Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould molding electronic housing wholesale for andon electronics
Euromicron Mould molding electronic housing wholesale for andon electronics

Euromicron Mould molding electronic housing wholesale for andon electronics
  • Euromicron Mould molding electronic housing wholesale for andon electronics
  • Euromicron Mould molding electronic housing wholesale for andon electronics
  • Euromicron Mould molding electronic housing wholesale for andon electronics

Euromicron Mould molding electronic housing wholesale for andon electronics

Euromicron Mould Engineering Limited takes the leading position in the industry in terms of the production and quality of injection molded electronics .
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
Good materials, advanced production technology, and fine manufacturing techniques are used in the production of cnc service. It is of fine workmanship and good quality and is well sold in the domestic market.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Compared with products in the same category,Euromicron's cnc service's outstanding advantages are as follows.
Product Details
With the pursuit of perfection, Euromicron exerts ourselves for well-organized production and high-quality injection mold.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Good materials, advanced production technology, and fine manufacturing techniques are used in the production of injection mold. It is of fine workmanship and good quality and is well sold in the domestic market.
Company Advantages
1. electronic housing made from injection molded electronics materials are especially fit for the usage in injection moldable plastics field.
2. It comes with good breathability. It allows moisture vapor to pass through it, which is an essential contributing property to thermal and physiological comfort.
3. The water treated by this product is safe to drink. The built-in filter and membrane will filter out all contaminants that are present in the water such as bacteria, algae, viruses, and heavy metals.
4. Euromicron Mould is engaged in electronic housing production, R&D and service.
5. Euromicron Mould Engineering Limited has changed its quality control system so it can deal quickly with problems on a global basis.


Part Name:Electronic connector
Part size:18*15*3mm
Raw Material:NYLON+30%GF
Color:RAL9005,Black
Mould Cavity No.:16+16
Injection gate:Cold runner 
Surface finished: Polishing #600
Core &Cavity steel:1.2344, hardness 48~52HRC
Mold component standard:DME or equivalent
Injection machine size:120T
Cycle time:18S
Mold life:300000 shots
Customer:AEC
Export:USA


◇◆ Summary for project running
This product used for electrical connector. And was supposed to be molded in glass-fiber-reinforced, flame-retardant nylon.
Euromicron Mould molding electronic housing wholesale for andon electronics-1

There are many small pin holes on part. Hole’s diameter is 0.6mm with 2.2mm distance of each. Dimension tolerance should be within +/-0.01mm.   Mold design-We will make this mold with 2+2cavity, cold runner in to banana gate. To make parts leave on core side, parting line should be on top. And all pin holes location need to be inserted. Because the hole diameter and distance need to keep in strict tolerance. Separated insert make it easy to replace. Need to pay high attention to electrode making and EDM process. We made whole electrode include all pin holes position, then checked by CMM machine, until shown it was made in proper dimension, took to Mirror EDM manufacture.

Euromicron Mould molding electronic housing wholesale for andon electronics-2

Injection-Any mismatch or flash in switch(female half) hole would cause male half pin bend, so this request holding pressure not too high. but also guarantee not cause sink mark on outside surface. Although the part and mold is small, enough cooling line still necessary. Because the part quantity in demand is one million each month, we need to cut down cycle time as much as possible. So that we can save production cost.




Company Features
1. Euromicron Mould Engineering Limited takes the leading position in the industry in terms of the production and quality of injection molded electronics .
2. Our technical staff will solve all possible problems during manufacturing electronic housing .
3. We place high demands on the quality of electronic parts . Through continuous innovation, Euromicron Mould Engineering Limited aims to take the lead in the field of plastic enclosure box. Ask! Euromicron Mould has always been committed to providing one-stop service for domestic and foreign customers. Ask! Our team ​​attaches great importance to the details of any quality or service. Ask!
Euromicron Mould plastic enclosure box is manufactured using materials that has been approved by related quality certifications. The product is extensively used in the industry
Euromicron Mould electronic housing is manufactured by using superior quality raw material and progressive technology under the vigilance of proficient professionals. It is easy to operate and easy to maintain
The improved production efficiency ensures Euromicron Mould electronic housing is given a more competitive price. It is easy to operate and easy to maintain
Euromicron Mould electronic housing is made of materials that are purchased from reputed suppliers. This product remains reliable in rigorous conditions such as strong corrosion and impact
Euromicron Mould injection moldable plastics is produced by using state-of-the-art technology. The product can be reused, hence it is socially and environmentally friendly
The product is approved by experts and has good performance, durability and practicality. This product is not likely to deform
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...