Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould molding custom plastic box wholesale for electronic components
Euromicron Mould molding custom plastic box wholesale for electronic components

Euromicron Mould molding custom plastic box wholesale for electronic components
  • Euromicron Mould molding custom plastic box wholesale for electronic components
  • Euromicron Mould molding custom plastic box wholesale for electronic components
  • Euromicron Mould molding custom plastic box wholesale for electronic components
  • Euromicron Mould molding custom plastic box wholesale for electronic components
  • Euromicron Mould molding custom plastic box wholesale for electronic components

Euromicron Mould molding custom plastic box wholesale for electronic components

This cover is part...
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
Euromicron provides diversified choices for customers. injection mold is available in a wide range of types and styles, in good quality and in reasonable price.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Euromicron guarantees cnc service to be high-quality by carrying out highly standardized production. Compared with other products in the same category, it has the following advantages.
Enterprise Strength
  • Our excellence comes from the efforts of staff from such departments as R&D department, sales department, design department and production department. There are designers, R&D experts, and after-sales personnel in our company.
  • Euromicron runs the business in good faith and strives to provide thoughtful and quality services for customers and to achieve mutual benefit with them.
  • Euromicron always sticks to our tenet of "quality comes first" by focusing on the quality control, service improvement, and fast response.
  • We have been dedicated to the manufacturing of cnc service for about years, and have become the leading enterprise in the industry. This enables us to introduce and operate a complete set of production equipment, and achieve intelligentization and standardization.
  • Since the establishment, our sales network has been continuously expanding to where our sales service is highly appraised by customers at home and abroad. In future, we would like to establish our marketing network overseas and expand the business further.
Company Advantages
1. Euromicron Mould injection moldable plastics is made with premium grade materials.
2. The product provides reliable and safe electricity energy. It is less likely to have short circuits problem or easily affected by large currents.
3. Euromicron Mould Engineering Limited upholds the most professional and most responsible service concept.
4. The popularity of custom plastic box also can not be achieved without the contribution of service team.


This cover is part of an telecom set-top box.
The appearance surface has dimension of 396X56X45mm.There are one round opening ¢35 and one rectangular opening 20X150mm.Also there are many boss and rid in high side.There is undercut on right wall of long side.
Euromicron Mould molding custom plastic box wholesale for electronic components-1
Euromicron Mould molding custom plastic box wholesale for electronic components-2



◇◆ Product Features


Euromicron Mould molding custom plastic box wholesale for electronic components-3
Mold design

We set sprue bushing on round opening,when fill with sub gate from both sides.Ejector sleeve need locate on boss to help release part.Pin or insert for high side rib to help air venting,also for easily manufacture or EMD process.A slider would be need for side undercut.Since all outside surface are visible,no slider split line is allowed.This mean a tunnel slider would be needed on core side.Mold base size would be 600X400mm with height 350mm.The design of the mold provide for simultaneous opening of the two parting lines with the aid of two racks and a pinion for each side.As it is essential that no gate marks show on the front of the molded parts,injection had to take place on the inside.

Euromicron Mould molding custom plastic box wholesale for electronic components-4
Cooling

This cover transfer heat quickly to mold surfaces.so that increased outlay on the cooling system is worthwhile in molds for such parts.Cooling of the core should be given special attention.Also some of the inserts are thin and very high.A beryllium/copper cap with six radial cooing channels is placed on the core insert.These cooling channel require drilling of the center of rube leading to the cap.This drilling weakens the center tube and there is the risk of rupture if the mounting nuts are tightened excessively.Compression spring are provided to permit an exactly defined tightening torque.Coolant is supplied to the cooling channels in the slides via tubes threaded into the slides.Slots in the guide strips allow these tubes to follow the motion of the slides.



Company Features
1. Euromicron Mould Engineering Limited is a professional company engaged in the R&D, design, and manufacturing of injection moldable plastics for many years.
2. Our manufacturing plant is next to the airport and port. This advantageous location provides us with a good transportation base for the distribution of our products.
3. By working with our clients to put sustainability into practice, we are helping them become more profitable over time and reinforcing our commitment to development for the long haul. Please contact. Euromicron Mould respects the client's right to confidentiality. Please contact. We have launched our strategy for sustainable growth, setting out our determination to build a sustainable business for the long term. Please contact.
The design of Euromicron Mould injection moldable plastics is human-oriented. It takes various factors into consideration, including the functionality and practicality that bring to people's life, convenience, and safety level. The ferrule handle design gives the best control of grip while applying makeup
Euromicron Mould custom plastic box undergoes strict materials selection. Some important factors related to human health such as the content of formaldehyde & lead and the damage of chemical sustenances must be considered. The product applies to all kinds of cosmetics
In the design of Euromicron Mould custom plastic box, various elements have been thought of. They involve physical stress points, weight distribution, arch support, and various foot shapes. The product includes a mix of synthetic fibers for ultimate softness
Many important performance tests for Euromicron Mould injection moldable plastics have been conducted. They include slip resistance, abrasion resistance, rubbing colorfastness, bacteria resistance, and washability tests. The brush shape can be customized into a flat blender, tapered blender, angled, round, flat top, angled crease, etc
Euromicron Mould custom plastic box is required to be tested by the third-party labs. It will be tested with regard to dimensional stability, durability, softness, breathability, and abrasion or pilling performance. It is suitable for both professional makeup artists and beginners
Euromicron Mould is offering an assortment of quality-approved product. The fibers or materials feature anti-bacterial properties that resist bacteria growth
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...