Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould injection electronic parts supplier for andon electronics
Euromicron Mould injection electronic parts supplier for andon electronics

Euromicron Mould injection electronic parts supplier for andon electronics
  • Euromicron Mould injection electronic parts supplier for andon electronics
  • Euromicron Mould injection electronic parts supplier for andon electronics
  • Euromicron Mould injection electronic parts supplier for andon electronics
  • Euromicron Mould injection electronic parts supplier for andon electronics
  • Euromicron Mould injection electronic parts supplier for andon electronics

Euromicron Mould injection electronic parts supplier for andon electronics

This cover is part...
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


This cover is part of an telecom set-top box.
The appearance surface has dimension of 396X56X45mm.There are one round opening ¢35 and one rectangular opening 20X150mm.Also there are many boss and rid in high side.There is undercut on right wall of long side.
Euromicron Mould injection electronic parts supplier for andon electronics-1
Euromicron Mould injection electronic parts supplier for andon electronics-2



◇◆ Product Features


Euromicron Mould injection electronic parts supplier for andon electronics-3
Mold design

We set sprue bushing on round opening,when fill with sub gate from both sides.Ejector sleeve need locate on boss to help release part.Pin or insert for high side rib to help air venting,also for easily manufacture or EMD process.A slider would be need for side undercut.Since all outside surface are visible,no slider split line is allowed.This mean a tunnel slider would be needed on core side.Mold base size would be 600X400mm with height 350mm.The design of the mold provide for simultaneous opening of the two parting lines with the aid of two racks and a pinion for each side.As it is essential that no gate marks show on the front of the molded parts,injection had to take place on the inside.

Euromicron Mould injection electronic parts supplier for andon electronics-4
Cooling

This cover transfer heat quickly to mold surfaces.so that increased outlay on the cooling system is worthwhile in molds for such parts.Cooling of the core should be given special attention.Also some of the inserts are thin and very high.A beryllium/copper cap with six radial cooing channels is placed on the core insert.These cooling channel require drilling of the center of rube leading to the cap.This drilling weakens the center tube and there is the risk of rupture if the mounting nuts are tightened excessively.Compression spring are provided to permit an exactly defined tightening torque.Coolant is supplied to the cooling channels in the slides via tubes threaded into the slides.Slots in the guide strips allow these tubes to follow the motion of the slides.



Euromicron Mould electronic parts has been seriously tested. Its properties such as strength, ductility, and toughness are all verified by these tests. It is a great addition to any outfit with its simple design and look
Euromicron Mould electronic parts is finely developed by the R&D staff. It is built with various characteristics under the concept of high techs, such as shock-proof, scratch-resistant, and corrosion-resistance capacities in mechanical working conditions. The high-quality rubber provides every move to keep flexibility
Euromicron Mould electronic parts has undergone rigorous testing during the production process. Care has been taken to check for defects that are poorly durable, incompletely bonded, and stitched. The product is not easy to tear
The development of Euromicron Mould plastic case for electronics has taken different factors into consideration. They are mainly structure fabrication, mechanical parts stability, welding quality, and the whole machine efficiency. The product is characterized by strong toughness
The design of Euromicron Mould plastic case for electronics follows these steps. They include the determination of forces acting on and energy transmitted by each element; selection of materials; confirmation of size and shape, etc. The anti-slip outsole provides stable support during outdoor activities
The product uses intelligent design. Any problems in the production process at any time will shut down the system to avoid further problems or fix problems internally. The product is resilient and can restore its shape very quickly
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...