Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould new molding design request for quote for home
Euromicron Mould new molding design request for quote for home

Euromicron Mould new molding design request for quote for home
  • Euromicron Mould new molding design request for quote for home

Euromicron Mould new molding design request for quote for home

The quality of Euromicron Mould molding design is inspected at each step of the production process. The quality inspection includes IQC, IPQC, OQC and QA report for finished rubber parts. Nanfang ensures every valve is compliant with CE standards
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


Molding process parameters and process analysis of TV shell material


Molding process parameters

-- The molding process parameters of plastic parts mainly include temperature, pressure and time.
-- Temperature injection molding process needs to control the temperature of the barrel temperature, nozzle temperature and mold temperature.
(1) the selection of the temperature of the barrel should ensure that the plastics are well plasticized and can be injected without any trouble It causes the plastic to break down.
(2) the selection of nozzle temperature material barrel and nozzle temperature shall be compatible with other process conditions. Barrel and nozzle
The effect of temperature on the forming condition and the physical and mechanical properties of the plastic parts is very significant.
(3) the mold temperature has a great influence on the internal performance and performance quality of the plastic parts.
Mold temperature according to whether plastic parts crystallization, plastic parts size and structure requirements.

Euromicron Mould new molding design request for quote for home-1
Pressure in injection molding process includes plasticizing pressure and injection pressure, both of which directly affect the plasticizing of plastics and the quality of plastic parts.

(1) the plasticizing pressure in the injection process varies with the design of plastic rods, the quality requirements of plastic parts and the types of plastic parts.
(2) the injection pressure depends on the type of injection molding machine, mold structure, wall thickness of plastic parts, type of plastic parts and injection molding process.

The time of a single injection molding cycle includes injection time (mold filling time and pressure maintaining time), mold closing cooling time and other time (mold opening, mold release, mold coating, insert placement, mold closing time, etc.).

(1) the filling time in production is 3-5s.
The pressure holding time of injection time is large, usually about 20 ~ 120s.
Before the weld solidification at the gate, the length of the holding time has a direct impact on the size accuracy of the plastic parts, while that at the gate has no effect after condensation.
The holding time shall be subject to the time with the smallest contraction fluctuation range of the plastic part.
(2) the cooling time depends on the thickness of the plastic parts, their thermal and crystalline properties, and the mold temperature.
The cooling time is about 30 ~ 120s.
Too long cooling time will make it difficult to unform complex plastic parts.
Injection molding process control factors: temperature, pressure and time, all need to be based on the type of plastic, plastic parts thickness and shape and mold structure to appropriate selection.



Euromicron Mould plastic injection molding service is required to pass the quality tests including waterproof test, fire retardant test, colorfastness, anti-aging test, as well as air leakage test. Nanfang operates in line with ISO14001 environmental management requirements
The quality control of Euromicron Mould molding design is practiced right from the initial stage of sourcing fabrics to the stage of the final finished garments. Established in 2000, Nanfang specializes in R&D, design, and production of valves
The production process of Euromicron Mould molding design follows extremely stringent GB and IEC standards. These standards ensure that it can reach the predetermined luminous efficiency. Nanfang provides effective solutions for industrial flow control worldwide
Euromicron Mould molding design is produced in a dust-free and bacteria-free workshop in which the temperature and humidity are strictly controlled and monitored, so as to ensure its high quality. At Nanfang, every valve meets all requirements for plumbing in all countries
The production process of Euromicron Mould plastic injection molding service involves coagulation, a process that curdles or thickens the polyisoprene into a mass. This process is accomplished by adding an acid.
The product has good anti-electromagnetic interference. It is designed with special electromagnetic interference suppression components to reduce electromagnetic wave. Nanfang can customize flow control solutions for the most demanding application conditions and environments
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...