Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  > 

AI - Page Sitemap

 > 

Euromicron Mould high productivity electronic housing customized for andon electronics

Euromicron Mould high productivity electronic housing customized for andon electronics

Euromicron Mould high productivity electronic housing customized for andon electronics

Part Name
switch
Part size
92.8*61.2*8.6mm
Raw Material
ABS
Color
RAL9010,White
Mould Cavity No
1*4
Injection gate
Cold runner with sub gate
Surface finished
Polishing #600
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Euromicron Mould plastic electrical enclosures is developed based on cutting edge energy-saving technologies. All its electric components, such as connector, conductor, and printed circuit board, are sophisticatedly manufactured. Company logo can be printed on the surface of the product
2. The product has a growing application potential. It is suitable for use in the high-temperature environment
3. The product has the characteristics of long service, excellent performance and stable performance. The product has an output of 50 sets per month
4. We implement quality control system to ensure products without defects. Supported by the world-class manufacturing management system, it is of stable quality


Euromicron Mould high productivity electronic housing customized for andon electronics-1


◇◆ Product parameters


Part Name:switch
Part size:92.8*61.2*8.6mm
Raw Material:ABS
Color:RAL9010,White
Mould Cavity No.:1*4
Injection gate:Cold runner with sub gate
Surface finished: Polishing #600
Core &Cavity steel:M310,hardness 52~55HRC
Mold component standard:DME or equivalent
Injection machine size:250T
Cycle time:35S
Mold life:300000 shots
Customer:Siemens
Export:Uruguay


◇◆ Summary for project running
This product used for electrical appliance,the light switch.Plastic raw material need in inflaming retarding and heat resistant.
Euromicron Mould high productivity electronic housing customized for andon electronics-2

We carried out first trial shot on 35th day,twice trial shots for samples production,and finished whole project in 45days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request. Due to many thin and high side ribs,part stick on core side tightly.Mold need smooth polishing and need enough ejection pins and as big as possible.Sink mark problem on surface easily to cause,due the part thickness is too thick and not equal,we solved it by adjusting injection parameter.Four hooks distance need to be molding in high precision location,Because they will assemble to bottom shelf.To make it work well,we cut material at first trial shot.After checking first samples,made correction to mold.So that the secondary samples met assembly requirement.

Euromicron Mould high productivity electronic housing customized for andon electronics-3

Another problem we met on first trial shot was the ribs short shot.Because they were very thin and high,plastic filling easily to get cold when injection.Later we had a discussion,decided to change the side gate to two sub gates,change core cooling water to hot oil,100℃,and add injection pressure,so that filling time shorten a lot,finally we got excellent part. This experience also can apply to similar product with thin and high ribs.



Company Features
1. With a complete supply chain, Euromicron Mould has achieved a lot in the electronic housing industry.
2. Euromicron Mould Engineering Limited has a high-quality professional and technical team.
3. We are working with our clients: to provide them with products in a more environmentally friendly manner by reducing production waste.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...