Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould nylon plastic injection molding products source now for businessman
Euromicron Mould nylon plastic injection molding products source now for businessman

Euromicron Mould nylon plastic injection molding products source now for businessman
  • Euromicron Mould nylon plastic injection molding products source now for businessman
  • Euromicron Mould nylon plastic injection molding products source now for businessman
  • Euromicron Mould nylon plastic injection molding products source now for businessman
  • Euromicron Mould nylon plastic injection molding products source now for businessman
  • Euromicron Mould nylon plastic injection molding products source now for businessman
  • Euromicron Mould nylon plastic injection molding products source now for businessman
  • Euromicron Mould nylon plastic injection molding products source now for businessman

Euromicron Mould nylon plastic injection molding products source now for businessman

Euromicron Mould plastic injection molding products has gone through a series of complete production processes which include CAD software design, frame construction, and treatment of panel appearance. Our water parks designed for foreign customers are all unique and very successful
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


Euromicron Mould nylon plastic injection molding products source now for businessman-1
Euromicron Mould nylon plastic injection molding products source now for businessman-2



◇◆ Product Features


Euromicron Mould nylon plastic injection molding products source now for businessman-3

The product is applied in the automobile Mercedes Benz. It is a part of the tank. It works in the high temperature environment. So it is made of the material PA66 with 30% glass fiber. This is a special heat-resistant material. Also it is a high strength engineering material. This composite materials have superiorities in size stability, formability, stretching resistance and impact resistance. This a long product. The length is 495mm. width is 76mm, height is 83mm. it is easy to deflect after injecting. So it is very important to solve deflect issue in the mold.


Euromicron Mould nylon plastic injection molding products source now for businessman-4

The mold is a two-cavities design with hot runner system. The valve gate of the hot runner system is directly on the part. We did mold flow analysis before mold design. Through technical analysis, we can estimate the deformation of the part and find some problems of injection molding. So that we saved some steel for late adjustment about deformation.Meanwhile, we did Some preventive measures for possible problems.

Euromicron Mould nylon plastic injection molding products source now for businessman-5

In this way, we can optimized the mold after trailing shoot until the molding was good. The structure of the part was a lot complex. There were some bosses and hooks at the side of the product. It needed several sliders to formed them. For cooling system, it was very important too. Good cooling system can decrease the deformation of the product and the cycle time. So we designed several sufficient cooling loops for this mold. Not only cooling loops were design in the core insert and cavity insert, but also cooling loops were designed in the sliders and the mold plate.

Euromicron Mould nylon plastic injection molding products source now for businessman-6

In that case, the temperature of the mold can be controlled well. And the product was very stable. The cycle time was about 41 seconds. By controlling the valves of the hot runner system, we can control the volume of each part and the balance of flowing. Because of the plastic material including 30%glass fiber, the steel of forming insert must be harden steel. We choose to use imported steel 1.2344 which hardness was about 52 HRC. The mold ran well. The mold run over 3 hours for testing before delivery to customer. Customer was satisfied the mold.



The development of Euromicron Mould plastic injection molding products adopts different advanced technologies. It is developed under the enlightenment of energy keeping and ultra-quiet technologies. Our Inflatable Water Park has similar quality as famous brand but only 1/3 price
Euromicron Mould plastic injection molding products is generally tested under a simulated environment. These tests may include fatigue testing for electronic components and thermal insulation performance testing for materials. Bouncia use customized anti UV&heat material makes the life span of the floating water park 30%-50% longer than normal material
The electric performance test of Euromicron Mould plastic injection molding products is conducted at the quality inspection stage. The main electrical performance index such as capacity, internal resistance, lifespan, and short circuit protection will be tested by the QC team. We make reinforcements at every weak points like welding seams, inside baffles, corners etc
The design of Euromicron Mould plastic injection molding products is professional. It involves circuit design (usually via computer drafting software), printed circuit design, and housing design. We make reinforcements at every weak points like welding seams, inside baffles, corners etc
Euromicron Mould plastic injection molding products has been tested. It has achieved a BS 5234-2: 1992 severe duty rating which is conducted by an accredited laboratory. Our Inflatable Water Park is especially suitable for the strong UV and high temperature area
The product is resistant to flaking. After withstanding a certain sharp temperature change or collision, it will not easily fail. Our Inflatable Water Park has similar quality as famous brand but only 1/3 price
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...