Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould molding electronic parts customized for andon electronics
Euromicron Mould molding electronic parts customized for andon electronics

Euromicron Mould molding electronic parts customized for andon electronics
  • Euromicron Mould molding electronic parts customized for andon electronics
  • Euromicron Mould molding electronic parts customized for andon electronics

Euromicron Mould molding electronic parts customized for andon electronics

Combining the lean production method with innovation and thoughtful design, Euromicron Mould plastic housing for electronics is exquisite in every detail. This product stands out for its exceptional hardness
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


Euromicron Mould molding electronic parts customized for andon electronics-1


◇◆ Product parameters


Part Name:switch
Part size:92.8*61.2*8.6mm
Raw Material:ABS
Color:RAL9010,White
Mould Cavity No.:1*4
Injection gate:Cold runner with sub gate
Surface finished: Polishing #600
Core &Cavity steel:M310,hardness 52~55HRC
Mold component standard:DME or equivalent
Injection machine size:250T
Cycle time:35S
Mold life:300000 shots
Customer:Siemens
Export:Uruguay


◇◆ Summary for project running
This product used for electrical appliance,the light switch.Plastic raw material need in inflaming retarding and heat resistant.
Euromicron Mould molding electronic parts customized for andon electronics-2

We carried out first trial shot on 35th day,twice trial shots for samples production,and finished whole project in 45days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request. Due to many thin and high side ribs,part stick on core side tightly.Mold need smooth polishing and need enough ejection pins and as big as possible.Sink mark problem on surface easily to cause,due the part thickness is too thick and not equal,we solved it by adjusting injection parameter.Four hooks distance need to be molding in high precision location,Because they will assemble to bottom shelf.To make it work well,we cut material at first trial shot.After checking first samples,made correction to mold.So that the secondary samples met assembly requirement.

Euromicron Mould molding electronic parts customized for andon electronics-3

Another problem we met on first trial shot was the ribs short shot.Because they were very thin and high,plastic filling easily to get cold when injection.Later we had a discussion,decided to change the side gate to two sub gates,change core cooling water to hot oil,100℃,and add injection pressure,so that filling time shorten a lot,finally we got excellent part. This experience also can apply to similar product with thin and high ribs.



One of the core competitiveness of Euromicron Mould plastic housing for electronics lies in its unique design. This product is able to direct natural light and has good quality
Euromicron Mould electronic parts is manufactured only with high-quality materials and to achieve it, we have established a strict material selection specification. It is extremely hard and durable to use
Euromicron Mould electronic parts adopts superior raw material which comes form some suppliers with a good reputation. Adopting German polishing technologies, this product has a smooth
Backed by our rich industry experience and market understanding, Euromicron Mould electronic parts is endowed with an innovative and well-received design. Combining elegance and simplicity, this product is popular with jewelry lovers
While manufacturing Euromicron Mould plastic housing for electronics, our skilled and qualified experts work with complete determination. It is able to retain its original luster when worn for a long time
The product is internationally certified and has a longer life than other products.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...