Related Products
Euromicron Mould Engineering Limited was found in 1995
We set sprue bushing on round opening,when fill with sub gate from both sides.Ejector sleeve need locate on boss to help release part.Pin or insert for high side rib to help air venting,also for easily manufacture or EMD process.A slider would be need for side undercut.Since all outside surface are visible,no slider split line is allowed.This mean a tunnel slider would be needed on core side.Mold base size would be 600X400mm with height 350mm.The design of the mold provide for simultaneous opening of the two parting lines with the aid of two racks and a pinion for each side.As it is essential that no gate marks show on the front of the molded parts,injection had to take place on the inside.
This cover transfer heat quickly to mold surfaces.so that increased outlay on the cooling system is worthwhile in molds for such parts.Cooling of the core should be given special attention.Also some of the inserts are thin and very high.A beryllium/copper cap with six radial cooing channels is placed on the core insert.These cooling channel require drilling of the center of rube leading to the cap.This drilling weakens the center tube and there is the risk of rupture if the mounting nuts are tightened excessively.Compression spring are provided to permit an exactly defined tightening torque.Coolant is supplied to the cooling channels in the slides via tubes threaded into the slides.Slots in the guide strips allow these tubes to follow the motion of the slides.
| Wishmoulds Mold Description | |
| Mold Type | Plastic injection mold, overmolding, Interchangeable Mold, insert molding, compression mold, stamping, die casting mold, etc |
| Design software | UG, ProE, Auto CAD, Solidworks, etc. |
| Main services | Prototypes, Mold design, Mold making, Mold tesing, low volume/high volume plastic production |
| Certificate | ISO 9001:2008 |
| Steel material | 718H,P20,NAK80,S316H,SKD61, etc. |
| Plastic production Raw material | PP,Pa6,PLA,AS,ABS,PE,PC,POM,PVC, PET,PS,TPE/TPR etc |
| Mold base | HASCO ,DME ,LKM,JLS standard |
| Mold runner | Cold runner, hot runner |
| Mold hot runner | DME, HASCO, YUDO,etc |
| Mold cold runner | point way, side way, follow way, direct gate way,etc. |
| Mold strandard parts | DME, HASCO, etc. |
| mold life | >300,000 shots |
| Mold hot treatment | quencher, nitridation, tempering,etc. |
| Mold cooling system | water cooling or Beryllium bronze cooling, etc. |
| Mold surface | EDM, texture, high gloss polishing |
| Hardness of the steel | 20~60 HRC |
| Equipments | High speed CNC, standard CNC, EDM, Wire cutting, Grinder, Lathe, Milling machine, plastic injection machine |
| Lead time | 25~30 days |
| Month Production | 50 sets/month |
| Mold Packing | standard exporting Wooden case |
Samples for reference
Hot China Products Wholesale Oem Plastic Injection Mold For Toilet Seat
Our Service:
1.Our company specializes in plastic injection molding as well as mould making and product assembly.
2. We can produce any part, big or small, perform post processing, assembly or packaging according to the customer requirement.
3.We can use your existing mould or produce one in our factory. With 18 years of experience we can handle any of your projects.
4. We can also assist you with the particular design of your product and subsequently produce it by plastic injection molding.
5.processing methods: processing with supplied drawings
6.standard or nonstandard: we both process standard and nonstandard forgings.
7.we can serve sample before big order.
8.we can reproduce if quality is not good.
9.after sale service: all the casting will be checked strictly, if the defects are found, we will produce new ones or make it for back order.
| name product | small bactch plastic injection Mold |
| mold base material | S136,45#,P20,718,2738, SH136, SKD61 et |
| mold base | FUTABA,LKM,HASCO etc. |
| Cavity Qty | Single-cavity |
| Rubber | Yudo / Mastip / HASCO/DME/MOLD-MASTER Hot runner or Cold runner |
| Gate type | Side gate, Sub gate, Pin point gate, Edge gate etc |
| treatment | Heat treatment and Nitriding,polish ect. |
| Mould life | rapid injection mold : 5,000-50000pcs, normal mold : 500,000- 1,000,000pcs. |
| Design software | CAE Moldflow,UG,PROE,CAD etc |
| Mold Specification checking | 3D CMM, Projector |
| mold making equipment | CNC machines, EDM-cuting machines, EDM machines , drilling machines, polishing machines, Grinding machines ..ect |
| delivery time | 5-15 working days |
| special requirement | according to customer's requirement. |
Trade information:
1. Q: What’s the MOQ (minimum order quantity)?
A: One piece.
2. Q: What’s the best FOB price?
A: Our price is made as per your drawing specification as well as the purchasing quantity.
3. Q: What’s the lead time?
A: Normally, it takes around 30 days.
4. Q: What’s the payment term?
A: FOB Ningbo, paid by T/T,. We will ask for down payment before production, and the balance paid off before shipment. Of course, we may also negotiate it.
5. Q: What kind of packing can you provide?
A: Tailor-made packaging method according to customer's requirement, otherwise, we will make the sea-worthy packing.
6. Q: Which countries have you exported?
A: Germany, Denmark, Spain, Holland, Italy, Japan, America, etc.
Service and quality information:
7. Q: Can you make as per custom drawing?
A: Yes, we can do that.
8. Q: If I don’t have drawing, what can you do for me?
A: If you don’t have drawing, but have the sample part, you may send us. We will check if we can make it or not.
9.Q: Can you supply my logo or part number on the parts?
A:Yes, we can. Please provide sample or drawing.
EMM has a project management team with fluent English in technical communication, experienced
mold design team.
CONTACT PERSON
Marketing :
General Manager :
Manufacturing Director :
Technical Director:
Copyright © 2018 Euromicron Mould Engineering Limited | All Rights Reserved
