Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  >  AI - Page Sitemap  >  Euromicron Mould high productivity plastic prototype customized for electronic components
Euromicron Mould high productivity plastic prototype customized for electronic components

Euromicron Mould high productivity plastic prototype customized for electronic components
  • Euromicron Mould high productivity plastic prototype customized for electronic components
  • Euromicron Mould high productivity plastic prototype customized for electronic components

Euromicron Mould high productivity plastic prototype customized for electronic components

◇◆...
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Made of high-quality materials, Euromicron Mould plastic prototype provides a touch of class and beauty. The pattern and color of the product can be changed during production
2. This product has the ability to change completely the look and mood of a space. So it is worth investing in it. Its appearance is stylish and creates a stereoscopic sense
3. This garment is durable. There are chemicals or mechanical finishes being applied to the woven fabric to improve the durability, and/or utility values. Company logo can be printed on the surface of the product
4. This product can work stably under a range of voltage. It has been check for its reliability in different voltage conditions, such as input voltage, surge voltage or low voltage. The product is mainly exported to Europe and North America
5. The product features the desired safety and reliability. It has the function of protection from overvoltage, overcurrent, and overheating and will is not likely to cause suddenly stoppage. With the development of science and technology, the product is upgraded quickly


Euromicron Mould high productivity plastic prototype customized for electronic components-1


◇◆ Product parameters


Part Name:switch
Part size:92.8*61.2*8.6mm
Raw Material:ABS
Color:RAL9010,White
Mould Cavity No.:1*4
Injection gate:Cold runner with sub gate
Surface finished: Polishing #600
Core &Cavity steel:M310,hardness 52~55HRC
Mold component standard:DME or equivalent
Injection machine size:250T
Cycle time:35S
Mold life:300000 shots
Customer:Siemens
Export:Uruguay


◇◆ Summary for project running
This product used for electrical appliance,the light switch.Plastic raw material need in inflaming retarding and heat resistant.
Euromicron Mould high productivity plastic prototype customized for electronic components-2

We carried out first trial shot on 35th day,twice trial shots for samples production,and finished whole project in 45days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request. Due to many thin and high side ribs,part stick on core side tightly.Mold need smooth polishing and need enough ejection pins and as big as possible.Sink mark problem on surface easily to cause,due the part thickness is too thick and not equal,we solved it by adjusting injection parameter.Four hooks distance need to be molding in high precision location,Because they will assemble to bottom shelf.To make it work well,we cut material at first trial shot.After checking first samples,made correction to mold.So that the secondary samples met assembly requirement.

Euromicron Mould high productivity plastic prototype customized for electronic components-3

Another problem we met on first trial shot was the ribs short shot.Because they were very thin and high,plastic filling easily to get cold when injection.Later we had a discussion,decided to change the side gate to two sub gates,change core cooling water to hot oil,100℃,and add injection pressure,so that filling time shorten a lot,finally we got excellent part. This experience also can apply to similar product with thin and high ribs.



Company Features
1. Integrating plastic case for electronics and plastic enclosures for electronics together makes Euromicron Mould more unique.
2. With advanced production equipment and testing instruments, the overall technical level of Euromicron Mould Engineering Limited is in a leading position in China.
3. Euromicron Mould Engineering Limited has made relative regulations to guarantee first-class service. Get price!
Environmental testing is one of the main steps in the production of Euromicron Mould plastic prototype. Strict inspection is carried our to eliminate toxic substances such as mercury and lead. The Gost certificate has been obtained for the Russian market
Most of the mechanical parts of Euromicron Mould plastic enclosures for electronics have to be processed in a professional way. The production process of these parts includes forging, welding, anodizing, polishing, etc, and some parts need precision casting. The product is highly praised in many exhibitions such as Shanghai Electronica China Show
As for the design of Euromicron Mould plastic case for electronics, it is stylish. It adopts newer design concepts and follows the ongoing computer-assisted design trend. It has been marketed successfully for 12 years, thanks to the excellence in quality and technology
Euromicron Mould plastic prototype is carefully designed by considering many factors. For example, part tolerances, size limitations, materials performance, and operational efficiency factors have been taken into considerations. The product is well used in many large engineering projects
Quality debugging will be carried out when Euromicron Mould plastic prototype is produced. The debugging aspects include parts' connection, configuration, structural stability, and other mechanical performance. A team of experienced talents is gathered to support the product sales
To ensure durability, our highly skilled QC professionals rigorously inspect the product. The product performs well in program control and material use reduction
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...