Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould OEM ODM ebay automobile gebraucht one-stop service supplier for businessman
Euromicron Mould OEM ODM ebay automobile gebraucht one-stop service supplier for businessman

Euromicron Mould OEM ODM ebay automobile gebraucht one-stop service supplier for businessman
  • Euromicron Mould OEM ODM ebay automobile gebraucht one-stop service supplier for businessman
  • Euromicron Mould OEM ODM ebay automobile gebraucht one-stop service supplier for businessman

Euromicron Mould OEM ODM ebay automobile gebraucht one-stop service supplier for businessman

The design of Euromicron Mould injection molding automotive parts is carefully conducted. Its electric circuit parts are finely arranged after consideration of circuit compatibility.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
Under the guidance of market, Euromicron constantly strives for innovation. die casting mold has reliable quality, stable performance, good design, and great practicality.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods. die casting mold in Euromicron has the following advantages, compared with same kind of products in the market.
Product Details
With the pursuit of excellence, Euromicron is committed to showing you unique craftsmanship in details.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Euromicron carefully selects quality raw materials. Production cost and product quality will be strictly controlled. This enables us to produce injection mold which is more competitive than other products in the industry. It has advantages in internal performance, price, and quality.
Company Advantages
1. The design of Euromicron Mould injection molding automotive parts is carefully conducted. Its electric circuit parts are finely arranged after consideration of circuit compatibility.
2. This product works only needing little energy. It can guarantee the desired working efficiency with much less power consumption.
3. This product has the outstanding characteristics of ultra-light, ultra-thin, wear-resistant and impact-resistant, which can keep the spectacle lens natural for a long time.
4. The product is specially adapted design and suits the specific requirements of the operators and the various environmental conditions available.


This trail mold was used to injection Auto door plastic part in different thermoplastics, such as  PC/ABS blend and modified PA, elastomer-modified PC, PC/PBTP blend and modified PBTTB for a number of manufacturing companies.
The two-cavities mold for Auto door plastic part consists essentially of sprue half with the hot runner system and the ejector mold half. Pillars and bushings serve to guide the two mold halves. When the mold is closed. The mold halves are fixed relative to each other via angled surfaces and wear plates.
Gating and temperature control. The molding compound passes through a sprue bushing into the hot runner made of steel (material number 1.2311). From four heated nozzles, also of steel (material number 1.2162), it passes through cold feed channels to the various gates of the mold cavity. The gates measure 15 mm X 1.2 mm.

Euromicron Mould OEM ODM ebay automobile gebraucht one-stop service supplier for businessman-1

The hot runner manifold block is heated by cartridge heaters which are pressed against it by laterally bolted cover strips. The distributor lies in a recess of the feed-side mold plate and is pressed by the hot runner covering plate against the nozzles via spacer rings. Guide components prevent the manifold from twisting about the locating device. They also allow the manifold to expand and contract during heating and cooling. The hot runner nozzles are each centered in their locator bores in mold plate by means of three contact surfaces in such a way that they do not experience the expansion and contraction undergone by the manifold. The contact surfaces facing the manifold are convex. Transfer areas for the molding compound are sealed with steel O-rings. The ends of the hot runner nozzles on the mold side have conical bores. In this region. Their exteriors fit snugly into the mold platen to ensure good thermal conduction and thus rapid cooling of the sprue formed therein.

On mold opening, the frozen sprue separates from the hot melt in the manifold at the narrowest point of the conical bore. The nozzles are heated with heating collars. Two temperature probes are attached to each nozzle to monitor and regulate the temperature. The cartridge heaters in the manifold are arranged in seven groups, each of which is individually regulated. The cartridges have an installed rating of about 40 KW.
The melt pressure in the manifold is registered by pressure sennsor P. and that in the cavity, by sensor P. and cann therefore be used for control purposes. The temperature-control system consists of a network of bores in the two mold hales. Heat sensors T measure the temperature in the mold.
Ejection of the Auto door plastic part
When the mold opens, the molded part remains in the moving half. The sprues are also held in place by sprue pullers above the ejector pins. As soon as the stripper plates are pushed forward by the ejector of the machine, the ejector pins push the molded part along with the sprues from the mold core. On mold closing, the ejector plates and thus also the ejector pins are pushed back by ejector-plate return pins. The mold plate is supported by rolls projecting right through the ejector plates to the clamping plate.



Company Features
1. Euromicron Mould still continues to make rapid progress in the ebay automobile gebraucht industry.
2. Being qualified with the authoritative certifications, we are more confident to produce automobile 24 de with injection molding automotive parts .
3. ​​The quality of the Euromicron Mould branded products is consistent. Call! We have a clear and motivating operational principle. We operate our business according to a strong set of values and ideals, which guides our employees to work and interact with teammates and customers. Call! Euromicron Mould has successfully built itself into a brand that represents "High Quality" in both products and services.
ebay automobile gebraucht is of novel design and has characteristics of ebay automobile gebraucht.
Reasonable structure, low cost, and harmony outlook is a new concept and trend in automobile 24 de design.
The design for our ebay automobile gebraucht is simple but practical.
ebay automobile gebraucht adopts the structure of ebay automobile gebraucht and exhibits such features like ebay automobile gebraucht.
With its properties like ebay automobile gebraucht, ebay automobile gebraucht occupy a magnificent place in ebay automobile gebraucht market.
The product features temperatures resistance. The variations of temperature will not produce significant deviations in the hardness of the material or the resistance to fatigue, nor in any of his other mechanical properties.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...