Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould OEM ODM auto parts company source now for trader
Euromicron Mould OEM ODM auto parts company source now for trader

Euromicron Mould OEM ODM auto parts company source now for trader
  • Euromicron Mould OEM ODM auto parts company source now for trader
  • Euromicron Mould OEM ODM auto parts company source now for trader

Euromicron Mould OEM ODM auto parts company source now for trader

Euromicron Mould automotive door molding is designed in accordance with the industrial conditions as well as precise demands of the customers.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
Euromicron's injection mold is manufactured in strict accordance with relevant national standards. Every detail matters in the production. Strict cost control promotes the production of high-quality and priced-low product. Such a product is up to customers' needs for a highly cost-effective product.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Euromicron's injection mold has been further improved based on advanced technology, as reflected in the following aspects.
Company Advantages
1. Euromicron Mould automotive door molding is designed in accordance with the industrial conditions as well as precise demands of the customers.
2. The product generates an only little amount of electromagnetic radiation. It has been tested to prove that it has a very low electromagnetic wave which has limited influence.
3. The product is characterized by its excellent sealing effect. It tightly seals up the mating face, cutting off any leakage passages to exclude any medium.
4. After-sale service will be provided to help our customers during using auto parts company .


This trail mold was used to injection Auto door plastic part in different thermoplastics, such as  PC/ABS blend and modified PA, elastomer-modified PC, PC/PBTP blend and modified PBTTB for a number of manufacturing companies.
The two-cavities mold for Auto door plastic part consists essentially of sprue half with the hot runner system and the ejector mold half. Pillars and bushings serve to guide the two mold halves. When the mold is closed. The mold halves are fixed relative to each other via angled surfaces and wear plates.
Gating and temperature control. The molding compound passes through a sprue bushing into the hot runner made of steel (material number 1.2311). From four heated nozzles, also of steel (material number 1.2162), it passes through cold feed channels to the various gates of the mold cavity. The gates measure 15 mm X 1.2 mm.

Euromicron Mould OEM ODM auto parts company source now for trader-1

The hot runner manifold block is heated by cartridge heaters which are pressed against it by laterally bolted cover strips. The distributor lies in a recess of the feed-side mold plate and is pressed by the hot runner covering plate against the nozzles via spacer rings. Guide components prevent the manifold from twisting about the locating device. They also allow the manifold to expand and contract during heating and cooling. The hot runner nozzles are each centered in their locator bores in mold plate by means of three contact surfaces in such a way that they do not experience the expansion and contraction undergone by the manifold. The contact surfaces facing the manifold are convex. Transfer areas for the molding compound are sealed with steel O-rings. The ends of the hot runner nozzles on the mold side have conical bores. In this region. Their exteriors fit snugly into the mold platen to ensure good thermal conduction and thus rapid cooling of the sprue formed therein.

On mold opening, the frozen sprue separates from the hot melt in the manifold at the narrowest point of the conical bore. The nozzles are heated with heating collars. Two temperature probes are attached to each nozzle to monitor and regulate the temperature. The cartridge heaters in the manifold are arranged in seven groups, each of which is individually regulated. The cartridges have an installed rating of about 40 KW.
The melt pressure in the manifold is registered by pressure sennsor P. and that in the cavity, by sensor P. and cann therefore be used for control purposes. The temperature-control system consists of a network of bores in the two mold hales. Heat sensors T measure the temperature in the mold.
Ejection of the Auto door plastic part
When the mold opens, the molded part remains in the moving half. The sprues are also held in place by sprue pullers above the ejector pins. As soon as the stripper plates are pushed forward by the ejector of the machine, the ejector pins push the molded part along with the sprues from the mold core. On mold closing, the ejector plates and thus also the ejector pins are pushed back by ejector-plate return pins. The mold plate is supported by rolls projecting right through the ejector plates to the clamping plate.



Company Features
1. There is a strong strength of Euromicron Mould Engineering Limited in the international auto parts company market.
2. Our company is supported by the professional QC team. They have a good understanding of quality standards and strictly comply with them to conduct testing work.
3. Lifetime warranty & Technical support in a lifetime are promised for our car moldings . Inquire now! That our company is a leading car door molding manufacturer contributes to automotive door molding and plastic injection mold making . Inquire now! Euromicron Mould upholds the concept of the integration of custom injection molding companies and automobile parts manufacturing together. Inquire now!
Our auto parts company have various styles and rich colors, following international changing market trend. 100% pure natural fragrance oil of Jebsenarts' gel air freshener is guaranteed
Lots of time and money are spent upfront perfecting Euromicron Mould car door molding. Deodorant, made of imported materials from America, can help sterilize the air
Euromicron Mould automotive door molding is manufactured using state-of-the-art machinery and the best quality materials.
Euromicron Mould plastic injection mold making is produced by modern assembly line. Jebsenarts' essential oil car air freshener has multiple colors and 4 kinds of fragrance options
When manufacturing plastic injection mold making, we also take car moldings into consideration. High-end natural materials ensure air fresheners to be non-toxic and healthy to people
The product has perfectly shiny & smooth finishes. For optimum surface finishes, the gel coat would be applied to the mold surface prior to molding. The materials for making air fresheners are imported from Swiss, Germany, France and England
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...