Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould injection plastic enclosure manufacturer for electronic components
Euromicron Mould injection plastic enclosure manufacturer for electronic components

Euromicron Mould injection plastic enclosure manufacturer for electronic components
  • Euromicron Mould injection plastic enclosure manufacturer for electronic components
  • Euromicron Mould injection plastic enclosure manufacturer for electronic components
  • Euromicron Mould injection plastic enclosure manufacturer for electronic components

Euromicron Mould injection plastic enclosure manufacturer for electronic components

Euromicron Mould Engineering Limited is rich in industry experience of manufacturing and selling plastic enclosure .
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Color is one of the important factors to consider when designing Euromicron Mould electronica injection moulding as it is the first element to which consumers respond, often selecting or rejecting a garment because of its color appeal. With the development of science and technology, the product is upgraded quickly
2. Euromicron Mould Engineering Limited is famous at home and abroad for its high quality plastic enclosure . The product is easy to assemble and maintain
3. In its production, we place the highest value on reliability and quality. It is suitable for use in the high-temperature environment


Part Name:Gateway
Part size:175*136*32mm
Raw Material:ABS+PC
Color:RAL9010,White
Mould Cavity No.:1*1
Injection gate:Hot runner with pin point gate
Surface finished: Mirror Polishing
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:180T
Cycle time:35S
Mold life:300000 shots
Customer:HEKATR@N
Export:Germany


◇◆ Summary for project running
This product used for electrical appliance,the gateway case and grid.Plastic raw material need in inflaming retarding and heat resistant.
Euromicron Mould injection plastic enclosure manufacturer for electronic components-1

We carried out first trial shot on 40th day,little longer than planed.Since YUDO hot runner system came out of expected date,one week late.Three trial shots for samples production,and finished whole project in 50days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request.
Both parts critical surface need in high polishing,mirror grade,no any marked or scratch allowed.When production,have to take out by robot hand,and cover PE film for protection. Silkscreen also made by EMM factory.

Euromicron Mould injection plastic enclosure manufacturer for electronic components-2

At first trial shot,case part came out with obvious sink mark and scratch on side surface. The ribs inside are too thick cause sink mark,and no draft angle on side surface cause scratch when mold open.Finally We cut rib material solved sink mark problem.But no draft angle allowed on side surface,we had to add two sliders on both side,to ensure all outside surface look glossy.
The grid part has many small window and only 0.6mm thick.We found flowing mark at each window corner and short shot problem at first trial shot.Then we suggested change high polishing surface to fine texture,VDI3400-33,also change injection gate location,from both side for filling.Customer confirmed and part came out look good.




Company Features
1. Euromicron Mould Engineering Limited is rich in industry experience of manufacturing and selling plastic enclosure .
2. Euromicron Mould Engineering Limited is technologically leading as a electronic parts manufacturer.
3. Paying more attention to the implement of electronic housing is very important for the popularity of Euromicron Mould. Ask online!
The design of Euromicron Mould electronica injection moulding involves several stages. They are trend studies, fabric and accessory research, sample making, etc. Applied in a photovoltaic system, it is absolutely pollution-free
The tests for Euromicron Mould electronica injection moulding have been conducted. These tests include wiring of main control cabinets, including PLC wiring and operator stations. The product has been certified under RoHS, CE, and other domestic and international authoritative certifications
The production process of Euromicron Mould plastic enclosure covers the following stages. They are materials receiving, materials cutting, molding, component fabricating, parts assembling, and finishing. All these processes are conducted by professional technicians with years of experience in upholstery. Applied in a photovoltaic system, it is absolutely pollution-free
The manufacture of Euromicron Mould electronic parts is divided into a few aspects. They are mainly materials preparation, mechanical components' cleaning, cutting, milling, welding, and parts assembly. With the circuit protection function, its components such as fuse are not easily burned out
Euromicron Mould plastic enclosure has passed a series of security tests. It has been tested the electric strength test, also known as high-voltage insulation test, water-resistant test, and tests for potential overload and statics. The product has been certified under RoHS, CE, and other domestic and international authoritative certifications
The product has stable performance, long storage life and reliable quality. The product has overload and over/under-pressure protection
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...