Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould OEM ODM automobile suchen renovation solutions for businessman
Euromicron Mould OEM ODM automobile suchen renovation solutions for businessman

Euromicron Mould OEM ODM automobile suchen renovation solutions for businessman
  • Euromicron Mould OEM ODM automobile suchen renovation solutions for businessman
  • Euromicron Mould OEM ODM automobile suchen renovation solutions for businessman

Euromicron Mould OEM ODM automobile suchen renovation solutions for businessman

Many colors of automobile suchen are available for customer's selection. The product is easy to assemble and maintain
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Many colors of automobile suchen are available for customer's selection. The product is easy to assemble and maintain
2. Euromicron Mould specializes in locating exquisite automobile suchen and professional services. The complete after-sales service system is rendered for the product to maximize customer value
3. The product is resistant to fading. Its materials have been tested under normal washing, dry cleaning, perspiration, and chlorinated water to check colorfastness. Supported by the world-class manufacturing management system, it is of stable quality


This trail mold was used to injection Auto door plastic part in different thermoplastics, such as  PC/ABS blend and modified PA, elastomer-modified PC, PC/PBTP blend and modified PBTTB for a number of manufacturing companies.
The two-cavities mold for Auto door plastic part consists essentially of sprue half with the hot runner system and the ejector mold half. Pillars and bushings serve to guide the two mold halves. When the mold is closed. The mold halves are fixed relative to each other via angled surfaces and wear plates.
Gating and temperature control. The molding compound passes through a sprue bushing into the hot runner made of steel (material number 1.2311). From four heated nozzles, also of steel (material number 1.2162), it passes through cold feed channels to the various gates of the mold cavity. The gates measure 15 mm X 1.2 mm.

Euromicron Mould OEM ODM automobile suchen renovation solutions for businessman-1

The hot runner manifold block is heated by cartridge heaters which are pressed against it by laterally bolted cover strips. The distributor lies in a recess of the feed-side mold plate and is pressed by the hot runner covering plate against the nozzles via spacer rings. Guide components prevent the manifold from twisting about the locating device. They also allow the manifold to expand and contract during heating and cooling. The hot runner nozzles are each centered in their locator bores in mold plate by means of three contact surfaces in such a way that they do not experience the expansion and contraction undergone by the manifold. The contact surfaces facing the manifold are convex. Transfer areas for the molding compound are sealed with steel O-rings. The ends of the hot runner nozzles on the mold side have conical bores. In this region. Their exteriors fit snugly into the mold platen to ensure good thermal conduction and thus rapid cooling of the sprue formed therein.

On mold opening, the frozen sprue separates from the hot melt in the manifold at the narrowest point of the conical bore. The nozzles are heated with heating collars. Two temperature probes are attached to each nozzle to monitor and regulate the temperature. The cartridge heaters in the manifold are arranged in seven groups, each of which is individually regulated. The cartridges have an installed rating of about 40 KW.
The melt pressure in the manifold is registered by pressure sennsor P. and that in the cavity, by sensor P. and cann therefore be used for control purposes. The temperature-control system consists of a network of bores in the two mold hales. Heat sensors T measure the temperature in the mold.
Ejection of the Auto door plastic part
When the mold opens, the molded part remains in the moving half. The sprues are also held in place by sprue pullers above the ejector pins. As soon as the stripper plates are pushed forward by the ejector of the machine, the ejector pins push the molded part along with the sprues from the mold core. On mold closing, the ejector plates and thus also the ejector pins are pushed back by ejector-plate return pins. The mold plate is supported by rolls projecting right through the ejector plates to the clamping plate.



Company Features
1. Euromicron Mould Engineering Limited is one of the largest enterprise for manufacturing and exporting automobile suchen .
2. Our extensive partner and customer networks both at home and abroad help us better seize opportunities and achieve better business outcomes. We will continue to maintain friendly relationships with those clients and further explore more cooperative partners.
3. Euromicron Mould has successfully utilized the power of diversity and inclusiveness. Inquire online!
Euromicron Mould automobile suchen is designed with a scientific system. This system includes a sterilization system to reliably supply the desired water quality. Foshan Jiabang Garden Supplies Co., Ltd set up in 2004
The purifying system of Euromicron Mould plastic injection molding products has been built using standardized 'building block' methods, allowing for quick delivery and installation. It's a leading company in the industry of decking tiles in China
Euromicron Mould plastic injection molding products has to go through a comprehensive QC check including the performance of filter and membrane, PLC controller, and valves. Situated in Foshan city of China, our factory covers an area of 2,000 square meters
The production of Euromicron Mould plastic injection molding products is constantly monitored. For example, its production is conducted in a microbiologically controlled environment. There are over 13 series and 200 items available for our decking tiles
Euromicron Mould automobile suchen has been evaluated regarding the safety construction such as instrumentation and control, electrical and mechanical equipment, mechanical and structural piping, supports and hangers, etc. We've been focusing on manufacturing high quality decking tiles for domestic and abroad customers
It is in high accordance with the quality inspection standards. There are over 13 series and 200 items available for our decking tiles
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...