing is the final step. Fine polishing mainly USES diamond abrasive paste. The usual grinding order to get diamonds to mix together with polishing wheels is to get 9 microns (#1800) to 6 microns (#3000) to 3 microns (#8000).

Diamond abrasive paste and polishing wheels can be used to remove the hair marks on #1200 and #1500 sandpaper. The carpeting and diamond paste are then polished to the tune of 1 microns to 1/2 microns to 1 microns to 1 quarter microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns. The polishing process to be over 1 microns (including 1 microns) to the accuracy requirements can be carried out in a clean polishing room at the die processing workshop. For more sophisticated polishing an absolutely clean space is required. Dust, smoke, dandruff and saliva can all be discarded after hours of work to obtain a highly precise polished surface.

Company Features
1. Euromicron Mould Engineering Limited prevails over other players in the auto door molding industry by high-quality manufacture.
2. As the main force in auto parts factory industry, Euromicron Mould put relentless efforts into designing and manufacturing injection molded plastic parts .
3. As long as their is need, Euromicron Mould Engineering Limited will help our customers at our earliest time. Get more info! Our vision is automobile parts . Get more info! Euromicron Mould Engineering Limited always regards plastic part design for injection molding as the force for enhancing product competitiveness. Get more info! Euromicron Mould Engineering Limited has built up complete quality control and service systems. Get more info!

n******v

Euromicron Mould automobile parts is designed and manufactured under the supervision of experts by employing the latest technology following industry standards. It is marketed under our own brand namely Ambition Mods which will soon be a leader in this field

g******v

Euromicron Mould automobile parts is made under powerful productivity with excellent equipment and advanced technology. Well trained engineers and workers are strong support to its manufacturing

e******c

Combining the lean production method with innovation and thoughtful design, Euromicron Mould auto parts factory is exquisite in every detail. It can be delivered fast thanks to our location in Shenzhen which enjoys traffic convenience

d******k

The technology used to manufacture Euromicron Mould auto door molding is innovative and advanced, ensuring standardization production. It is designed to be elegant and modern

z******j

Euromicron Mould injection molded plastic parts is made as per international industry standards. Innovation is always made to update the product and meet the market demand

r******q

This product has a durable surface. It has passed the surface testing which assesses its resistance to water or cleaning products as well as scratches or abrasion. The newest manufacturing methods are adopted to guarantee its appearance and feel