Euromicron Mould Engineering Limited was found in 1995

Home  >  Customized Application  >  Electrommunication For sell  >  Euromicron Mould injection plastic prototype customized for andon electronics
Euromicron Mould injection plastic prototype customized for andon electronics

Euromicron Mould injection plastic prototype customized for andon electronics

Part Name
Gateway
Part size
175*136*32mm
Raw Material
ABS+PC
Color
RAL9010,Whit
Mould Cavity No
1*1
Injection gate
Hot runner with pin point gate
Surface finished
Mirror Polishing
Application Scope
die casting mold produced by Euromicron is mainly used in the following fields.With a focus on customers, Euromicron analyzes problems from the perspective of customers and provides comprehensive, professional and excellent solutions.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.
Company Advantages
1. The offered Euromicron Mould plastic prototype is designed in accordance with the industry norms and standards.
2. This product provided by Euromicron Mould is at the best possible rate with the best quality.
3. People can benefit equal nutrients from the dehydrated food by this product. The nutrients ingredients have been inspected to be the same as pre-dehydration after the food is dehydrated.


Part Name:Gateway
Part size:175*136*32mm
Raw Material:ABS+PC
Color:RAL9010,White
Mould Cavity No.:1*1
Injection gate:Hot runner with pin point gate
Surface finished: Mirror Polishing
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:180T
Cycle time:35S
Mold life:300000 shots
Customer:HEKATR@N
Export:Germany


◇◆ Summary for project running
This product used for electrical appliance,the gateway case and grid.Plastic raw material need in inflaming retarding and heat resistant.

We carried out first trial shot on 40th day,little longer than planed.Since YUDO hot runner system came out of expected date,one week late.Three trial shots for samples production,and finished whole project in 50days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request.
Both parts critical surface need in high polishing,mirror grade,no any marked or scratch allowed.When production,have to take out by robot hand,and cover PE film for protection. Silkscreen also made by EMM factory.

At first trial shot,case part came out with obvious sink mark and scratch on side surface. The ribs inside are too thick cause sink mark,and no draft angle on side surface cause scratch when mold open.Finally We cut rib material solved sink mark problem.But no draft angle allowed on side surface,we had to add two sliders on both side,to ensure all outside surface look glossy.
The grid part has many small window and only 0.6mm thick.We found flowing mark at each window corner and short shot problem at first trial shot.Then we suggested change high polishing surface to fine texture,VDI3400-33,also change injection gate location,from both side for filling.Customer confirmed and part came out look good.




Company Features
1. Euromicron Mould Engineering Limited has been a trusted company in the Chinese market. We never fail to deliver high quality custom plastic enclosures .
2. We are proud to say that plastic prototype is made to be eco-friendly and natural.
3. It's our sincere hope that our electrical molding will be of great help to customers. Inquire now! Creating value for customer is Euromicron Mould Engineering Limited's unremitting dream! Inquire now!
Chat Online 编辑模式下无法使用
Chat Online inputting...