Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  > 

AI - Page Sitemap


Euromicron Mould molding plastic enclosure customized for andon electronics

Euromicron Mould molding plastic enclosure customized for andon electronics

Euromicron Mould molding plastic enclosure customized for andon electronics

Part Name
Part size
Raw Material
Mould Cavity No
Injection gate
Cold runner with sub gate
Surface finished
Get Latest Price
Get the latest price
Quantity Needed:
Company Advantages
1. Euromicron Mould plastic electrical enclosures is designed by our designers who carefully check the suitability of the chosen solution and give valuable advice concerning the selection of materials and finishes. The product goes through several inspections before delivery with defects removed
2. The product is highly recommended by customers due to its significant economic results. The complete after-sales service system is rendered for the product to maximize customer value
3. Comprehensive quality control is carried out to ensure that the product meets all relevant quality standards. The product is easy to assemble and maintain
4. The product is regularly reviewed for quality to ensure reliable quality. Company logo can be printed on the surface of the product
5. The quality of the product is in complete compliance with the set industry standards. Supported by the world-class manufacturing management system, it is of stable quality

Euromicron Mould molding plastic enclosure customized for andon electronics-1
Euromicron Mould molding plastic enclosure customized for andon electronics-2

◇◆ Product parameters

Part Name:socket
Part size:52*52*59mm
Raw Material:ABS
Mould Cavity No.:1*2
Injection gate:Cold runner with sub gate
Surface finished: VDI3400-33
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:DME or equivalent
Injection machine size:180T
Cycle time:35S
Mold life:100000 shots


Euromicron Mould molding plastic enclosure customized for andon electronics-3
Molded part

This socket has two slots on the two opposite sides close to the back wall.No witness marks from side sores or slides are permitted on the outer surface of the box between the upper edge and these openings.On the other had,sink marks are not allowed near the openings on both the side walls and inside of the box,since these areas are visible once the box is installed.

Mold design
The core of the mold,four small side holes are of conventional design.All remaining components are standard or off-the-shelf items.For instance,a standard mold base with dimensions of 200mmX300mm is employed.The mold shut height is 311mm,Plate thickness are also based on standard dimensions.
Steel grade 1.2344,through-hardened 48-52HRC,was employed for the mold cavity and core.An inner core with helical grooves provides cooling for the stationary-side mold plate. Given the art geometry and the requirement that there be no witness lines on the outside surface,the side cores for the round openings must be placed on the stationary side mold plate.
The ejector plate assembly is actuated by the ejector rod,which is connected to the injection machine ejector,All guiding and wear components have been treated with DME standard.

Company Features
1. Euromicron Mould Engineering Limited has productive bases strategically located around the China.
2. Euromicron Mould becomes more competitive and popular for its high-quality plastic enclosure .
3. We actively seek feedback to grow. Each piece of feedback from our clients is what we should pay much attention to, and is the opportunities for us to face and find out ourselves problems. Hence, we always keep an open mind and respond actively to clients' feedback. Get info!
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...