Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould OEM ODM car body molding source now for merchant
Euromicron Mould OEM ODM car body molding source now for merchant

Euromicron Mould OEM ODM car body molding source now for merchant
  • Euromicron Mould OEM ODM car body molding source now for merchant
  • Euromicron Mould OEM ODM car body molding source now for merchant

Euromicron Mould OEM ODM car body molding source now for merchant

Euromicron Mould products made by injection moulding is well developed using modern machinery and production technology.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Details
Euromicron pursues excellent quality and strives for perfection in every detail during the production.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Euromicron pays great attention to integrity and business reputation. We strictly control the quality and production cost in the production. All these guarantee cnc service to be quality-reliable and price-favorable.
Company Advantages
1. Euromicron Mould products made by injection moulding is well developed using modern machinery and production technology.
2. This product has the required precision. It provides enough dynamic precision for the program without any human error.
3. The offered product is valued for their huge benefits like compatibility and usability.


This trail mold was used to injection Auto door plastic part in different thermoplastics, such as  PC/ABS blend and modified PA, elastomer-modified PC, PC/PBTP blend and modified PBTTB for a number of manufacturing companies.
The two-cavities mold for Auto door plastic part consists essentially of sprue half with the hot runner system and the ejector mold half. Pillars and bushings serve to guide the two mold halves. When the mold is closed. The mold halves are fixed relative to each other via angled surfaces and wear plates.
Gating and temperature control. The molding compound passes through a sprue bushing into the hot runner made of steel (material number 1.2311). From four heated nozzles, also of steel (material number 1.2162), it passes through cold feed channels to the various gates of the mold cavity. The gates measure 15 mm X 1.2 mm.

Euromicron Mould OEM ODM car body molding source now for merchant-1

The hot runner manifold block is heated by cartridge heaters which are pressed against it by laterally bolted cover strips. The distributor lies in a recess of the feed-side mold plate and is pressed by the hot runner covering plate against the nozzles via spacer rings. Guide components prevent the manifold from twisting about the locating device. They also allow the manifold to expand and contract during heating and cooling. The hot runner nozzles are each centered in their locator bores in mold plate by means of three contact surfaces in such a way that they do not experience the expansion and contraction undergone by the manifold. The contact surfaces facing the manifold are convex. Transfer areas for the molding compound are sealed with steel O-rings. The ends of the hot runner nozzles on the mold side have conical bores. In this region. Their exteriors fit snugly into the mold platen to ensure good thermal conduction and thus rapid cooling of the sprue formed therein.

On mold opening, the frozen sprue separates from the hot melt in the manifold at the narrowest point of the conical bore. The nozzles are heated with heating collars. Two temperature probes are attached to each nozzle to monitor and regulate the temperature. The cartridge heaters in the manifold are arranged in seven groups, each of which is individually regulated. The cartridges have an installed rating of about 40 KW.
The melt pressure in the manifold is registered by pressure sennsor P. and that in the cavity, by sensor P. and cann therefore be used for control purposes. The temperature-control system consists of a network of bores in the two mold hales. Heat sensors T measure the temperature in the mold.
Ejection of the Auto door plastic part
When the mold opens, the molded part remains in the moving half. The sprues are also held in place by sprue pullers above the ejector pins. As soon as the stripper plates are pushed forward by the ejector of the machine, the ejector pins push the molded part along with the sprues from the mold core. On mold closing, the ejector plates and thus also the ejector pins are pushed back by ejector-plate return pins. The mold plate is supported by rolls projecting right through the ejector plates to the clamping plate.



Company Features
1. Equipped products made by injection moulding assists the bulk production of car body molding to guarantee the on-time delivery service.
2. We have business nearly all over the globe. Many of our products have been sold to Japan, the United States, UK, Germany, and other countries.
3. With plastic pellets for injection molding being its service theory, Euromicron Mould Engineering Limited provides plastic part design for injection molding . Call! Euromicron Mould effectively strengthens the social responsibility and firmly establishes the service awareness. Call! Euromicron Mould has been devoted to helping customers to enjoy car moulding use experience. Call!
Euromicron Mould plastic part design for injection molding has a secured source of raw materials. Hicool's opticlimate packaged unit controls light, temperature and humidity for plant growth
plastic part design for injection molding design determines the final form of car moulding from Euromicron Mould Engineering Limited. Hicool's opticlimate packaged unit has been widely applied in greenhouse, offices and yachts
Euromicron Mould products made by injection moulding is designed in accorance with the basic production standard. Hicool's opticlimate packaged unit achieves a one-stop air control effectively
Euromicron Mould plastic part design for injection molding is designed by the concerted effort of strong R&D team and design team. Quiet water-cooled air conditioning is provided by Hicool's opticlimate packaged unit
In order to be the leading plastic part design for injection molding manufacturers, our experts also focuses on its design. Opticlimate split unit achieves a uniform distribution and constant value of CO2 without losing CO2
With the assistance of car body molding, products made by injection moulding has gained its popularity in the market. Through energy-adjusting device, opticlimate packaged unit can provide hot water while refrigerating
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...