loading

Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould immunoassay Plastic Monitoring shell from China for trader
Euromicron Mould immunoassay Plastic Monitoring shell from China for trader

Euromicron Mould immunoassay Plastic Monitoring shell from China for trader
  • Euromicron Mould immunoassay Plastic Monitoring shell from China for trader
  • Euromicron Mould immunoassay Plastic Monitoring shell from China for trader
  • Euromicron Mould immunoassay Plastic Monitoring shell from China for trader

Euromicron Mould immunoassay Plastic Monitoring shell from China for trader

Product N...
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


Product Name:monitoring shell 
Product size:607*559*461mm 
Part visible surface:Texturing
Product material:PC+ABS
Shrinkage rate %:0.6
Cavity quantity:1*1
Injection machine type:500T
Cycle time:45S
Product Take out way:Manipulator/Cupula
Cooling system:cold runner
Cavity and core steel:718H
Mold base standard:HASCO
Terminal Customer:Siemens 
Export:Germany


◇◆ Product Features
Euromicron Mould immunoassay Plastic Monitoring shell from China for trader-1

In this set of products, the surface shell mold can adopt large nozzle mold or hot nozzle to cool the flow channel mold, which can not only meet customer requirements but also reduce the cost of the mold;
Among them, the way of glue injection is diving, but the glue inlet is different from the common conical shape but similar to duck mouth shape, which can reduce the pressure of glue injection and prevent shrinkage lines.
This product made in ABS+PC material, which can improve the heat resistance, impact resistance and tensile properties of ABS and enable ABS to be used in high-end fields.
On the other hand, it can reduce the melt viscosity of PC, improve the fluidity of PC, improve its processing performance, reduce the internal stress of products, reduce the sensitivity of impact strength to gap and thickness, so that PC can be used for the manufacture of thin-wall long process products.

Euromicron Mould immunoassay Plastic Monitoring shell from China for trader-2

Since the front mold of this product has bone position and screw column, in order to prevent adhesion of the front mold, the slider can be used in the middle part of the product to force the rear mold.
In the aspect of medical product assembly, it is best to be supplemented by hot-melt method, or adopt the method of fastening seal and front shell as a whole to strengthen the degree and increase the tightness. All external interfaces shall be protected and sealed by rubber protective cover to prevent internal pollution of the product.




The production of Plastic Monitoring shell always takes Plastic Monitoring shell into account. It is also characterized by high mechanical strength
Our Plastic Monitoring shell are constantly updated to follow the trend.
Plastic Monitoring shell produced by Euromicron Mould Engineering Limited are mainly characterized by their Plastic Monitoring shell. It is widely used for its great load bearing capacity
The material of Plastic Monitoring shell allows Plastic Monitoring shell to make itself Plastic Monitoring shell. The product has an improved tensile strength
The special composition of Plastic Monitoring shell makes it obtain good performance of Plastic Monitoring shell. The product has an improved tensile strength
Our Plastic Monitoring shell not only has excellent quality, but also has an affordable price, and the overall cost performance is relatively high.
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...