Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould injection custom plastic box customized for andon electronics
Euromicron Mould injection custom plastic box customized for andon electronics

Euromicron Mould injection custom plastic box customized for andon electronics
  • Euromicron Mould injection custom plastic box customized for andon electronics
  • Euromicron Mould injection custom plastic box customized for andon electronics
  • Euromicron Mould injection custom plastic box customized for andon electronics
  • Euromicron Mould injection custom plastic box customized for andon electronics
  • Euromicron Mould injection custom plastic box customized for andon electronics

Euromicron Mould injection custom plastic box customized for andon electronics

The manufacturing process of Euromicron Mould plastic case for electronics is complicated. This process involves preparing the pattern, stitching, lasting (forming the final shoe) and final assembly.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Application Scope
Euromicron's cnc service can be widely used in various fields.Euromicron insists on providing customers with reasonable solutions according to their actual needs.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.
Product Details
Euromicron strives excellent quality by attaching great importance to details in the production of die casting mold.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Euromicron has great production capability and excellent technology. We also have comprehensive production and quality inspection equipment. die casting mold has fine workmanship, high quality, reasonable price, good appearance, and great practicality.
Company Advantages
1. The manufacturing process of Euromicron Mould plastic case for electronics is complicated. This process involves preparing the pattern, stitching, lasting (forming the final shoe) and final assembly.
2. It is less susceptible to damage from the environment. Designers carefully thought about how surrounding climate can affect its performance and longevity to ensure there are minimal issues.
3. The product is able to maximum satisfaction to the clients and is now widely used in the market.


Euromicron Mould injection custom plastic box customized for andon electronics-1
Euromicron Mould injection custom plastic box customized for andon electronics-2


◇◆ Product parameters


Part Name:Electronic connector
Part size:45*39.5*21mm
Raw Material:PA9T30GF
Color:RAL9005,Black
Mould Cavity No.:1*4
Injection gate:Hot runner 
Surface finished: VDI3400-33
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:250T
Cycle time:40S
Mold life:100000 shots
Customer:Bitron
Export:Italy


◇◆ PRODUCT FEATURES
A connector shell was supposed to be molded in glass-fiber-reinforced,flame-retardant nylon.
Euromicron Mould injection custom plastic box customized for andon electronics-3

This connector include two different parts(upper and lower halves),were to be produced in a single mold.Prior to the start of production,the question arose as to whether a second gate might not be required to fill the part.To avoid weld lines and entrapped air.however,it might also be necessary to use only a single gate.This flexibility as to gating was supposed to be possible simple by switching a hot runner nozzle on or off.A further difficulty resulted from the small amount of space in which  the gates were to be located on the face of the molded part.All of these requirements were satisfied through the particular arrangement of the conductive,internally heated hot-runner system.

Euromicron Mould injection custom plastic box customized for andon electronics-4

Mold design-We made this mold with four cavity.Runner system consists of a heated sprue bushing,a hot-runner manifold and four hot-runner nozzles.The hot-runner nozzles have not been installed parallel to the longitudinal axis of the mold,but rather at an angle.In spite of the unfavorable geometric relationships,it is possible to gate each part on its face in this manner.This arrangement is possible,because the solidified melt in the outer regions of the hot-runner manifold and nozzle channels precludes any possibility of leakage.Each of the hot-runner nozzle is individually controlled and can thus be switched on or off as required.It is thus possible to fill the part through either on or two gates.These measures alone,however,would not have been adequate to vary the gating possibilities.Attention also have to be given to the hot-runner manifold to ensure that no melt stagnated at continuously high temperatures in the runner channels when the various gating possibility were being employed.




Company Features
1. Euromicron Mould Engineering Limited ranks first in the plastic case for electronics field of the whole country.
2. We have QC team to help check the details of custom plastic box .
3. Euromicron Mould Engineering Limited is dedicated to creating a beat plastic enclosure products system for customers. Get quote! The present goal for Euromicron Mould would be to enhance client satisfaction while retaining the first-rate of this item. Get quote! Euromicron Mould Engineering Limited focuses on offering five-star customer service for customers. Get quote! At Euromicron Mould Engineering Limited, we believe in delivering best electronic parts . Get quote!
During the design of Euromicron Mould plastic enclosure, some crucial elements have been considered, such as stress distribution, biomechanical about foot development, comfort and cushion level to the feet, etc. Logo printing is available for the product
As with all garment design development, the design of Euromicron Mould plastic enclosure takes many things into account. They are mainly the correct choice of fabric, accessories, and manufacturing technology. Manufactured by sturdy materials, the product can serve customers for many years
Euromicron Mould electronic parts is required to be tested by the third-party labs. It will be tested with regard to dimensional stability, durability, softness, breathability, and abrasion or pilling performance. With the direct sale, the product is very competitive
Euromicron Mould plastic enclosure has been tested from different aspects. It has passed tests of cushioning performance, structural rigidity, sweat/moisture absorption, and antibacterial performance. Materials of the product are environmentally friendly
The fabrics of Euromicron Mould custom plastic box have been rigorously tested before used. They are tested using various methods such as combustion, staining, or shrinking. The product is provided by the rapid air transportation of DHL or UPS
custom plastic box is considered as the most promising custom plastic box to custom plastic box. The product is booked with a favorable 30% of payment in advance
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...