Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould injection plastic prototype manufacturer for electronic components
Euromicron Mould injection plastic prototype manufacturer for electronic components

Euromicron Mould injection plastic prototype manufacturer for electronic components
  • Euromicron Mould injection plastic prototype manufacturer for electronic components
  • Euromicron Mould injection plastic prototype manufacturer for electronic components
  • Euromicron Mould injection plastic prototype manufacturer for electronic components

Euromicron Mould injection plastic prototype manufacturer for electronic components

Part Name:
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Before the production of Euromicron Mould custom plastic cases for electronics , the requirements of raw materials such as substances function, allergens, size, color, and odor are sent to several suppliers to be compared. It is produced in the large-scale workshops, making mass production possible
2. Euromicron Mould Engineering Limited's customer service has got to keep the clients' happiness in mind. The surface of the product adopts scratch-resistant coating
3. This product features a consistent appearance. Its CNC manufacturing technology can help maintain constant pressure and ensure its smooth, clean edges, and no bumps. The product has an output of 50 sets per month


Part Name:Electronic connector
Part size:18*15*3mm
Raw Material:NYLON+30%GF
Color:RAL9005,Black
Mould Cavity No.:16+16
Injection gate:Cold runner 
Surface finished: Polishing #600
Core &Cavity steel:1.2344, hardness 48~52HRC
Mold component standard:DME or equivalent
Injection machine size:120T
Cycle time:18S
Mold life:300000 shots
Customer:AEC
Export:USA


◇◆ Summary for project running
This product used for electrical connector. And was supposed to be molded in glass-fiber-reinforced, flame-retardant nylon.
Euromicron Mould injection plastic prototype manufacturer for electronic components-1

There are many small pin holes on part. Hole’s diameter is 0.6mm with 2.2mm distance of each. Dimension tolerance should be within +/-0.01mm.   Mold design-We will make this mold with 2+2cavity, cold runner in to banana gate. To make parts leave on core side, parting line should be on top. And all pin holes location need to be inserted. Because the hole diameter and distance need to keep in strict tolerance. Separated insert make it easy to replace. Need to pay high attention to electrode making and EDM process. We made whole electrode include all pin holes position, then checked by CMM machine, until shown it was made in proper dimension, took to Mirror EDM manufacture.

Euromicron Mould injection plastic prototype manufacturer for electronic components-2

Injection-Any mismatch or flash in switch(female half) hole would cause male half pin bend, so this request holding pressure not too high. but also guarantee not cause sink mark on outside surface. Although the part and mold is small, enough cooling line still necessary. Because the part quantity in demand is one million each month, we need to cut down cycle time as much as possible. So that we can save production cost.




Company Features
1. With an advanced production line, Euromicron Mould has a mature production technology.
2. The strong R&D team is the continuous developing power resource of Euromicron Mould.
3. As the high expectations of Euromicron Mould, we try our best to serve plastic prototype . Contact us!
The design of Euromicron Mould custom plastic cases for electronics complies with the principles below: accuracy, repeatability, simplicity&complexity, the management of friction, etc. It has a high receiving sensitivity and transmitting capability
Euromicron Mould custom plastic cases for electronics has passed the necessary assessments. They may include part tolerances, size limitations, materials properties, mechanical analysis, function realization, etc. It can function well in an environment with a wider range of signals
Workmanship for Euromicron Mould plastic prototype is conducted based on its actual usages. Its mechanical parts will go through heat treatment, finish machining, and even ultrasonic machining. The product can be used for commercial events, security and sports
The design of Euromicron Mould custom plastic cases for electronics is novel and fashionable with complete functions. It has bright color and smooth texture. It gives a comfortable touch. Made of lightweight material, it can be conveniently carried around
The design of Euromicron Mould plastic prototype is very practical. It is carefully designed according to the size, weight, and characteristics of the product to be packaged. It can function well in an environment with a wider range of signals
The product passes through the extremely harsh quality control and inspection process. The product has passed the certification of CE and FCC
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...