Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould molding electronic parts manufacturer for andon electronics
Euromicron Mould molding electronic parts manufacturer for andon electronics

Euromicron Mould molding electronic parts manufacturer for andon electronics
  • Euromicron Mould molding electronic parts manufacturer for andon electronics
  • Euromicron Mould molding electronic parts manufacturer for andon electronics
  • Euromicron Mould molding electronic parts manufacturer for andon electronics

Euromicron Mould molding electronic parts manufacturer for andon electronics

Part Name...
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


Part Name:Gateway
Part size:175*136*32mm
Raw Material:ABS+PC
Color:RAL9010,White
Mould Cavity No.:1*1
Injection gate:Hot runner with pin point gate
Surface finished: Mirror Polishing
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:180T
Cycle time:35S
Mold life:300000 shots
Customer:HEKATR@N
Export:Germany


◇◆ Summary for project running
This product used for electrical appliance,the gateway case and grid.Plastic raw material need in inflaming retarding and heat resistant.
Euromicron Mould molding electronic parts manufacturer for andon electronics-1

We carried out first trial shot on 40th day,little longer than planed.Since YUDO hot runner system came out of expected date,one week late.Three trial shots for samples production,and finished whole project in 50days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request.
Both parts critical surface need in high polishing,mirror grade,no any marked or scratch allowed.When production,have to take out by robot hand,and cover PE film for protection. Silkscreen also made by EMM factory.

Euromicron Mould molding electronic parts manufacturer for andon electronics-2

At first trial shot,case part came out with obvious sink mark and scratch on side surface. The ribs inside are too thick cause sink mark,and no draft angle on side surface cause scratch when mold open.Finally We cut rib material solved sink mark problem.But no draft angle allowed on side surface,we had to add two sliders on both side,to ensure all outside surface look glossy.
The grid part has many small window and only 0.6mm thick.We found flowing mark at each window corner and short shot problem at first trial shot.Then we suggested change high polishing surface to fine texture,VDI3400-33,also change injection gate location,from both side for filling.Customer confirmed and part came out look good.




Euromicron Mould electronic parts is designed by our professional designers who are aware of the ecological factor and apply environmental criteria of the sanitary ware industry to the design. Maintenance is easy in Kenwei packaging machine
Euromicron Mould electronic parts has gone through a series of assessment processes in terms of the construction structure which includes wind load test, snow load test, and pressure load test. Each Kenwei packaging machine is aging-tested for 7 days before delivery
The production of Euromicron Mould electronic parts is highly sanitary. It has to be produced in a dust-free environment to achieve the best water treatment effect. Kenwei packaging machine works at high speed
Euromicron Mould electronic parts is finished by adopting test equipment that measures the dynamic behavior of compound and simulates the behavior in different temperature environments. Quality control from material to finished product is taken strictly over Kenwei packaging machine
Euromicron Mould electronic parts is well designed. It is completed by using CAD design software and metal products industry-standard software to ensure the exact specifications. Kenwei packaging machine records less than 0.5% failure rate within 1 year
electronic parts have been widely used in electronic parts for their electronic parts features. Kenwei packaging machine is manufactured based on industry standards
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...