loading

Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould OEM ODM auto body molding one-stop service supplier for trader
Euromicron Mould OEM ODM auto body molding one-stop service supplier for trader

Euromicron Mould OEM ODM auto body molding one-stop service supplier for trader
  • Euromicron Mould OEM ODM auto body molding one-stop service supplier for trader
  • Euromicron Mould OEM ODM auto body molding one-stop service supplier for trader
  • Euromicron Mould OEM ODM auto body molding one-stop service supplier for trader
  • Euromicron Mould OEM ODM auto body molding one-stop service supplier for trader

Euromicron Mould OEM ODM auto body molding one-stop service supplier for trader

This is...
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
Euromicron has great production capability and excellent technology. We also have comprehensive production and quality inspection equipment. cnc service has fine workmanship, high quality, reasonable price, good appearance, and great practicality.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Compared with other products in the same category, cnc service has more advantages, specifically in the following aspects.
Company Advantages
1. The raw material of Euromicron Mould injection mold components goes through a rigorous selection procedure.
2. The product is put into the market after rigorous inspection.
3. All the cabinets body or parts can be easily assembled and installed by people themselves or by a professional installer.


This is a door handle of automobile. The product needs electroplating. The finish is high gloss. The material is PC+ABS with electroplating grade.

Euromicron Mould OEM ODM auto body molding one-stop service supplier for trader-1
Euromicron Mould OEM ODM auto body molding one-stop service supplier for trader-2


◇◆ Product Features


The mold was built in 2005. It is two-cavity mold. Cold runner system. The part was ejected out by round ejector pin and sleeve ejector. The finish of the cavity is very important. The steel  NAK80 is used in the mold. The polishing grade is A3 (Ra0.032μm). It has high requirements not only for polishing itself but also for surface smoothness, smoothness and geometric accuracy. In order to obtain high-quality polishing effect, the most important thing is to have high-quality polishing tools and accessories such as whetstone, sandpaper and diamond grinding paste. And the choice of polishing process depends on the surface condition after the early processing, such as mechanical processing, edm, grinding and so on.

Euromicron Mould OEM ODM auto body molding one-stop service supplier for trader-3

Rough polished is the first step in polishing. After milling, edm, grinding and other processes of the surface can be selected in the speed of 35,000 to 40000rpm rotary surface polishing machine or ultrasonic grinding machine for polishing. Commonly used methods include using Φ3 mm in diameter, WA# 400 wheels to remove white edm layer. Then it is grinded by hand, and the strip is added with kerosene as lubricant or coolant. The general order of use is #180~#240~#320~#400~#600~#800~#1000. Semi-polishing is second step. It mainly use sandpaper. The Numbers of sandpaper are: #400~#600~#800~#1000~#1200~#1500. Fine polishing is the final step. Fine polishing mainly USES diamond abrasive paste. The usual grinding order to get diamonds to mix together with polishing wheels is to get 9 microns (#1800) to 6 microns (#3000) to 3 microns (#8000).

Diamond abrasive paste and polishing wheels can be used to remove the hair marks on #1200 and #1500 sandpaper. The carpeting and diamond paste are then polished to the tune of 1 microns to 1/2 microns to 1 microns to 1 quarter microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns to 1 microns. The polishing process to be over 1 microns (including 1 microns) to the accuracy requirements can be carried out in a clean polishing room at the die processing workshop. For more sophisticated polishing an absolutely clean space is required. Dust, smoke, dandruff and saliva can all be discarded after hours of work to obtain a highly precise polished surface.



Company Features
1. Euromicron Mould Engineering Limited is expanding its factory scale to get higher capacity for auto body molding .
2. Euromicron Mould Engineering Limited has introduced sizable set of auto parts company manufacturing machines.
3. Euromicron Mould strives to be the most competitive supplier. Check it! Euromicron Mould Engineering Limited is confident that your needs will be greatly satisfied. Check it!
The production of auto parts company always takes injection mold components into account. It is excellent in permeability resistance and enjoys good flexibility
Our auto parts company are constantly updated to follow the trend. It has the ability to resist acid, alkali and other media
injection mold components produced by Euromicron Mould Engineering Limited are mainly characterized by their auto body molding. With the feature of excellent tear resistance, it has a prolonged service life
The material of injection mold components allows auto body molding to make itself auto body molding. It is widely exported to the Middle East, North Africa, America, etc
The special composition of auto body molding makes it obtain good performance of injection mold components. Because of the high-quality glass melting process and molding process, it enjoys high strength
Our auto parts company not only has excellent quality, but also has an affordable price, and the overall cost performance is relatively high.
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...