Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould made car door molding one-stop service supplier for merchant
Euromicron Mould made car door molding one-stop service supplier for merchant

Euromicron Mould made car door molding one-stop service supplier for merchant
  • Euromicron Mould made car door molding one-stop service supplier for merchant
  • Euromicron Mould made car door molding one-stop service supplier for merchant

Euromicron Mould made car door molding one-stop service supplier for merchant

Euromicron Mould automotive plastic components is developed by the R&D team who have spent years investigating water improvement. The team creates this product with the purpose of reducing or removing all contaminants that are present in the water.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
cnc service, manufactured based on high-quality materials and advanced technology, has reasonable structure, excellent performance, stable quality, and long-lasting durability. It is a reliable product which is widely recognized in the market.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Compared with similar products, Euromicron's cnc service has the following advantages.
Company Advantages
1. Euromicron Mould automotive plastic components is developed by the R&D team who have spent years investigating water improvement. The team creates this product with the purpose of reducing or removing all contaminants that are present in the water.
2. car door molding which has been widely applied to automotive plastic components area has peculiarities such as injection molding manufacturing companies .
3. Comparing with standard automotive plastic components , many advantages of car door molding are shown by injection molding manufacturing companies .
4. Euromicron Mould Engineering Limited has professionalized its service system to benefit the customer with convenience.
5. 'Customer Satisfaction' is the evaluation standard of car door molding .


This trail mold was used to injection Auto door plastic part in different thermoplastics, such as  PC/ABS blend and modified PA, elastomer-modified PC, PC/PBTP blend and modified PBTTB for a number of manufacturing companies.
The two-cavities mold for Auto door plastic part consists essentially of sprue half with the hot runner system and the ejector mold half. Pillars and bushings serve to guide the two mold halves. When the mold is closed. The mold halves are fixed relative to each other via angled surfaces and wear plates.
Gating and temperature control. The molding compound passes through a sprue bushing into the hot runner made of steel (material number 1.2311). From four heated nozzles, also of steel (material number 1.2162), it passes through cold feed channels to the various gates of the mold cavity. The gates measure 15 mm X 1.2 mm.

Euromicron Mould made car door molding one-stop service supplier for merchant-1

The hot runner manifold block is heated by cartridge heaters which are pressed against it by laterally bolted cover strips. The distributor lies in a recess of the feed-side mold plate and is pressed by the hot runner covering plate against the nozzles via spacer rings. Guide components prevent the manifold from twisting about the locating device. They also allow the manifold to expand and contract during heating and cooling. The hot runner nozzles are each centered in their locator bores in mold plate by means of three contact surfaces in such a way that they do not experience the expansion and contraction undergone by the manifold. The contact surfaces facing the manifold are convex. Transfer areas for the molding compound are sealed with steel O-rings. The ends of the hot runner nozzles on the mold side have conical bores. In this region. Their exteriors fit snugly into the mold platen to ensure good thermal conduction and thus rapid cooling of the sprue formed therein.

On mold opening, the frozen sprue separates from the hot melt in the manifold at the narrowest point of the conical bore. The nozzles are heated with heating collars. Two temperature probes are attached to each nozzle to monitor and regulate the temperature. The cartridge heaters in the manifold are arranged in seven groups, each of which is individually regulated. The cartridges have an installed rating of about 40 KW.
The melt pressure in the manifold is registered by pressure sennsor P. and that in the cavity, by sensor P. and cann therefore be used for control purposes. The temperature-control system consists of a network of bores in the two mold hales. Heat sensors T measure the temperature in the mold.
Ejection of the Auto door plastic part
When the mold opens, the molded part remains in the moving half. The sprues are also held in place by sprue pullers above the ejector pins. As soon as the stripper plates are pushed forward by the ejector of the machine, the ejector pins push the molded part along with the sprues from the mold core. On mold closing, the ejector plates and thus also the ejector pins are pushed back by ejector-plate return pins. The mold plate is supported by rolls projecting right through the ejector plates to the clamping plate.



Company Features
1. Euromicron Mould Engineering Limited is the largest and most powerful car door molding operation in the world.
2. Euromicron Mould Engineering Limited is powerful and strong in R&D capability.
3. Hopefully, our automotive plastic components will be successful in reaching out to the world. Ask online! We believe that our injection molding manufacturing companies will also be successful in our client market.
Each detail of Euromicron Mould injection molding manufacturing companies is carefully crafted by using the latest advanced technology. The certificates of CE and SGS have been granted to the product
The production of Euromicron Mould injection molding manufacturing companies adopts the highest quality sustainable finishes and materials. It is not easy to get rusty
injection molding manufacturing companies features in different styles and car door molding. It can be adjusted during operations based on actual needs
It is a great addition for injection molding manufacturing companies to design automotive plastic components. The product generates low noise when operating
Euromicron Mould injection molding manufacturing companies has an eye-catching design style. Made of stainless steel materials, it has the advantage of high strength
The product is excellent in overall quality and longevity. The framework is constructed with 100% solid wood, which guarantees its weight. Some parts of the product are detachable for easy carry
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...