Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  > 

AI - Page Sitemap

 > 

Euromicron Mould molding communication processor manufacturer for andon electronics

Euromicron Mould molding communication processor manufacturer for andon electronics

Euromicron Mould molding communication processor manufacturer for andon electronics

Product Name
Electronic connector
Product size
35*29.5*26mm
Material
PA9T30GF
Cavity
1*4
Cycle time
40S
Customer
Bitron
Export
Italy
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
Euromicron provides diversified choices for customers. die casting mold is available in a wide range of types and styles, in good quality and in reasonable price.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Compared with products in the same category, Euromicron's die casting mold has the following outstanding features.
Application Scope
The cnc service produced by Euromicron is very popular in the market and is widely used in Manufacturing Industrial Parts Moulds industry.Euromicron always focuses on meeting customers' needs. We are dedicated to providing customers with comprehensive and quality solutions.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.
Company Advantages
1. All raw materials of Euromicron Mould communication processor are strictly selected and then are put into a precision production.
2. With its unique style and sophisticated technology, the performance plastic case for electronics has been magnified.
3. This kind of material is best for making shoes for running, skateboarding, keeping the foot cool or warm (such as sandals or boots) or just to protect the foot and look stylish.


This connector was supposed to be molded in glass-fiber-reinforced,flame-retardant nylon.
It came with size 35X29.5X26mm,with 40pcs pins in center.High rib,hooks and boss on round side.One four cavity mold should employ a mold base dimension 250*230mm,with 280mm height.Steel grade 1.2767 is used for the mold inserts,while grade 1.2312 is employed for mold plates as well as the ejector plate.Steel grade 1.1730 is mused for remaining plate and rails.Thermal insulating plates,which are available in sizes to match the standard mold plates,serve to insulate the mold from the machine platens.
Euromicron Mould molding communication processor manufacturer for andon electronics-1
Euromicron Mould molding communication processor manufacturer for andon electronics-2



◇◆ Mold design


Euromicron Mould molding communication processor manufacturer for andon electronics-3

This part is simple,but need to ensure 40pcs pin locate properly when plastic filling,specially under high pressure flow.To save production cost,we need to cut down cycle time.So two or three even more over-mold inserts need.Injection machine operator no need to set pin one by one into mold.Just need to set in additional insert before molding.When mold open,just need put whole insert with pin into core.Of course,operator need to take part with insert together.The hooks on both sides are undercut,need design for slider or angle lifter.But no slider split line allow in middle surface.So split line should be set on radius of corner.

The molded part is ejected via knockout pins.In addition to providing for ejection.these pins serve to vent the cavity during filling.It is in part for this reason that the knockout pins are located beneath ribs and other deep section of the part.where entrapped air is to be expected.The mold filling pattern during injection of the molding compound as well as the mechanical and thermal aspects of the mold design were simulated and established during the design phase with the aid of appropriate computer programs.



Company Features
1. Euromicron Mould Engineering Limited is slowly expanding its foreign market communication processor by expanding production lines.
2. The high quality of custom plastic box can't exist without its cutting-edge technology.
3. Our company is committed to reducing the environmental impact of our businesses and promoting the sustainable development of natural resources. To achieve this mission, we will conduct business in accordance with applicable environmental laws, regulations, and policies. We build a sustainable business based on uncompromising ethics, integrity, fairness, diversity, and trust among our suppliers, retailers, consumers, and everyone we touch.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...