Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould OEM ODM auto parts mould renovation solutions for trader
Euromicron Mould OEM ODM auto parts mould renovation solutions for trader

Euromicron Mould OEM ODM auto parts mould renovation solutions for trader
  • Euromicron Mould OEM ODM auto parts mould renovation solutions for trader
  • Euromicron Mould OEM ODM auto parts mould renovation solutions for trader
  • Euromicron Mould OEM ODM auto parts mould renovation solutions for trader
  • Euromicron Mould OEM ODM auto parts mould renovation solutions for trader
  • Euromicron Mould OEM ODM auto parts mould renovation solutions for trader
  • Euromicron Mould OEM ODM auto parts mould renovation solutions for trader
  • Euromicron Mould OEM ODM auto parts mould renovation solutions for trader

Euromicron Mould OEM ODM auto parts mould renovation solutions for trader

Euromicron Mould Engineering Limited's design for auto parts mould has always been following the concept - striving for first-rate. The product has an output of 50 sets per month
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Euromicron Mould Engineering Limited's design for auto parts mould has always been following the concept - striving for first-rate. The product has an output of 50 sets per month
2. This product is very user-friendly, easily installed, and comes with a complete detailed operation guide including user instructions, maintenance, and installation procedures. Its quality has been certified under ISO14001:2004 and CE
3. With technology innovation, such features as plastic injection mold making make auto parts mould warm welcomed by costumers. Made of well-selected materials, the product has a long service life
4. plastic injection mold making has been become a developing trend of auto parts mould market. The product can be applied in many industries, such as the automobile, house appliance, and medical industry


Euromicron Mould OEM ODM auto parts mould renovation solutions for trader-1
Euromicron Mould OEM ODM auto parts mould renovation solutions for trader-2



◇◆ Product Features


Euromicron Mould OEM ODM auto parts mould renovation solutions for trader-3

The product is applied in the automobile Mercedes Benz. It is a part of the tank. It works in the high temperature environment. So it is made of the material PA66 with 30% glass fiber. This is a special heat-resistant material. Also it is a high strength engineering material. This composite materials have superiorities in size stability, formability, stretching resistance and impact resistance. This a long product. The length is 495mm. width is 76mm, height is 83mm. it is easy to deflect after injecting. So it is very important to solve deflect issue in the mold.


Euromicron Mould OEM ODM auto parts mould renovation solutions for trader-4

The mold is a two-cavities design with hot runner system. The valve gate of the hot runner system is directly on the part. We did mold flow analysis before mold design. Through technical analysis, we can estimate the deformation of the part and find some problems of injection molding. So that we saved some steel for late adjustment about deformation.Meanwhile, we did Some preventive measures for possible problems.

Euromicron Mould OEM ODM auto parts mould renovation solutions for trader-5

In this way, we can optimized the mold after trailing shoot until the molding was good. The structure of the part was a lot complex. There were some bosses and hooks at the side of the product. It needed several sliders to formed them. For cooling system, it was very important too. Good cooling system can decrease the deformation of the product and the cycle time. So we designed several sufficient cooling loops for this mold. Not only cooling loops were design in the core insert and cavity insert, but also cooling loops were designed in the sliders and the mold plate.

Euromicron Mould OEM ODM auto parts mould renovation solutions for trader-6

In that case, the temperature of the mold can be controlled well. And the product was very stable. The cycle time was about 41 seconds. By controlling the valves of the hot runner system, we can control the volume of each part and the balance of flowing. Because of the plastic material including 30%glass fiber, the steel of forming insert must be harden steel. We choose to use imported steel 1.2344 which hardness was about 52 HRC. The mold ran well. The mold run over 3 hours for testing before delivery to customer. Customer was satisfied the mold.



Company Features
1. Euromicron Mould Engineering Limited is currently the leading enterprise in Chinese auto parts mould field.
2. Euromicron Mould Engineering Limited has a strong independent R&D capabilities with advanced domestic production technology.
3. We gear towards more sustainable business and environment development. We make efforts in introducing effectual sewage disposal and exhaust emission clean systems to minimize the adverse impact on our environment.
The quality control department must carry out rigorous testing on Euromicron Mould auto parts mould. These tests typically involve leakage detection, short circuit detection, and electrical load capability testing. The fabrics of this product can be customized according to needs
During the development stage of Euromicron Mould auto parts mould, different factors have been taken into consideration. They are mainly structure stability, statics, mechanical properties, the whole efficiency, etc. This product is not easy to shrink
The production of Euromicron Mould plastic injection mold making is eco-friendly and does not generate any water, air or noise pollution. And the cleaning process guarantees it is meticulously cleaned and free of dust and odor. The reinforced stitching makes this product less likely to burst
The creation of Euromicron Mould plastic injection mold making is in line with international electrical safety standards. It meets the requirements of IEC, EMC, CE marking, etc. It acts as an expression of women's tastes
The following tests must be performed in Euromicron Mould auto parts mould production. These tests involve dielectric withstand inspection, insulation resistance inspection, leakage current inspection, and the like. This product is available in a variety of colors
This product is safe to use. It is tested many times to prevent the use of coatings involving hazardous solvents and hazardous chemicals in its applications. This product can stand up to repeated washing
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...