The design of Euromicron Mould injection molded parts involves several kinds of aspects. They include safety, reliability, utility, manufacturability, life cycle, and maintenance. 2.
The product features vibration resistance. By reducing the amplitude and frequency of the vibrational waves, it outwardly disperses the energy caused by vibrations. 3.
The product has less microbial contaminants. Produced in the dust-free workshop, the microbial contaminations can not easily get into this product. 4.
The product is well-received in the global market and enjoys a bright market prospect. 5.
The product has a great future in this realm because of its remarkable economic return.
◇◆ Product Features
According to customer's requirement, the mold was designed into 4 cavities mold. It was cooled by cold water. The part was foldable box. The concave shape of the cover was designed in the cavity side of the mold. In that case, the cover was easy to stick in the cavity side when opening the mold. The part should be damaged and deformed.
To solve the problem, we designed a ejecting system in the cavity side of the mold. The ejecting system was actuated by two hydraulic cylinder. In this way, the cavity side was too thick. And the sprue was very long. It was bad for injecting. The cycle time of production increased. And more plastic material was wasted. The cost was increased a lot. So we suggest customer to add a hot runner system in the mold.
The tip gate of the hot nozzle was directly on the part. So no plastic material was wasted on the cold runner and the cycle time was short. It was about 38 seconds. The link connected cover and frame, which's thickness was very critic. If it too thick, it was hard and very difficult to fold it. If it was too thin, it was difficult to fill full when injecting. And it was easy to break during in use. Also its lifetime was short. It can't meet the requirement of the part.
To reach it, we adjusted the dimension of the link and did trail three times. Through continuous optimization, it worked very well finally. The mold was delivered to customer on time. The customer was very satisfied with the quality of the mold.
Euromicron Mould Engineering Limited is an international company with rich experience in injection molded parts design. 2.
Relying on the advantages of technological innovation, it actively contributes to the popularity of car moldings . 3.
We adequately identify and assess the environmental and social impacts and manage them through a systematic approach by reducing waste and pollution and sustainably use natural resources. Call! Euromicron Mould Engineering Limited is committed to becoming a stable supplier in the custom injection molding companies global market. Euromicron Mould Engineering Limited aims to achieve global development in the auto door molding industry. Call!