Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould OEM ODM auto parts mould one-stop service supplier for businessman
Euromicron Mould OEM ODM auto parts mould one-stop service supplier for businessman

Euromicron Mould OEM ODM auto parts mould one-stop service supplier for businessman
  • Euromicron Mould OEM ODM auto parts mould one-stop service supplier for businessman
  • Euromicron Mould OEM ODM auto parts mould one-stop service supplier for businessman
  • Euromicron Mould OEM ODM auto parts mould one-stop service supplier for businessman

Euromicron Mould OEM ODM auto parts mould one-stop service supplier for businessman

A broad range of quality and workmanship inspections for Euromicron Mould injection molding manufacturing companies is required. They mainly check drop stitches, dye marks, bad selvedge, shade variation, lines layout, and so forth.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Enterprise Strength
  • Our excellence comes from the efforts of staff from such departments as R&D department, sales department, design department and production department. There are designers, R&D experts, and after-sales personnel in our company.
  • Euromicron is equipped with professional sales and customer service staff. They are able to provide services such as consulting, customization and product selection.
  • Euromicron always sticks to our tenet of "quality comes first" by focusing on the quality control, service improvement, and fast response.
  • We have been dedicated to the manufacturing of cnc service for about years, and have become the leading enterprise in the industry. This enables us to introduce and operate a complete set of production equipment, and achieve intelligentization and standardization.
  • Since the establishment, our sales network has been continuously expanding to where our sales service is highly appraised by customers at home and abroad. In future, we would like to establish our marketing network overseas and expand the business further.
Company Advantages
1. A broad range of quality and workmanship inspections for Euromicron Mould injection molding manufacturing companies is required. They mainly check drop stitches, dye marks, bad selvedge, shade variation, lines layout, and so forth.
2. The quality of this product is improved under international standards.
3. All defects are removed from the products during the quality inspection process.
4. For those who easily get tired or have foot pain after long-hour walking and standing, this product is beneficial to them.
5. It is a fact that people enjoy the moment better in their lives since this production is comfortable, safe, and attractive.


Euromicron Mould OEM ODM auto parts mould one-stop service supplier for businessman-1
Euromicron Mould OEM ODM auto parts mould one-stop service supplier for businessman-2



◇◆ Product Features


Euromicron Mould OEM ODM auto parts mould one-stop service supplier for businessman-3

According to customer's requirement, the mold was designed into 4 cavities mold. It was cooled by cold water. The part was foldable box. The concave shape of the cover was designed in the cavity side of the mold. In that case, the cover was easy to stick in the cavity side when opening the mold. The part should be damaged and deformed.


Euromicron Mould OEM ODM auto parts mould one-stop service supplier for businessman-4

To solve the problem, we designed a ejecting system in the cavity side of the mold. The ejecting system was actuated by two hydraulic cylinder. In this way, the cavity side was too thick. And the sprue was very long. It was bad for injecting. The cycle time of production increased. And more plastic material was wasted. The cost was increased a lot. So we suggest customer to add a hot runner system in the mold.

Euromicron Mould OEM ODM auto parts mould one-stop service supplier for businessman-5

The tip gate of the hot nozzle was directly on the part. So no plastic material was wasted on the cold runner and the cycle time was short. It was about 38 seconds. The link connected cover and frame, which's thickness was very critic. If it too thick, it was hard and very difficult to fold it. If it was too thin, it was difficult to fill full when injecting. And it was easy to break during in use. Also its lifetime was short. It can't meet the requirement of the part.

Euromicron Mould OEM ODM auto parts mould one-stop service supplier for businessman-6

To reach it, we adjusted the dimension of the link and did trail three times. Through continuous optimization, it worked very well finally. The mold was delivered to customer on time. The customer was very satisfied with the quality of the mold.



Company Features
1. Euromicron Mould Engineering Limited is one of the most dynamic companies in the rich and complex world of injection molding manufacturing companies manufacturing.
2. Our auto parts mould production equipment possesses many innovative features created and designed by us.
3. To create a relatively unified auto parts company company is our purpose. Contact! 'Assist Partners, Service Partners' is the value chain management principle that Euromicron Mould Engineering Limited has always followed. Contact!
Euromicron Mould injection molding manufacturing companies has a secured source of raw materials. Opticlimate two-stage evaporation system is certified to meet international standards
injection molding manufacturing companies design determines the final form of auto parts company from Euromicron Mould Engineering Limited. Quiet water-cooled air conditioning is provided by Hicool's opticlimate packaged unit
Euromicron Mould auto parts company is designed in accorance with the basic production standard. No harmful refrigerant is used in the opticlimate two-stage evaporation system
Euromicron Mould auto parts company is designed by the concerted effort of strong R&D team and design team. Hicool's opticlimate split unit is friendly to users as it is easy to operate
In order to be the leading auto parts company manufacturers, our experts also focuses on its design. Hicool's opticlimate packaged unit is exported to East Europe, the Middle East and South Africa
With the assistance of auto parts company, injection molding manufacturing companies has gained its popularity in the market. Opticlimate split unit has higher heat transfer efficiency than conventional heat exchangers
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...