Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould OEM ODM auto molding renovation solutions for merchant
Euromicron Mould OEM ODM auto molding renovation solutions for merchant

Euromicron Mould OEM ODM auto molding renovation solutions for merchant
  • Euromicron Mould OEM ODM auto molding renovation solutions for merchant
  • Euromicron Mould OEM ODM auto molding renovation solutions for merchant

Euromicron Mould OEM ODM auto molding renovation solutions for merchant

Euromicron Mould Engineering Limited is an outstanding company specializing in the production of automotive plastic parts manufacturers . We are known for our expertise in manufacturing. So far, we take pride in that we have covered our sales network around the world. We have enhanced and optimized our marketing channels to more efficiently provide more products to our customers.
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. The semiconductor materials inspection of Euromicron Mould automotive plastic parts manufacturers is carried out adopting the highest LED lighting standards, ensuring that this LED lighting has high luminous efficiency. The surface of the product adopts scratch-resistant coating
2. With our continual efforts in product R&D, the product is sure to have a greater market application in the future. The product is easy to assemble and maintain
3. Comparing with common auto molding , automotive plastic parts manufacturers has more features. The complete after-sales service system is rendered for the product to maximize customer value


This trail mold was used to injection Auto door plastic part in different thermoplastics, such as  PC/ABS blend and modified PA, elastomer-modified PC, PC/PBTP blend and modified PBTTB for a number of manufacturing companies.
The two-cavities mold for Auto door plastic part consists essentially of sprue half with the hot runner system and the ejector mold half. Pillars and bushings serve to guide the two mold halves. When the mold is closed. The mold halves are fixed relative to each other via angled surfaces and wear plates.
Gating and temperature control. The molding compound passes through a sprue bushing into the hot runner made of steel (material number 1.2311). From four heated nozzles, also of steel (material number 1.2162), it passes through cold feed channels to the various gates of the mold cavity. The gates measure 15 mm X 1.2 mm.

Euromicron Mould OEM ODM auto molding renovation solutions for merchant-1

The hot runner manifold block is heated by cartridge heaters which are pressed against it by laterally bolted cover strips. The distributor lies in a recess of the feed-side mold plate and is pressed by the hot runner covering plate against the nozzles via spacer rings. Guide components prevent the manifold from twisting about the locating device. They also allow the manifold to expand and contract during heating and cooling. The hot runner nozzles are each centered in their locator bores in mold plate by means of three contact surfaces in such a way that they do not experience the expansion and contraction undergone by the manifold. The contact surfaces facing the manifold are convex. Transfer areas for the molding compound are sealed with steel O-rings. The ends of the hot runner nozzles on the mold side have conical bores. In this region. Their exteriors fit snugly into the mold platen to ensure good thermal conduction and thus rapid cooling of the sprue formed therein.

On mold opening, the frozen sprue separates from the hot melt in the manifold at the narrowest point of the conical bore. The nozzles are heated with heating collars. Two temperature probes are attached to each nozzle to monitor and regulate the temperature. The cartridge heaters in the manifold are arranged in seven groups, each of which is individually regulated. The cartridges have an installed rating of about 40 KW.
The melt pressure in the manifold is registered by pressure sennsor P. and that in the cavity, by sensor P. and cann therefore be used for control purposes. The temperature-control system consists of a network of bores in the two mold hales. Heat sensors T measure the temperature in the mold.
Ejection of the Auto door plastic part
When the mold opens, the molded part remains in the moving half. The sprues are also held in place by sprue pullers above the ejector pins. As soon as the stripper plates are pushed forward by the ejector of the machine, the ejector pins push the molded part along with the sprues from the mold core. On mold closing, the ejector plates and thus also the ejector pins are pushed back by ejector-plate return pins. The mold plate is supported by rolls projecting right through the ejector plates to the clamping plate.



Company Features
1. Euromicron Mould Engineering Limited is an outstanding company specializing in the production of automotive plastic parts manufacturers . We are known for our expertise in manufacturing. So far, we take pride in that we have covered our sales network around the world. We have enhanced and optimized our marketing channels to more efficiently provide more products to our customers.
2. Our factory has state-of-the-art machinery and equipment. They are well-maintained and cared for, supporting prototype, and both low & high volume production quantities.
3. Our factory has state-of-the-art machines and equipment. They help the company reduce production costs and increasing production efficiency and output. We desire to be a pioneer in the industry of auto molding . Contact us!
The variety of automotive plastic parts manufacturers design sells well all over the world.
With the efforts of our fine workmanship, Euromicron Mould has gained much popularity since founded.
auto molding we produced is characterized by its its high quality and durability.
The characteristics of automotive plastic parts manufacturers including reasonable configuration, reliable capability and auto molding.
Deft design,compact structure and small in size.
The product has been inspected to strict quality standards.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...