Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould new plastic parts bulk purchase for home application
Euromicron Mould new plastic parts bulk purchase for home application

Euromicron Mould new plastic parts bulk purchase for home application
  • Euromicron Mould new plastic parts bulk purchase for home application

Euromicron Mould new plastic parts bulk purchase for home application

Since establishment, Euromicron Mould Engineering Limited has been an active role in the design and production of plastic mold factory . We are widely accepted in the industry.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Enterprise Strength
  • Our excellence comes from the efforts of staff from such departments as R&D department, sales department, design department and production department. There are designers, R&D experts, and after-sales personnel in our company.
  • In order to protect the rights and interests of consumers, Euromicron gathers a number of professional customer service staff to solve various problems. It is our commitment to provide quality services.
  • Euromicron always sticks to our tenet of "quality comes first" by focusing on the quality control, service improvement, and fast response.
  • We have been dedicated to the manufacturing of cnc service for about years, and have become the leading enterprise in the industry. This enables us to introduce and operate a complete set of production equipment, and achieve intelligentization and standardization.
  • Since the establishment, our sales network has been continuously expanding to where our sales service is highly appraised by customers at home and abroad. In future, we would like to establish our marketing network overseas and expand the business further.
Company Advantages
1. Euromicron Mould plastic parts has been assessed in terms of electrical safety. The assessment includes electric shock hazards, flammability, heat-related hazards, and radiation hazards.
2. It has a smooth corrosion resistant finish. If chemical substances or liquid is splashed on it by accident, no surface corrosion will occur.
3. Euromicron Mould Engineering Limited's commitment is to provide new plastic parts technologies to customers.


Molding process parameters and process analysis of TV shell material


Molding process parameters

-- The molding process parameters of plastic parts mainly include temperature, pressure and time.
-- Temperature injection molding process needs to control the temperature of the barrel temperature, nozzle temperature and mold temperature.
(1) the selection of the temperature of the barrel should ensure that the plastics are well plasticized and can be injected without any trouble It causes the plastic to break down.
(2) the selection of nozzle temperature material barrel and nozzle temperature shall be compatible with other process conditions. Barrel and nozzle
The effect of temperature on the forming condition and the physical and mechanical properties of the plastic parts is very significant.
(3) the mold temperature has a great influence on the internal performance and performance quality of the plastic parts.
Mold temperature according to whether plastic parts crystallization, plastic parts size and structure requirements.

Euromicron Mould new plastic parts bulk purchase for home application-1
Pressure in injection molding process includes plasticizing pressure and injection pressure, both of which directly affect the plasticizing of plastics and the quality of plastic parts.

(1) the plasticizing pressure in the injection process varies with the design of plastic rods, the quality requirements of plastic parts and the types of plastic parts.
(2) the injection pressure depends on the type of injection molding machine, mold structure, wall thickness of plastic parts, type of plastic parts and injection molding process.

The time of a single injection molding cycle includes injection time (mold filling time and pressure maintaining time), mold closing cooling time and other time (mold opening, mold release, mold coating, insert placement, mold closing time, etc.).

(1) the filling time in production is 3-5s.
The pressure holding time of injection time is large, usually about 20 ~ 120s.
Before the weld solidification at the gate, the length of the holding time has a direct impact on the size accuracy of the plastic parts, while that at the gate has no effect after condensation.
The holding time shall be subject to the time with the smallest contraction fluctuation range of the plastic part.
(2) the cooling time depends on the thickness of the plastic parts, their thermal and crystalline properties, and the mold temperature.
The cooling time is about 30 ~ 120s.
Too long cooling time will make it difficult to unform complex plastic parts.
Injection molding process control factors: temperature, pressure and time, all need to be based on the type of plastic, plastic parts thickness and shape and mold structure to appropriate selection.



Company Features
1. Since establishment, Euromicron Mould Engineering Limited has been an active role in the design and production of plastic mold factory . We are widely accepted in the industry.
2. The spreading fame of plastic parts also indicates the high quality.
3. The customer is always the starting point and end-point of the realization of value for Euromicron Mould Engineering Limited. Call! Euromicron Mould Engineering Limited's mission: manufacture reliable products at competitive prices. Call!
Our Services

We service for

OEM,ODM,Hotel,Factory,Government,Supermarket,Retailer,Dealer etc

 

After-sals service

 

1)We provide 1% spare parts of each model you purchased.

2)Our engineers provide professional technical guidance for our customers.

3)We provide you newest products information at the very first time. 

4) Supply the sample

5)  Design the artwork for you

our factory

 

Euromicron Mould plastic parts has a secured source of raw materials. Hicool's opticlimate packaged unit is exported to East Europe, the Middle East and South Africa
plastic parts design determines the final form of plastic parts from Euromicron Mould Engineering Limited. Hicool's opticlimate split unit is friendly to users as it is easy to operate
Euromicron Mould plastic parts is designed in accorance with the basic production standard. Opticlimate two-stage evaporation system has passed a series of strict quality tests
Euromicron Mould plastic mold factory is designed by the concerted effort of strong R&D team and design team. Opticlimate split unit achieves a uniform distribution and constant value of CO2 without losing CO2
In order to be the leading plastic mold factory manufacturers, our experts also focuses on its design. Hicool's opticlimate split unit is friendly to users as it is easy to operate
With the assistance of plastic mold factory, plastic mold factory has gained its popularity in the market. Opticlimate two-stage evaporation system can resist corrosion
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...