Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould OEM ODM car moulding one-stop service supplier for merchant
Euromicron Mould OEM ODM car moulding one-stop service supplier for merchant

Euromicron Mould OEM ODM car moulding one-stop service supplier for merchant
  • Euromicron Mould OEM ODM car moulding one-stop service supplier for merchant
  • Euromicron Mould OEM ODM car moulding one-stop service supplier for merchant
  • Euromicron Mould OEM ODM car moulding one-stop service supplier for merchant
  • Euromicron Mould OEM ODM car moulding one-stop service supplier for merchant
  • Euromicron Mould OEM ODM car moulding one-stop service supplier for merchant
  • Euromicron Mould OEM ODM car moulding one-stop service supplier for merchant
  • Euromicron Mould OEM ODM car moulding one-stop service supplier for merchant

Euromicron Mould OEM ODM car moulding one-stop service supplier for merchant

The design of Euromicron Mould car moulding adopts the advanced technologies and software which include computer-aided design (CAD), computer-aided modeling (CAM), etc. The product is microwave and refrigerator safe
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


Euromicron Mould OEM ODM car moulding one-stop service supplier for merchant-1
Euromicron Mould OEM ODM car moulding one-stop service supplier for merchant-2



◇◆ Mold introduce


Euromicron Mould OEM ODM car moulding one-stop service supplier for merchant-3

This is a loudspeaker cover, which is used in QianTu car. The material is PC+ABS. The size of the part is 217*206*30mm. There are many small holes and thin ribs on the part. There are two stamps with month and years. The marks are recycle and name of plastic material. And five hooks are used to fix on the frame of loudspeaker. The finish is grain (VDI 3400 ref 30) on viewable surface and polished on the inner surface. No flash、injection gate、ejector mark and fault are allowed on the viewable surface. To produce the part, it need a injection mold with good venting and good finish.

Euromicron Mould OEM ODM car moulding one-stop service supplier for merchant-4

A mold with one cavity and hot runner system was built to produce the part. Five angular lifters were designed to form the hooks. The mold was cooled by cooling water. The cycle time was about 39 seconds. The part was ejector out by round ejecting pins. For the mold, the most important was to manufacture the area with small holes and the thin ribs. Core insert can't be milled by CNC and polished because there were too compact small holes and thin ribs.

Euromicron Mould OEM ODM car moulding one-stop service supplier for merchant-5

So it needed to make graphite electrode to do EDM. The finish of the surface is 4u-6u Rmax.In this way, the part can demould smoothly without polished. To get good surface of the electorde, it was very import to choice the graphite grade. The graphite must be high strength and fine particles. The size of the particles was about 1-5μm. Too many holes had an effect on flowing of the plastic material when injecting. It was easy to cause venting issue.

Euromicron Mould OEM ODM car moulding one-stop service supplier for merchant-6

So it needed a good venting system in the mold. So that some venting inserts were designed in the core side of the mold. To get the viewable surface with EDM texture VDI 3400 ref30, a big copper electrode was made to do EDM. It was a high precision electrode. Also it was done in a good EDM machine. To make lifters moving smoothly, the holes of the lifters were made by slow wire cutting. And a copper guide block was designed for the lifter.



The production process of Euromicron Mould car moulding is continuously inspected by our QC team to make sure that product quality is in line with garment standards and regulations. The product has strong toughness and is not easy to be punctured
The production of Euromicron Mould car moulding is rigorously undertaken by the factory itself, inspected by the third-party authorities. Especially the inner parts, such as food trays, are required to pass the tests including chemical release testing and high-temperature withstanding capacity. It does not affect the soil structure after it biodegrades
Euromicron Mould car moulding is completed by our professional architects and engineers who consider every project carefully such as the location, topography, climate, and culture. The water-based ink and glue used in the product comply with the food contact materials regulations
Euromicron Mould car moulding is carried out by our designers who aim to maintain and improve the lifestyle of customers by delivering the most effective and innovative wellness sauna product. The use of this product significantly helps reduce white plastic pollution
The hardware components of Euromicron Mould car moulding have been tested by a third-party testing organization, passing the FCC, CE and ROHS safety certification. Made of food-grade material, it can be used for hot food service ware
It is thoroughly inspected to ensure zero defects. Its thickness can be customized, ranging from 150gram to 350gram
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...