Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould injection plastic enclosure box manufacturer for electronic components
Euromicron Mould injection plastic enclosure box manufacturer for electronic components

Euromicron Mould injection plastic enclosure box manufacturer for electronic components
  • Euromicron Mould injection plastic enclosure box manufacturer for electronic components
  • Euromicron Mould injection plastic enclosure box manufacturer for electronic components

Euromicron Mould injection plastic enclosure box manufacturer for electronic components

plastic enclosure box fabricate by Euromicron Mould Engineering Limited is primarily made by injection moldable plastics . Its appearance is stylish and creates a stereoscopic sense
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. plastic enclosure box fabricate by Euromicron Mould Engineering Limited is primarily made by injection moldable plastics . Its appearance is stylish and creates a stereoscopic sense
2. Over the years,the sales of the product has grown rapidly in the market and its market potential is viewed as vast. The surface of the product adopts scratch-resistant coating
3. The service life of product far exceeds the industry average. Made of well-selected materials, the product has a long service life


Euromicron Mould injection plastic enclosure box manufacturer for electronic components-1


◇◆ Product parameters


Part Name:switch
Part size:92.8*61.2*8.6mm
Raw Material:ABS
Color:RAL9010,White
Mould Cavity No.:1*4
Injection gate:Cold runner with sub gate
Surface finished: Polishing #600
Core &Cavity steel:M310,hardness 52~55HRC
Mold component standard:DME or equivalent
Injection machine size:250T
Cycle time:35S
Mold life:300000 shots
Customer:Siemens
Export:Uruguay


◇◆ Summary for project running
This product used for electrical appliance,the light switch.Plastic raw material need in inflaming retarding and heat resistant.
Euromicron Mould injection plastic enclosure box manufacturer for electronic components-2

We carried out first trial shot on 35th day,twice trial shots for samples production,and finished whole project in 45days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request. Due to many thin and high side ribs,part stick on core side tightly.Mold need smooth polishing and need enough ejection pins and as big as possible.Sink mark problem on surface easily to cause,due the part thickness is too thick and not equal,we solved it by adjusting injection parameter.Four hooks distance need to be molding in high precision location,Because they will assemble to bottom shelf.To make it work well,we cut material at first trial shot.After checking first samples,made correction to mold.So that the secondary samples met assembly requirement.

Euromicron Mould injection plastic enclosure box manufacturer for electronic components-3

Another problem we met on first trial shot was the ribs short shot.Because they were very thin and high,plastic filling easily to get cold when injection.Later we had a discussion,decided to change the side gate to two sub gates,change core cooling water to hot oil,100℃,and add injection pressure,so that filling time shorten a lot,finally we got excellent part. This experience also can apply to similar product with thin and high ribs.



Company Features
1. Known as a professional plastic enclosure box manufacturer, Euromicron Mould Engineering Limited has a wide market share. As a company with technical validity, Euromicron Mould Engineering Limited has a variety of plastic prototype manufacturing lines.
2. Euromicron Mould Engineering Limited includes a strong technical foundation and manufacturing capacities.
3. Euromicron Mould Engineering Limited has strong technical force, with modern production technology and equipment. We make clear commitments to our customers. We try to ensure that every link in the manufacturing chain works seamlessly, from order generation to final delivery and offer the highest-value products.
The quality control department must carry out rigorous testing on Euromicron Mould injection moldable plastics. These tests typically involve leakage detection, short circuit detection, and electrical load capability testing. The stitches of this product are uniform and neat
During the development stage of Euromicron Mould injection moldable plastics, different factors have been taken into consideration. They are mainly structure stability, statics, mechanical properties, the whole efficiency, etc. It features a comfortable fit that makes women look good no matter what their body type
The production of Euromicron Mould plastic prototype is eco-friendly and does not generate any water, air or noise pollution. And the cleaning process guarantees it is meticulously cleaned and free of dust and odor. Wearing this product can have an extreme effect on the self-esteem of a woman
The creation of Euromicron Mould plastic prototype is in line with international electrical safety standards. It meets the requirements of IEC, EMC, CE marking, etc. It can be worn again and again without worrying will lose its shape
The following tests must be performed in Euromicron Mould plastic prototype production. These tests involve dielectric withstand inspection, insulation resistance inspection, leakage current inspection, and the like. Due to its moisture-wicking property, this product will not accumulate odor
This product is safe to use. It is tested many times to prevent the use of coatings involving hazardous solvents and hazardous chemicals in its applications. The reinforced stitching makes this product less likely to burst
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...