Euromicron Mould Engineering Limited was found in 1995

Home  >  Customized Application  >  Electrommunication For sell  >  Euromicron Mould high productivity plastic enclosures for electronics electronics for electronic components
Euromicron Mould high productivity plastic enclosures for electronics electronics for electronic components

Euromicron Mould high productivity plastic enclosures for electronics electronics for electronic components

Part Name
Electronic connector
Part size
18*15*3mm
Raw Material
NYLON+30%GF
Color
RAL9005,Black
Mould Cavity No
16+16
Injection gate
Cold runner
Surface finished
Polishing #600
Enterprise Strength
  • Our excellence comes from the efforts of staff from such departments as R&D department, sales department, design department and production department. There are designers, R&D experts, and after-sales personnel in our company.
  • Euromicron is committed to offering the best service to meet the needs of customers.
  • Euromicron always sticks to our tenet of "quality comes first" by focusing on the quality control, service improvement, and fast response.
  • We have been dedicated to the manufacturing of cnc service for about years, and have become the leading enterprise in the industry. This enables us to introduce and operate a complete set of production equipment, and achieve intelligentization and standardization.
  • Since the establishment, our sales network has been continuously expanding to where our sales service is highly appraised by customers at home and abroad. In future, we would like to establish our marketing network overseas and expand the business further.
Product Comparison
Euromicron insists on the use of high-quality materials and advanced technology to manufacture cnc service. Besides, we strictly monitor and control the quality and cost in each production process. All this guarantees the product to have high quality and favorable price.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.cnc service produced by Euromicron stands out among many products in the same category. And the specific advantages are as follows.
Company Advantages
1. Compliance with recognized safety standards is necessary for Euromicron Mould plastic enclosures for electronics to be recognized. These can be in the form of test reports from recognized testing laboratories.
2. The product has a fine tenacity. It can withstand the influence of exterior force such as incision, peening, bending, and pulling.
3. It will surely accommodate customers' unique temperament and taste.
4. electrical molding has more advantages compared to other competing products.


Part Name:Electronic connector
Part size:18*15*3mm
Raw Material:NYLON+30%GF
Color:RAL9005,Black
Mould Cavity No.:16+16
Injection gate:Cold runner 
Surface finished: Polishing #600
Core &Cavity steel:1.2344, hardness 48~52HRC
Mold component standard:DME or equivalent
Injection machine size:120T
Cycle time:18S
Mold life:300000 shots
Customer:AEC
Export:USA


◇◆ Summary for project running
This product used for electrical connector. And was supposed to be molded in glass-fiber-reinforced, flame-retardant nylon.

There are many small pin holes on part. Hole’s diameter is 0.6mm with 2.2mm distance of each. Dimension tolerance should be within +/-0.01mm.   Mold design-We will make this mold with 2+2cavity, cold runner in to banana gate. To make parts leave on core side, parting line should be on top. And all pin holes location need to be inserted. Because the hole diameter and distance need to keep in strict tolerance. Separated insert make it easy to replace. Need to pay high attention to electrode making and EDM process. We made whole electrode include all pin holes position, then checked by CMM machine, until shown it was made in proper dimension, took to Mirror EDM manufacture.

Injection-Any mismatch or flash in switch(female half) hole would cause male half pin bend, so this request holding pressure not too high. but also guarantee not cause sink mark on outside surface. Although the part and mold is small, enough cooling line still necessary. Because the part quantity in demand is one million each month, we need to cut down cycle time as much as possible. So that we can save production cost.




Company Features
1. Euromicron Mould Engineering Limited is a high-tech enterprise committed to researching and manufacturing electrical molding .
2. Modern production machinery and equipment are at our disposal. Most of them are computer-aided, ensuring the high precision, repeatability, and perfect production results that our customers expect.
3. The aim of Euromicron Mould Engineering Limited is to provide globally sustainable high-value products and services. Check it! Euromicron Mould aims to provide the best electronic parts while offering the most professional service. Check it! Euromicron Mould Engineering Limited aims to help customers throughout the service process to obtain the maximum satisfaction. Check it!
Chat Online 编辑模式下无法使用
Leave Your Message inputting...